Re: [PATCH 04/11] qla4xxx: set correct value in sess->recovery_tmo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Actually, I am going to take back my ACK/review-by on this.

After discussing with Qlogic what the ka_timeout really is, it seems it is the wrong value to use. When the session->recovery_tmo is running the session is down so iscsi nops cannot be sent.



On 06/16/2010 03:51 PM, Vikas Chaudhary wrote:
Signed-off-by: Vikas Chaudhary<vikas.chaudhary@xxxxxxxxxx>
Signed-off-by: Ravi Anand<ravi.anand@xxxxxxxxxx>
---
  drivers/scsi/qla4xxx/ql4_def.h  |    3 +--
  drivers/scsi/qla4xxx/ql4_init.c |    6 +++---
  drivers/scsi/qla4xxx/ql4_mbx.c  |    1 -
  drivers/scsi/qla4xxx/ql4_os.c   |    4 ++--
  4 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 4288026..2b53c79 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -239,12 +239,12 @@ struct ddb_entry {
  	uint32_t default_time2wait; /* Default Min time between
  				     * relogins (+aens) */

-	atomic_t port_down_timer; /* Device connection timer */
  	atomic_t retry_relogin_timer; /* Min Time between relogins
  				       * (4000 only) */
  	atomic_t relogin_timer;	/* Max Time to wait for relogin to complete */
  	atomic_t relogin_retry_count; /* Num of times relogin has been
  				       * retried */
+	uint16_t ka_timeout;

  	uint16_t port;
  	uint32_t tpgt;
@@ -394,7 +394,6 @@ struct scsi_qla_host {
  	uint32_t timer_active;

  	/* Recovery Timers */
-	uint32_t port_down_retry_count;
  	uint32_t discovery_wait;
  	atomic_t check_relogin_timeouts;
  	uint32_t retry_reset_ha_cnt;
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index d525405..6cdfe9f 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -548,6 +548,9 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
  	ddb_entry->default_relogin_timeout =
  		le16_to_cpu(fw_ddb_entry->def_timeout);
  	ddb_entry->default_time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait);
+	ddb_entry->ka_timeout = le16_to_cpu(fw_ddb_entry->ka_timeout);
+	if (ddb_entry->sess)
+		ddb_entry->sess->recovery_tmo = ddb_entry->ka_timeout;

  	/* Update index in case it changed */
  	ddb_entry->fw_ddb_index = fw_ddb_index;
@@ -633,7 +636,6 @@ static struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha,
  	}

  	ddb_entry->fw_ddb_index = fw_ddb_index;
-	atomic_set(&ddb_entry->port_down_timer, ha->port_down_retry_count);
  	atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY);
  	atomic_set(&ddb_entry->relogin_timer, 0);
  	atomic_set(&ddb_entry->relogin_retry_count, 0);
@@ -1500,8 +1502,6 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
  	/* Device is back online. */
  	if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) {
  		atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
-		atomic_set(&ddb_entry->port_down_timer,
-			   ha->port_down_retry_count);
  		atomic_set(&ddb_entry->relogin_retry_count, 0);
  		atomic_set(&ddb_entry->relogin_timer, 0);
  		clear_bit(DF_RELOGIN,&ddb_entry->flags);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 75496fb..aa12ffd 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -287,7 +287,6 @@ qla4xxx_update_local_ifcb(struct scsi_qla_host *ha,
  	       min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/

  	/* Save Command Line Paramater info */
-	ha->port_down_retry_count = le16_to_cpu(init_fw_cb->conn_ka_timeout);
  	ha->discovery_wait = ql4xdiscoverywait;

  	if (ha->acb_version == ACB_SUPPORTED) {
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 38b1d38..11a4bd1 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -155,7 +155,7 @@ static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session)
  		DEBUG2(printk("scsi%ld: %s: index [%d] port down retry count "
  			      "of (%d) secs exhausted, marking device DEAD.\n",
  			      ha->host_no, __func__, ddb_entry->fw_ddb_index,
-			      ha->port_down_retry_count));
+			      ddb_entry->ka_timeout));

  		DEBUG2(printk("scsi%ld: %s: scheduling dpc routine - dpc "
  			      "flags = 0x%lx\n",
@@ -286,7 +286,7 @@ int qla4xxx_add_sess(struct ddb_entry *ddb_entry)
  {
  	int err;

-	ddb_entry->sess->recovery_tmo = ddb_entry->ha->port_down_retry_count;
+	ddb_entry->sess->recovery_tmo = ddb_entry->ka_timeout;
  	err = iscsi_add_session(ddb_entry->sess, ddb_entry->fw_ddb_index);
  	if (err) {
  		DEBUG2(printk(KERN_ERR "Could not add session.\n"));

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux