From: Mike Christie <michaelc@xxxxxxxxxxx>
blk_get_request sets the cmd_flags, so we should not and do not
need to set them. If we did set them to a different value then
it can cause a oops in the elevator code.
Signed-off-by: Mike Christie <michaelc@xxxxxxxxxxx>
---
drivers/scsi/device_handler/scsi_dh_emc.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index e8a0bc3..6faf472 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -285,13 +285,11 @@ static struct request *get_req(struct scsi_device *sdev, int cmd,
switch (cmd) {
case MODE_SELECT:
len = sizeof(short_trespass);
- rq->cmd_flags |= REQ_RW;
rq->cmd[1] = 0x10;
rq->cmd[4] = len;
break;
case MODE_SELECT_10:
len = sizeof(long_trespass);
- rq->cmd_flags |= REQ_RW;
rq->cmd[1] = 0x10;
rq->cmd[8] = len;
break;
--
1.6.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
