On 05/11/2010 10:11 PM, Phil Turmel wrote:
Hi Jeff,
On 05/11/2010 05:09 PM, Jeff Garzik wrote:
On 05/11/2010 02:28 PM, Phil Turmel wrote:
On 05/11/2010 01:21 PM, Phil Reynolds wrote:
Quoting "Phil Turmel"<pturmel-kernel@xxxxxxxxxx>:
I have a similar chipset in my office server: 88SE6145. If yours
can run
in AHCI mode, you just need "ahci.marvell_enable=1" on your kernel
command
line, or "options ahci marvell_enable=1" in your modprobe.conf. (I
have
ahci built-in, and no initramfs, so I put the option in my grub.conf.)
Neither works for me unfortunately.
[snip /]
sata_mv is not related to this hardware.
pata_marvell works with 6101/6121/6141/6145 PATA ports.
ahci works with 6101/6121/6141/6145 SATA ports, with marvell_enable=1.
Jeff
I think you might have me (Phil T) confused with the original poster, Phil
Reynolds [1].
No confusion. You suggested blacklisting sata_mv, and I note above that
sata_mv has nothing to do with the hardware in question.
Jeff
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
