From: Venkata Siva Vijayendra Bhamidipati <vbhamidi@xxxxxxxxx>
To enable FIP support in fnic, we have to register with hardware to receive
FIP solication frames on a well-known multicast address.
Before FIP support, the firmware interface allowed multicast address
registrations only for enic devices. This is a minor change in fnic to
allow the firmware interface to now register mcast addresses for fnic too.
Signed-off-by: Brian Uchino <buchino@xxxxxxxxx>
Signed-off-by: Herman Lee <hermlee@xxxxxxxxx>
Signed-off-by: Robert Love <robert.w.love@xxxxxxxxx>
---
drivers/scsi/fnic/fnic_main.c | 2 ++
drivers/scsi/fnic/vnic_devcmd.h | 2 +-
2 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index fe1b103..5bab7e0 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -620,6 +620,8 @@ static int __devinit fnic_probe(struct pci_dev *pdev,
if (fnic->config.flags & VFCF_FIP_CAPABLE) {
shost_printk(KERN_INFO, fnic->lport->host,
"firmware supports FIP\n");
+ /* enable directed and multicast */
+ vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0);
vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS);
vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr);
} else {
diff --git a/drivers/scsi/fnic/vnic_devcmd.h b/drivers/scsi/fnic/vnic_devcmd.h
index d62b906..7c9ccbd 100644
--- a/drivers/scsi/fnic/vnic_devcmd.h
+++ b/drivers/scsi/fnic/vnic_devcmd.h
@@ -94,7 +94,7 @@ enum vnic_devcmd_cmd {
CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
/* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
- CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7),
+ CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7),
/* hang detection notification */
CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
