1) Last half of a block layer update to support the host-protected area
(HPA) on ATA disks, an ATA feature which controls whether the disk
reports full capacity (normal + host area) or reduced capacity
(normal area only).
2) various fixes
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/Kconfig | 6 +++---
drivers/ata/libata-core.c | 6 +++---
drivers/ata/libata-scsi.c | 29 +++++++++++++++++++++++++++++
drivers/ata/sata_nv.c | 2 --
drivers/ata/sata_via.c | 13 +++++++++++++
drivers/scsi/sd.c | 22 ++++++++++++++++++++++
include/linux/libata.h | 2 ++
include/scsi/scsi_host.h | 8 ++++++++
8 files changed, 80 insertions(+), 8 deletions(-)
Stefan Richter (1):
libata-sff: trivial corrections to Kconfig help text
Tejun Heo (5):
sata_via: magic vt6421 fix for transmission problems w/ WD drives
sata_nv: don't diddle with nIEN on mcp55
SCSI: implement sd_unlock_native_capacity()
libata: use the enlarged capacity after late HPA unlock
libata: implement on-demand HPA unlocking
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 73f8833..aa85a98 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -168,10 +168,10 @@ config ATA_BMDMA
default y
help
This option adds support for SFF ATA controllers with BMDMA
- capability. BMDMA stands for bus-master DMA and the
- de-facto DMA interface for SFF controllers.
+ capability. BMDMA stands for bus-master DMA and is the
+ de facto DMA interface for SFF controllers.
- If unuser, say Y.
+ If unsure, say Y.
if ATA_BMDMA
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 06b7e49..ddf8e48 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4119,9 +4119,8 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) {
ata_dev_printk(dev, KERN_WARNING,
"new n_sectors matches native, probably "
- "late HPA unlock, continuing\n");
- /* keep using the old n_sectors */
- dev->n_sectors = n_sectors;
+ "late HPA unlock, n_sectors updated\n");
+ /* use the larger n_sectors */
return 0;
}
@@ -6669,6 +6668,7 @@ EXPORT_SYMBOL_GPL(ata_dummy_port_info);
EXPORT_SYMBOL_GPL(ata_link_next);
EXPORT_SYMBOL_GPL(ata_dev_next);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
+EXPORT_SYMBOL_GPL(ata_scsi_unlock_native_capacity);
EXPORT_SYMBOL_GPL(ata_host_init);
EXPORT_SYMBOL_GPL(ata_host_alloc);
EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index cfa9dd3..a54273d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -415,6 +415,35 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
}
/**
+ * ata_scsi_unlock_native_capacity - unlock native capacity
+ * @sdev: SCSI device to adjust device capacity for
+ *
+ * This function is called if a partition on @sdev extends beyond
+ * the end of the device. It requests EH to unlock HPA.
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. Might sleep.
+ */
+void ata_scsi_unlock_native_capacity(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct ata_device *dev;
+ unsigned long flags;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ dev = ata_scsi_find_dev(ap, sdev);
+ if (dev && dev->n_sectors < dev->n_native_sectors) {
+ dev->flags |= ATA_DFLAG_UNLOCK_HPA;
+ dev->link->eh_info.action |= ATA_EH_RESET;
+ ata_port_schedule_eh(ap);
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ ata_port_wait_eh(ap);
+}
+
+/**
* ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
* @ap: target port
* @sdev: SCSI device to get identify data for
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 6fd1147..2116113 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1669,7 +1669,6 @@ static void nv_mcp55_freeze(struct ata_port *ap)
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask &= ~(NV_INT_ALL_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
- ata_sff_freeze(ap);
}
static void nv_mcp55_thaw(struct ata_port *ap)
@@ -1683,7 +1682,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask |= (NV_INT_MASK_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
- ata_sff_thaw(ap);
}
static void nv_adma_error_handler(struct ata_port *ap)
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 101d8c2..0ecd0f6 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -575,6 +575,19 @@ static void svia_configure(struct pci_dev *pdev)
tmp8 |= NATIVE_MODE_ALL;
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
+
+ /*
+ * vt6421 has problems talking to some drives. The following
+ * is the magic fix from Joseph Chan <JosephChan@xxxxxxxxxx>.
+ * Please add proper documentation if possible.
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=15173
+ */
+ if (pdev->device == 0x3249) {
+ pci_read_config_byte(pdev, 0x52, &tmp8);
+ tmp8 |= 1 << 2;
+ pci_write_config_byte(pdev, 0x52, tmp8);
+ }
}
static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 829cc37..8802e48 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -97,6 +97,7 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
#endif
static int sd_revalidate_disk(struct gendisk *);
+static void sd_unlock_native_capacity(struct gendisk *disk);
static int sd_probe(struct device *);
static int sd_remove(struct device *);
static void sd_shutdown(struct device *);
@@ -1101,6 +1102,7 @@ static const struct block_device_operations sd_fops = {
#endif
.media_changed = sd_media_changed,
.revalidate_disk = sd_revalidate_disk,
+ .unlock_native_capacity = sd_unlock_native_capacity,
};
static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
@@ -2121,6 +2123,26 @@ static int sd_revalidate_disk(struct gendisk *disk)
}
/**
+ * sd_unlock_native_capacity - unlock native capacity
+ * @disk: struct gendisk to set capacity for
+ *
+ * Block layer calls this function if it detects that partitions
+ * on @disk reach beyond the end of the device. If the SCSI host
+ * implements ->unlock_native_capacity() method, it's invoked to
+ * give it a chance to adjust the device capacity.
+ *
+ * CONTEXT:
+ * Defined by block layer. Might sleep.
+ */
+static void sd_unlock_native_capacity(struct gendisk *disk)
+{
+ struct scsi_device *sdev = scsi_disk(disk)->device;
+
+ if (sdev->host->hostt->unlock_native_capacity)
+ sdev->host->hostt->unlock_native_capacity(sdev);
+}
+
+/**
* sd_format_disk_name - format disk name
* @prefix: name prefix - ie. "sd" for SCSI disks
* @index: index of the disk to format name for
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3bad270..b85f3ff 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1023,6 +1023,7 @@ extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
extern int ata_std_bios_param(struct scsi_device *sdev,
struct block_device *bdev,
sector_t capacity, int geom[]);
+extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
@@ -1174,6 +1175,7 @@ extern struct device_attribute *ata_common_sdev_attrs[];
.slave_configure = ata_scsi_slave_config, \
.slave_destroy = ata_scsi_slave_destroy, \
.bios_param = ata_std_bios_param, \
+ .unlock_native_capacity = ata_scsi_unlock_native_capacity, \
.sdev_attrs = ata_common_sdev_attrs
#define ATA_NCQ_SHT(drv_name) \
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index c50a97f..b7bdecb 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -327,6 +327,14 @@ struct scsi_host_template {
sector_t, int []);
/*
+ * This function is called when one or more partitions on the
+ * device reach beyond the end of the device.
+ *
+ * Status: OPTIONAL
+ */
+ void (*unlock_native_capacity)(struct scsi_device *);
+
+ /*
* Can be used to export driver statistics and other infos to the
* world outside the kernel ie. userspace and it also provides an
* interface to feed the driver with information.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
