From: Stephen M. Cameron <scameron@xxxxxxxxxxxxxxxxxx> hpsa: factor out hpsa_enter_simple_mode Signed-off-by: Stephen M. Cameron <scameron@xxxxxxxxxxxxxxxxxx> --- drivers/scsi/hpsa.c | 62 +++++++++++++++++++++++++++++---------------------- 1 files changed, 35 insertions(+), 27 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 86da45b..bb1b86e 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -3418,9 +3418,41 @@ static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h) writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); } +static int __devinit hpsa_enter_simple_mode(struct ctlr_info *h) +{ + int i; + + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + /* Update the field, and then ring the doorbell */ + writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + + /* under certain very rare conditions, this can take awhile. + * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right + * as we enter this code.) + */ + for (i = 0; i < MAX_CONFIG_WAIT; i++) { + if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) + break; + /* delay and try again */ + msleep(10); + } + +#ifdef HPSA_DEBUG + print_cfg_table(&h->pdev->dev, h->cfgtable); +#endif /* HPSA_DEBUG */ + + if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { + dev_warn(&h->pdev->dev, + "unable to get board into simple mode\n"); + return -ENODEV; + } + return 0; +} + static int __devinit hpsa_pci_init(struct ctlr_info *h) { - int i, prod_index, err; + int prod_index, err; prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id); if (prod_index < 0) @@ -3467,33 +3499,9 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h) } hpsa_enable_scsi_prefetch(h); hpsa_p600_dma_prefetch_quirk(h); - - h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); - /* Update the field, and then ring the doorbell */ - writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); - writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); - - /* under certain very rare conditions, this can take awhile. - * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right - * as we enter this code.) - */ - for (i = 0; i < MAX_CONFIG_WAIT; i++) { - if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) - break; - /* delay and try again */ - msleep(10); - } - -#ifdef HPSA_DEBUG - print_cfg_table(&h->pdev->dev, h->cfgtable); -#endif /* HPSA_DEBUG */ - - if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { - dev_warn(&h->pdev->dev, - "unable to get board into simple mode\n"); - err = -ENODEV; + err = hpsa_enter_simple_mode(h); + if (err) goto err_out_free_res; - } return 0; err_out_free_res: -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html