Re: aha1542 oops caused by new request_irq routines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 31 May 2010, James Bottomley wrote:

> On Mon, 2010-05-31 at 10:03 -0400, Tedheadster wrote:
> > I'm reliably getting this oops:
> > 
> > Configuring Adaptec (SCSI-ID 6) at IO:334, IRQ 10, DMA priority 6
> > BUG: sleeping function called from invalid context at mm/slub.c:1598
> > in_atomic(): 0, irqs_disabled(): 1, pid: 4782, name: modprobe
> > Pid: 4782, comm: modprobe Not tainted 2.6.30.10-105.2.23.RODATA.fc11.i586 #1
> > Call Trace:
> >  [<c0469e58>] ? request_threaded_irq+0x85/0x145
> >  [<c0422ab7>] __might_sleep+0xc4/0xc9
> >  [<c04a4322>] kmem_cache_alloc_notrace+0x29/0xb0
> >  [<c0469e58>] request_threaded_irq+0x85/0x145
> >  [<d086439c>] ? do_aha1542_intr_handle+0x0/0x2be [aha1542]
> >  [<d08696aa>] aha1542_detect+0x631/0x76f [aha1542]
> >  [<d0869841>] init_this_scsi_driver+0x59/0xc7 [aha1542]
> >  [<d08697e8>] ? init_this_scsi_driver+0x0/0xc7 [aha1542]
> >  [<c040114b>] do_one_initcall+0x51/0x13f
> >  [<c0451111>] sys_init_module+0x8b/0x192
> >  [<c0403535>] syscall_call+0x7/0xb
> > scsi5 : Adaptec 1542
> 
> So this one's a bit tricky.  aha1542 uses a global spinlock to give it
> thread safety and various other things.  In this case it's trying to use
> the lock to hold off the interrupt until everything is set up.
> 
> Now that we're doing a GFP_KERNEL allocation in the interrupt handler
> code you can't disable interrupts while calling request_irq since this
> is an old card liable to spurious interrupts as it gets poked in setup.
>
> I think a possible solution is this, since the mere act of installing an
> interrupt handler shouldn't trigger the problem.
> 
> However, I thought the pattern of disabling interrupts and setting up
> the handler and registers was a common one ... is there some way this is
> supposed to work now that doesn't involve altering the drivers?

Most drivers do the sane thing:

     Disable interrupts at the device level
     Install handler via request_irq()
     Setup stuff
     Enable interrupts at the device level

So no, there is no way this is supposed to work with drivers which
don't follow that simple scheme.

commit 0e43785c5 (irq: use GFP_KERNEL for action allocation in
request_irq()) changed that particular instance to GFP_KERNEL because
the request_irq code calls (and always did) code which cannot be
called in atomic contexts, e.g. the proc entry handling.

Thanks,

	tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux