Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2010-06-11 10:32, Ingo Molnar wrote:
> 
> * Jens Axboe <jaxboe@xxxxxxxxxxxx> wrote:
> 
>> On 2010-06-09 03:53, Linus Torvalds wrote:
>>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
>>>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
>>>> Submitter	: Jan Kreuzer <kontrollator@xxxxxx>
>>>> Date		: 2010-06-05 06:15 (4 days old)
>>>
>>> This seems to have been introduced by
>>>
>>> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
>>> 	Author: Ingo Molnar <mingo@xxxxxxx>
>>> 	Date:   Sat Nov 8 17:05:38 2008 +0100
>>>
>>> 	    sched: optimize sched_clock() a bit
>>>     
>>> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
>>> 	    variant of __cycles_2_ns().
>>>     
>>> 	    Most of the time sched_clock() is called with irqs disabled already.
>>> 	    The few places that call it with irqs enabled need to be updated.
>>>     
>>> 	    Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
>>>
>>> and this seems to be one of those calling cases that need to be updated..
>>>
>>> Ingo? The call trace is:
>>>
>>> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
>>> 	caller is native_sched_clock+0x3c/0x68
>>> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
>>> 	Call Trace:
>>> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
>>> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
>>> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
>>> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
>>> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
>>> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
>>> 	[<ffffffff81215537>] __make_request+0x338/0x45b
>>> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
>>> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
>>> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
>>> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
>>> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
>>> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
>>> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
>>> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
>>> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
>>> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
>>> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
>>> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
>>>
>>> (from the bugzilla thing)
>>
>> This should be fixed by commit 28f4197e which was merged on friday.
> 
> Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
> configs i get bad spinlock warnings during bootup:
> 
> [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
> [   28.972003] calling  b44_init+0x0/0x55 @ 1
> [   28.976009] bus: 'pci': add driver b44
> [   28.976374]  sda:
> [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
> [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
> [   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
> [   28.980000] Call Trace:
> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
> [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
> [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
> [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
> [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
> [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
> [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
> [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> [   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
> [   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
> [   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
> [   28.980000]  [<4132dd64>] __make_request+0x335/0x376
> [   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
> [   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> [   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
> [   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
> [   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
> [   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
> [   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
> [   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
> [   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
> [   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
> [   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
> [   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
> [   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
> [   28.980000]  [<41088904>] read_cache_page+0xb/0x12
> [   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
> [   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> [   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
> [   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
> [   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
> [   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
> [   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
> [   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
> [   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
> [   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
> [   28.980000]  [<41332815>] add_disk+0x57/0x95
> [   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
> [   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
> [   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
> [   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
> [   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
> [   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
> [   28.980000]  [<410433df>] kthread+0x5f/0x64
> [   28.980000]  [<41043380>] ? kthread+0x0/0x64
> [   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
> [   29.264071] async/1 used greatest stack depth: 2336 bytes left
> [   29.267020] bus: 'ssb': add driver b44
> [   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
> [   29.267076] calling  init_nic+0x0/0x16 @ 1
> 
> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> attached. Reproducible on that sha1 and with that config.

I think I see it, the internal CFQ blkg groups are not properly
initialized... Will send a patch shortly.

-- 
Jens Axboe

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux