Hi there! One of my servers contains two scsi enclosures. After hot removing a disk and hot adding another in the same slot the new disk gets assigned a device file but the enclosure (in sysfs) doesn't want to see it. How can I force the enclosure to recognise the hot added disk. Situation in sysfs: # ls -l "/sys/class/enclosure/10:0:24:0/SLOT 010" insgesamt 0 -rw-r--r-- 1 root root 4096 2010-01-15 14:30 active lrwxrwxrwx 1 root root 0 2010-01-15 12:56 device -> ../../../../../../../port-10:0:11/end_device-10:0:11/target10:0:10/10:0:10:0 -rw-r--r-- 1 root root 4096 2010-01-15 14:31 fault -rw-r--r-- 1 root root 4096 2010-01-15 14:40 locate drwxr-xr-x 2 root root 0 2010-01-15 14:01 power -rw-r--r-- 1 root root 4096 2010-01-15 14:01 status -r--r--r-- 1 root root 4096 2010-01-15 14:01 type -rw-r--r-- 1 root root 4096 2010-01-15 14:01 uevent The link «device» is dead after hot removing the device and keeps vanished after hot adding the new device. The hot added device gets assigned a device file and it is reachable. Even # echo 1 > /sys/bus/scsi/devices/10\:0\:24\:0/rescan doesn't change anything. How can I force the link to be updated towards -> ../../../../../../../port-10:0:26/end_device-10:0:26/target10:0:25/10:0:25:0 ??? Is there a detailed description of the sysfs regarding scsi on the web? Thanks Lars -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
