This is actually the scsi-misc tree plus one fix for 2.6.34 I didn't
manage to send in time (now tagged for stable). It contains the usual
driver updates (qla2, qla4, lpfc, bfa, zfcp, fusion, mpt2sas, zfcp) plus
one non marvell update for mvsas which seems to ease some of that
driver's current problems. This patch also adds SCSI to the trace
infrastructure, with some dependent trace changes (acked by Steve
Rostedt).
The patch is available from:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
The short changelog is:
Adam Radford (2):
3ware maintainers update
3w-xxxx, 3w-9xxx: force 60 second timeout
Alan Stern (2):
don't kfree an initialized struct device
don't reap targets upon device_add failure
Andrew Vasquez (6):
qla2xxx: Cleanup FCP-command-status processing debug statements.
qla2xxx: Limit mailbox command contention for ADISC requests.
qla2xxx: Further generalization of SRB CTX infrastructure.
qla2xxx: Display proper link state for disconnected ports.
qla2xxx: Check for ISP84xx before processing to get 84xx firmware version.
qla2xxx: General checkpatch corrections.
Anil Veerabhadrappa (3):
bnx2i: Update version and module description
bnx2i: link bnx2i hba and cnic device before registering the device
bnx2i: make firmware use statsn field when constructing header
Arun Easi (1):
qla2xxx: T10 DIF support added.
Avi Kaplan (2):
iscsi_tcp: Remove unused field iscsi_conn from struct iscsi_sw_tcp_conn
iscsi_tcp: Change iscsi_sw_tcp_conn_restore_callbacks arguments
Brian King (2):
ibmvfc: Reduce error recovery timeout
ibmvfc: Fix command completion handling
Brian Uchino (2):
fnic: Change fnic_flush_tx() to flush tx instead of rx queue
fnic: Update version to 1.4.0.145
Chris Leech (4):
libfc, fcoe: normalize format specifies for world wide names
libfc: set both precision and field with when printing FC IDs
fcoe: check netif operstate instead of IFF_UP & link state
fcoe: reset FIP ctlr link state on disable/enable
Christof Schmitt (7):
zfcp: Zero memory for gpn_ft and adisc requests
zfcp: Use status_read_buf_num provided by FCP channel
zfcp: Move sbal_get function to zfcp_qdio.c
zfcp: Move sbale handling to zfcp_qdio files
zfcp: Report scatter-gather limits to SCSI and block layer
zfcp: Pass return code from fc_block_scsi_eh to scsi eh
Allow FC LLD to fast-fail scsi eh by introducing new eh return
Dan Carpenter (2):
pm8001: potential null dereference in pm8001_dev_gone_notify()
iscsi_tcp: change & to &&
Douglas Gilbert (1):
scsi_debug: add max_queue + no_uld parameters
FUJITA Tomonori (1):
mpt2sas: fix the incorrect scsi_dma_map error checking
Ferenc Wagner (1):
qla2xxx: Fix documentation of ql2xfdmienable module parameter
Geert Uytterhoeven (10):
a2091: Kill ugly DMA() macro
a3000: Use shost_priv() and kill ugly HDATA() macro
mvme147: Use shost_priv() and kill ugly HDATA() macro
gvp11: Use shost_priv() and kill ugly HDATA() macro
a2091: Use shost_priv() and kill ugly HDATA() macro
a3000: Reindentation
mvme147: Reindentation
gvp11: Reindentation
a2091: Reindentation
wd33c93: Kill empty wd33c93_release()
Giridhar Malavali (4):
qla2xxx: Updates to ISP82xx support.
qla2xxx: Optionally disable target reset.
qla2xxx: Add ISP82XX support.
qla2xxx: Re-organized BSG interface specific code.
Hannes Reinecke (2):
sd: quiet spurious error messages in READ_CAPACITY(16)
scsi_transport_fc: Protect against overflow in dev_loss_tmo
Harish Zunjarrao (2):
qla2xxx: Add char device to increase driver use count
qla2xxx: Free DMA memory only if it is allocated in vendor specific BSG command
James Bottomley (2):
libsas: fix deref before check in commit 70b25f890ce
sd: retry read_capacity on UNIT_ATTENTION
James Smart (13):
lpfc 8.3.12: Update Driver version to 8.3.12
lpfc 8.3.12: Fix discovery issues
lpfc 8.3.12: BSG Fixes and enhancements
lpfc 8.3.12: Critical fixes
lpfc 8.3.12: T10-PI/DIF changes
lpfc 8.3.12: Miscellaneous Changes
lpfc 8.3.12: Emulex SLI enhancements
lpfc 8.3.11: Update Driver version to 8.3.11
lpfc 8.3.11: NPIV changes
lpfc 8.3.11: Fix AER uncorrectable non-fatal error handling
lpfc 8.3.11: Driver management improvements via BSG
lpfc 8.3.11: SLI4 Improvements
lpfc 8.3.11: FCF failover improvements
Jing Huang (6):
bfa: fix compilation warning in powerpc
bfa: sg addr big endian fix
bfa: protect idr using bfad_mutex
bfa: use pci_iomap() and pci_iounmap()
bfa: fix the issue of not handling scsi_cmnd sg chaining case
bfa: add fc transport class based vport create/delete
Joe Eykholt (15):
libfc: set seq_id for incoming sequence
libfc: fix hton24 macro to take expressions as args
libfc: remove unneeded variables in fc_exch_recv_req()
libfc, libfcoe, fcoe: use smp_processor_id() only when preempt disabled
libfc: fix sequence-initiative WARN in fc_seq_start_next
libfcoe: eliminate unused link and last_link fields
fcoe: remove an unused variable in fcoe_recv_frame()
libfc: send point-to-poin FLOGI LS_ACC to assigned D_DID
libfc: recognize incoming FLOGI for point-to-point mode
fcoe: save gateway address when receiving FLOGI request
libfcoe: fix debug message entering non-FIP mode
fcoe: call fcoe_ctlr_els_send even for ELS responses
libfc: fix oops in point-to-point mode
libfc: add definition for task attribute mask
libfc: recode incoming PRLI handling
Julia Lawall (2):
bfa: eliminate useless code
pm8001: drop redundant memset
Kaladhar Musunuru (2):
libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn
libfcoe: Fix incorrect MAC address clearing
Kashyap, Desai (37):
mpt2sas: Bump version 05.100.00.02
mpt2sas: Before removing sas_device search device in list for _scsih_sas_device_remove
mpt2sas: Reworked scmd->result priority for _scsih_qcmd.
mpt2sas: Upgrade version 05.100.00.01
mpt2sas: Check for NULL pointer before free_pages is added.
mpt2sas: Added support for PCIe Advanced Error Recovery.
mpt2sas: Send default descriptor for RAID pass through in mpt2ctl
mpt2sas: sanity added to remove duplicate port from topology
mpt2sas : IOs needs to be pause until handles are refreshed for all device after recovery
mptfusion: Bump version 03.04.15
mptfusion: Proper error handling is added after mpt_config timeout
mptfusion: Event data alignment with 4 byte.
mptfusion: Check for command status is added after completion.
mptfusion: Task abort is not supported for Volumes
mptfusion: sanity check for vdevice pointer is added
mptfusion: Setting period,offset and width for SPI driver
mptfusion: Proper bus_type check is added
mptfusion: mpt_detach is called properly at the time of rmmod
mptfusion: mpt config will do Hard Reset based upon retry counts
mptfusion: Updated SCSI IO IOCTL error handling.
mptfusion: Added new less expensive RESET (Message Unit Reset)
mpt2sas: Bump version 05.100.00.00
mpt2sas: Copyright 2010.
mpt2sas: Default descriptor for RAID Passthru command.
mpt2sas: return -ENOMEM if memory allocation failed.
mpt2sas: removed use of tm_cmds.mutex in IOCTL branch.
mpt2sas: Fix for little endian
mpt2sas: Driver will not treat NEEDS_INIT as failure.
mpt2sas: Early return from function if shost is in recovery.
mpt2sas: Use of get_free_pages for huge memorary allocation.
mpt2sas: Corrected conditional checks for Internal device Reset
mpt2sas: Corrected time stamp
mpt2sas : Do not reset handle before calling _scsih_remove_device in RESCAN task after HBA RESET
mpt2sas : Device removal algorithm in interrupt context only
mpt2sas: Upgrading version to 04.100.01.02
mpt2sas: modified _scsih_sas_device_find_by_handle/sas_address
mpt2sas: RESCAN Barrier work is added in case of HBA reset.
Kei Tokunaga (3):
add scsi trace core functions and put trace points
ftrace: add __print_hex()
mpt: modify mptctl_exit() to call proper deregister functions
Lalit Chandivade (2):
qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive
qla2xxx: Clear error status after uncorrectable non-fatal errors.
Madhuranath Iyengar (2):
qla2xxx: Support for asynchronous TM and Marker IOCBs.
qla2xxx: Provide common framework for BSG and IOCB commands.
Martin K. Petersen (3):
scsi_trace: Enhance SCSI command tracing
Add missing scsi command definitions
scsi_debug: Block Limits VPD page fixes
Mike Christie (1):
scsi_dh_emc: request flag cleanup
Mike Miller (1):
hpsa: remove unneeded defines
Mike Waychison (1):
qla2xxx: Silence bogus warning by gcc for wrap and did.
Rajashekhara, Mahesh (5):
aacraid: add an ifdef'd device delete case instead of taking the device offline
aacraid: prohibit access to array container space
aacraid: add support for handling ATA pass-through commands.
aacraid: expose physical devices for models with newer firmware
aacraid: respond automatically to volumes added by config tool
Ravi Anand (1):
Adding MAINTAINERS for qla4xxx iSCSI driver.
Richard A Lary (1):
mpt2sas: use correct pci_resource_flag for comparison
Robert Love (6):
libfc: Move the port_id into lport
fcoe: move link speed checking into its own routine
libfc: Remove extra pointer check
libfc: Remove unused fc_get_host_port_type
libfcoe: Don't fill MAC desc in FLOGI if FIP negotiated FPMA
libfc: Add debug statements when fc_fcp returns DID_ERROR to scsi-ml
Roel Kluin (2):
pmcraid: redundant check in pmcraid_check_ioctl_buffer()
gdth: fix buffer overflow
Roland Dreier (1):
cxgb3i: Fix error path for module init
Sarang Radke (2):
qla2xxx: Fix to make conditional decision based on port number.
qla2xxx: Add APEX support.
Srinivas (1):
mvsas: fix hot plug handling and IO issues
Tom Rini (1):
Unexport scsi/scsi.h from headers_install
Tomohiro Kusumi (1):
fix sdev_rw_attr macro for scsi device sysfs entries
Vasu Dev (8):
fcoe: fix fcoe module ref counting
fcoe: fix a circular locking issue with rtnl and sysfs mutex
fcoe: fixes wrong error exit in fcoe_create
fcoe, fnic, libfc: increased CDB size to 16 bytes for fcoe.
fcoe: removes unused shost in fcoe_shost_config
libfc: fix fcp pkt recovery in fc_fcp_recv_data
libfc: use offload EM instance again instead jumping to next EM
libfc: fixes unnecessary seq id jump
Vikas Chaudhary (8):
qla4xxx: Update driver version to 5.02.00-k1
qla4xxx: added support for abort task management command
qla4xxx: correct use of cmd->host_scribble
qla4xxx: do not retry login to CHAP auth failed targets
qla4xxx: Updated firmware ready timeout algorithm
qla4xxx: Code Clean up - remove "marker_needed"
qla4xxx: set device state as per Link UP and LINK DOWN
qla4xxx: added IPv6 support.
Yi Zou (1):
libfc: bug in erroring out upon FCP_RSP_LEN_VAL in fc_fcp_resp
And the diffstat:
MAINTAINERS | 23
drivers/message/fusion/mptbase.c | 177 +
drivers/message/fusion/mptbase.h | 5
drivers/message/fusion/mptctl.c | 181 -
drivers/message/fusion/mptfc.c | 22
drivers/message/fusion/mptsas.c | 55
drivers/message/fusion/mptsas.h | 2
drivers/message/fusion/mptscsih.c | 27
drivers/message/fusion/mptspi.c | 10
drivers/s390/scsi/zfcp_aux.c | 7
drivers/s390/scsi/zfcp_def.h | 19
drivers/s390/scsi/zfcp_erp.c | 2
drivers/s390/scsi/zfcp_ext.h | 6
drivers/s390/scsi/zfcp_fc.c | 4
drivers/s390/scsi/zfcp_fsf.c | 246 --
drivers/s390/scsi/zfcp_fsf.h | 11
drivers/s390/scsi/zfcp_qdio.c | 108
drivers/s390/scsi/zfcp_qdio.h | 104
drivers/s390/scsi/zfcp_scsi.c | 23
drivers/scsi/3w-9xxx.c | 24
drivers/scsi/3w-9xxx.h | 9
drivers/scsi/3w-xxxx.c | 23
drivers/scsi/3w-xxxx.h | 8
drivers/scsi/Makefile | 1
drivers/scsi/a2091.c | 309 +-
drivers/scsi/a2091.h | 42
drivers/scsi/a3000.c | 285 +-
drivers/scsi/a3000.h | 46
drivers/scsi/aacraid/aachba.c | 67
drivers/scsi/aacraid/aacraid.h | 4
drivers/scsi/aacraid/commsup.c | 18
drivers/scsi/bfa/bfa_cb_ioim_macros.h | 29
drivers/scsi/bfa/bfa_ioim.c | 22
drivers/scsi/bfa/bfa_os_inc.h | 23
drivers/scsi/bfa/bfad.c | 21
drivers/scsi/bfa/bfad_attr.c | 201 +
drivers/scsi/bfa/bfad_drv.h | 4
drivers/scsi/bfa/bfad_im.c | 67
drivers/scsi/bfa/bfad_im.h | 6
drivers/scsi/bnx2i/bnx2i_hwi.c | 2
drivers/scsi/bnx2i/bnx2i_init.c | 11
drivers/scsi/cxgb3i/cxgb3i_init.c | 4
drivers/scsi/device_handler/scsi_dh_emc.c | 2
drivers/scsi/fcoe/fcoe.c | 194 +
drivers/scsi/fcoe/libfcoe.c | 111
drivers/scsi/fnic/fnic.h | 4
drivers/scsi/fnic/fnic_fcs.c | 2
drivers/scsi/fnic/fnic_main.c | 2
drivers/scsi/gdth.c | 2
drivers/scsi/gvp11.c | 565 ++--
drivers/scsi/gvp11.h | 36
drivers/scsi/hpsa.c | 8
drivers/scsi/hpsa_cmd.h | 15
drivers/scsi/ibmvscsi/ibmvfc.c | 8
drivers/scsi/ibmvscsi/ibmvfc.h | 1
drivers/scsi/iscsi_tcp.c | 6
drivers/scsi/iscsi_tcp.h | 1
drivers/scsi/libfc/fc_disc.c | 8
drivers/scsi/libfc/fc_elsct.c | 2
drivers/scsi/libfc/fc_exch.c | 51
drivers/scsi/libfc/fc_fcp.c | 103
drivers/scsi/libfc/fc_libfc.h | 8
drivers/scsi/libfc/fc_lport.c | 58
drivers/scsi/libfc/fc_npiv.c | 7
drivers/scsi/libfc/fc_rport.c | 195 -
drivers/scsi/libiscsi_tcp.c | 2
drivers/scsi/libsas/sas_ata.c | 5
drivers/scsi/libsas/sas_scsi_host.c | 16
drivers/scsi/lpfc/lpfc.h | 4
drivers/scsi/lpfc/lpfc_attr.c | 20
drivers/scsi/lpfc/lpfc_bsg.c | 498 +++-
drivers/scsi/lpfc/lpfc_bsg.h | 3
drivers/scsi/lpfc/lpfc_crtn.h | 1
drivers/scsi/lpfc/lpfc_disc.h | 1
drivers/scsi/lpfc/lpfc_els.c | 24
drivers/scsi/lpfc/lpfc_hbadisc.c | 79
drivers/scsi/lpfc/lpfc_hw.h | 190 -
drivers/scsi/lpfc/lpfc_hw4.h | 60
drivers/scsi/lpfc/lpfc_init.c | 213 +
drivers/scsi/lpfc/lpfc_mbox.c | 69
drivers/scsi/lpfc/lpfc_nportdisc.c | 99
drivers/scsi/lpfc/lpfc_scsi.c | 149 -
drivers/scsi/lpfc/lpfc_sli.c | 269 +-
drivers/scsi/lpfc/lpfc_sli.h | 4
drivers/scsi/lpfc/lpfc_sli4.h | 5
drivers/scsi/lpfc/lpfc_version.h | 2
drivers/scsi/lpfc/lpfc_vport.c | 4
drivers/scsi/mpt2sas/Kconfig | 2
drivers/scsi/mpt2sas/mpi/mpi2.h | 2
drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 2
drivers/scsi/mpt2sas/mpi/mpi2_history.txt | 2
drivers/scsi/mpt2sas/mpi/mpi2_init.h | 2
drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 2
drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 2
drivers/scsi/mpt2sas/mpt2sas_base.c | 90
drivers/scsi/mpt2sas/mpt2sas_base.h | 36
drivers/scsi/mpt2sas/mpt2sas_config.c | 8
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 46
drivers/scsi/mpt2sas/mpt2sas_ctl.h | 2
drivers/scsi/mpt2sas/mpt2sas_debug.h | 2
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 1055 +++++---
drivers/scsi/mpt2sas/mpt2sas_transport.c | 89
drivers/scsi/mvme147.c | 169 -
drivers/scsi/mvme147.h | 4
drivers/scsi/mvsas/mv_64xx.c | 25
drivers/scsi/mvsas/mv_94xx.c | 10
drivers/scsi/mvsas/mv_init.c | 19
drivers/scsi/mvsas/mv_sas.c | 201 +
drivers/scsi/mvsas/mv_sas.h | 11
drivers/scsi/pm8001/pm8001_hwi.c | 1
drivers/scsi/pm8001/pm8001_sas.c | 4
drivers/scsi/pmcraid.c | 6
drivers/scsi/qla2xxx/Makefile | 3
drivers/scsi/qla2xxx/qla_attr.c | 772 ------
drivers/scsi/qla2xxx/qla_bsg.c | 1212 ++++++++++
drivers/scsi/qla2xxx/qla_bsg.h | 135 +
drivers/scsi/qla2xxx/qla_dbg.c | 61
drivers/scsi/qla2xxx/qla_dbg.h | 10
drivers/scsi/qla2xxx/qla_def.h | 343 +-
drivers/scsi/qla2xxx/qla_fw.h | 106
drivers/scsi/qla2xxx/qla_gbl.h | 126 +
drivers/scsi/qla2xxx/qla_gs.c | 2
drivers/scsi/qla2xxx/qla_init.c | 724 +++++
drivers/scsi/qla2xxx/qla_inline.h | 21
drivers/scsi/qla2xxx/qla_iocb.c | 879 ++++++-
drivers/scsi/qla2xxx/qla_isr.c | 540 ++--
drivers/scsi/qla2xxx/qla_mbx.c | 266 +-
drivers/scsi/qla2xxx/qla_nx.c | 3636 ++++++++++++++++++++++++++++++
drivers/scsi/qla2xxx/qla_nx.h | 889 +++++++
drivers/scsi/qla2xxx/qla_os.c | 543 ++++
drivers/scsi/qla2xxx/qla_sup.c | 149 +
drivers/scsi/qla4xxx/ql4_def.h | 48
drivers/scsi/qla4xxx/ql4_fw.h | 46
drivers/scsi/qla4xxx/ql4_glbl.h | 8
drivers/scsi/qla4xxx/ql4_init.c | 374 ++-
drivers/scsi/qla4xxx/ql4_iocb.c | 2
drivers/scsi/qla4xxx/ql4_isr.c | 23
drivers/scsi/qla4xxx/ql4_mbx.c | 337 ++
drivers/scsi/qla4xxx/ql4_os.c | 135 +
drivers/scsi/qla4xxx/ql4_version.h | 3
drivers/scsi/scsi.c | 6
drivers/scsi/scsi_debug.c | 89
drivers/scsi/scsi_error.c | 19
drivers/scsi/scsi_scan.c | 3
drivers/scsi/scsi_sysfs.c | 7
drivers/scsi/scsi_trace.c | 284 ++
drivers/scsi/scsi_transport_fc.c | 30
drivers/scsi/sd.c | 25
drivers/scsi/wd33c93.c | 6
drivers/scsi/wd33c93.h | 1
include/linux/ftrace_event.h | 3
include/scsi/Kbuild | 1
include/scsi/fc/fc_fcp.h | 1
include/scsi/fc_encode.h | 18
include/scsi/libfc.h | 29
include/scsi/libfcoe.h | 10
include/scsi/scsi.h | 3
include/scsi/scsi_transport_fc.h | 2
include/trace/events/scsi.h | 345 ++
include/trace/ftrace.h | 3
kernel/trace/trace_output.c | 16
161 files changed, 15301 insertions(+), 4149 deletions(-)
James
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
