On Mon, 22 Feb 2010, Alan Stern wrote: > The value can be changed by writing to > /sys/block/sdX/device/max_sectors (where X is the drive letter). Note > that this value is in 512-byte blocks, not in KB. However it is > limited to SCSI_DEFAULT_MAX_SECTORS, which is 1024, corresponding to > 512 MB. If larger transfers are needed then ------^ Typo: this should be 512 KB. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
