Re: [PATCH 1/1] scsi/block: increase flush/sync timeout v2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2010-08-11 18:06, michaelc@xxxxxxxxxxx wrote:
> From: Mike Christie <mchristi@xxxxxxxxxx>
> 
> We have been seeing the flush request timeout with a wide
> range of hardware from tgt+iser to FC targets from a major vendor.
> 
> After discussions about if the value should be configurable and
> what the best value should be, this patch just increases the flush/sync
> cache timeout to 1 minute. 2 minutes was determined to be too long, and
> making it configurable was troublesome for users.
> 
> This patch was made over Linus's tree. It is not made over scsi-misc
> or scsi-rc-fixes, because Linus's had block layer changes that my
> patch was built over.
> 

Looks fine to me. James? Leaving patch below.

Acked-by: Jens Axboe <jaxboe@xxxxxxxxxxxx>


>  drivers/scsi/sd.c |    4 ++--
>  drivers/scsi/sd.h |    1 +
>  2 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
> index 8e2e893..f7e79e3 100644
> --- a/drivers/scsi/sd.c
> +++ b/drivers/scsi/sd.c
> @@ -477,7 +477,7 @@ static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
>  
>  static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
>  {
> -	rq->timeout = SD_TIMEOUT;
> +	rq->timeout = SD_FLUSH_TIMEOUT;
>  	rq->retries = SD_MAX_RETRIES;
>  	rq->cmd[0] = SYNCHRONIZE_CACHE;
>  	rq->cmd_len = 10;
> @@ -1072,7 +1072,7 @@ static int sd_sync_cache(struct scsi_disk *sdkp)
>  		 * flush everything.
>  		 */
>  		res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
> -				       SD_TIMEOUT, SD_MAX_RETRIES, NULL);
> +				       SD_FLUSH_TIMEOUT, SD_MAX_RETRIES, NULL);
>  		if (res == 0)
>  			break;
>  	}
> diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
> index f81a930..315ce9d 100644
> --- a/drivers/scsi/sd.h
> +++ b/drivers/scsi/sd.h
> @@ -19,6 +19,7 @@
>   */
>  #define SD_TIMEOUT		(30 * HZ)
>  #define SD_MOD_TIMEOUT		(75 * HZ)
> +#define SD_FLUSH_TIMEOUT	(60 * HZ)
>  
>  /*
>   * Number of allowed retries


-- 
Jens Axboe

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux