Re: [PATCHSET block#for-2.6.36-post] block: replace barrier with sequenced flush

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/23/2010 08:48 AM, Christoph Hellwig wrote:
On Mon, Aug 23, 2010 at 02:30:33PM +0200, Tejun Heo wrote:
It might be useful to give several example configurations with
different cache configurations.  I don't have much experience with
battery backed arrays but aren't they suppose to report write through
cache automatically?

They usually do.  I have one that doesn't, but SYNCHRONIZE CACHE on
it is so fast that it effectively must be a no-op.


Arrays are not a problem in general - they normally have internally, redundant batteries to hold up the cache.

The issue is when you have an internal hardware RAID card with a large cache. Those cards sit in your server and the batteries on the card protect its internal cache, but do not have the capacity to hold up the drives behind it.

Normally, those drives should have their write cache disabled, but sometimes (especially with S-ATA disks) this is not done.

ric

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux