Hi, I'm trying to compile a kernel with aacraid support on a dual Opteron 246 box with two 36GB disks on a Tyan S2891, using an initrd and lilo. There is an older kernel on there that works just fine, so I suspect it's something I'm missing in the kernel config. No matter what I try, the kernel fails to find the disks on the controller. I've even tried building it without an initrd and compiling everything into the kernel, but it still panics. I've included the aacraid support, SCSI disk, SCSI generic, and even RAID1/5 support. The controller and motherboard also have the latest BIOS updates. What else is necessary to support aacraid? It only prints the following when booting: Adaptec aacraid driver 1.1-5[2456]-ms Is I2O or ACPI support necessary? Are there any boot-time options to increase debugging output to troubleshoot this? The dmesg output from a working system is here: http://pastebin.com/0AnVBV7s The kernel config for the attempt is here: http://pastebin.com/gi9ybDwS Thanks for any ideas. Best regards, Alex -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
