From: Giridhar Malavali <giridhar.malavali@xxxxxxxxxx>
The CRB drive active register is cleared when driver is unloaded
or when driver enters failed state.
Signed-off-by: Giridhar Malavali <giridhar.malavali@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_gbl.h | 1 -
drivers/scsi/qla2xxx/qla_init.c | 2 ++
drivers/scsi/qla2xxx/qla_iocb.c | 4 ++--
drivers/scsi/qla2xxx/qla_nx.c | 4 ++++
drivers/scsi/qla2xxx/qla_nx.h | 3 +--
drivers/scsi/qla2xxx/qla_os.c | 4 ++++
6 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 8217c3b..2247ef8 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -513,7 +513,6 @@ extern int qla82xx_nvram_config(struct scsi_qla_host *);
extern int qla82xx_pinit_from_rom(scsi_qla_host_t *);
extern int qla82xx_load_firmware(scsi_qla_host_t *);
extern int qla82xx_reset_hw(scsi_qla_host_t *);
-extern int qla82xx_load_risc_blob(scsi_qla_host_t *, uint32_t *);
extern void qla82xx_watchdog(scsi_qla_host_t *);
/* Firmware and flash related functions */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index ab2cc71..f1db11a 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1454,6 +1454,8 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
rval = ha->isp_ops->load_risc(vha, &srisc_address);
if (rval == QLA_SUCCESS)
goto enable_82xx_npiv;
+ else
+ goto failed;
}
if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 8ef9453..5d0e99c 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1683,7 +1683,7 @@ qla2x00_login_iocb(srb_t *sp, struct mbx_entry *mbx)
struct srb_iocb *lio = ctx->u.iocb_cmd;
uint16_t opts;
- mbx->entry_type = MBX_IOCB_TYPE;;
+ mbx->entry_type = MBX_IOCB_TYPE;
SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id);
mbx->mb0 = cpu_to_le16(MBC_LOGIN_FABRIC_PORT);
opts = lio->u.logio.flags & SRB_LOGIN_COND_PLOGI ? BIT_0 : 0;
@@ -1718,7 +1718,7 @@ qla2x00_logout_iocb(srb_t *sp, struct mbx_entry *mbx)
{
struct qla_hw_data *ha = sp->fcport->vha->hw;
- mbx->entry_type = MBX_IOCB_TYPE;;
+ mbx->entry_type = MBX_IOCB_TYPE;
SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id);
mbx->mb0 = cpu_to_le16(MBC_LOGOUT_FABRIC_PORT);
mbx->mb1 = HAS_EXTENDED_IDS(ha) ?
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index ff562de..eb12bf2 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -3279,6 +3279,10 @@ qla82xx_dev_failed_handler(scsi_qla_host_t *vha)
/* Disable the board */
qla_printk(KERN_INFO, ha, "Disabling the board\n");
+ qla82xx_idc_lock(ha);
+ qla82xx_clear_drv_active(ha);
+ qla82xx_idc_unlock(ha);
+
/* Set DEV_FAILED flag to disable timer */
vha->device_flags |= DFLG_DEV_FAILED;
qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index f8f99a5..aa95d38 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -538,11 +538,10 @@
/* Driver Coexistence Defines */
#define QLA82XX_CRB_DRV_ACTIVE (QLA82XX_CAM_RAM(0x138))
#define QLA82XX_CRB_DEV_STATE (QLA82XX_CAM_RAM(0x140))
-#define QLA82XX_CRB_DEV_PART_INFO (QLA82XX_CAM_RAM(0x14c))
-#define QLA82XX_CRB_DRV_IDC_VERSION (QLA82XX_CAM_RAM(0x174))
#define QLA82XX_CRB_DRV_STATE (QLA82XX_CAM_RAM(0x144))
#define QLA82XX_CRB_DRV_SCRATCH (QLA82XX_CAM_RAM(0x148))
#define QLA82XX_CRB_DEV_PART_INFO (QLA82XX_CAM_RAM(0x14c))
+#define QLA82XX_CRB_DRV_IDC_VERSION (QLA82XX_CAM_RAM(0x174))
/* Every driver should use these Device State */
#define QLA82XX_DEV_COLD 1
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index be1a8fc..c345ba7 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2402,6 +2402,10 @@ qla2x00_remove_one(struct pci_dev *pdev)
scsi_host_put(base_vha->host);
if (IS_QLA82XX(ha)) {
+ qla82xx_idc_lock(ha);
+ qla82xx_clear_drv_active(ha);
+ qla82xx_idc_unlock(ha);
+
iounmap((device_reg_t __iomem *)ha->nx_pcibase);
if (!ql2xdbwr)
iounmap((device_reg_t __iomem *)ha->nxdb_wr_ptr);
--
1.6.2.rc1.30.gd43c
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
