https://bugzilla.kernel.org/show_bug.cgi?id=15950 Summary: Hang in dc395x driver Product: SCSI Drivers Version: 2.5 Kernel Version: 2.6.31 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: DC395X AssignedTo: scsi_drivers-dc395x@xxxxxxxxxxxxxxxxxxxx ReportedBy: ltskinol@xxxxxxxxx Regression: Yes Kernel 2.6.31 and at least some earlier kernels. I'm using an old Microtek ScanMaker flatbed scanner connected to a DC395x SCSI card. dc395x 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 dc395x: Used settings: AdapterID=07, Speed=0(20.0MHz), dev_mode=0x57 dc395x: AdaptMode=0x0f, Tags=4(16), DelayReset=1s dc395x: Connectors: ext50 Termination: Auto Low High dc395x: Performing initial SCSI bus reset scsi0 : Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 scsi 0:0:6:0: Scanner Scanner 1.80 PQ: 0 ANSI: 4 CCS scsi 0:0:6:0: Attached scsi generic sg0 type 6 sata_nv 0000:00:05.0: version 3.5 When scanning with xsane, after a few minutes I often get a hang in xsane and if I forcibly kill xsane, the scanner is no longer there. When the xsane hang occurs, I see this: dc395x: reselect: w/o disconnected cmds <06-0> dc395x: disconnect: Unexpected reselection <06-0> I'm not sure when this problem started, but it's somewhere in the 2.6.2x region. I'd be happy to recompile, test and debug if needed. Thanks, Tom -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
