[patch 12/19] NCR5380: bit MR_DMA_MODE set twice in NCR5380_transfer_dma()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Roel Kluin <roel.kluin@xxxxxxxxx>

Besides keeping the line short, the second setting of the MR_DMA_MODE bit
was removed.

Signed-off-by: Roel Kluin <roel.kluin@xxxxxxxxx>
Cc: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/scsi/NCR5380.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -puN drivers/scsi/NCR5380.c~ncr5380-bit-mr_dma_mode-set-twice-in-ncr5380_transfer_dma drivers/scsi/NCR5380.c
--- a/drivers/scsi/NCR5380.c~ncr5380-bit-mr_dma_mode-set-twice-in-ncr5380_transfer_dma
+++ a/drivers/scsi/NCR5380.c
@@ -1857,7 +1857,9 @@ static int NCR5380_transfer_dma(struct S
 #endif
 	/* KLL May need eop and parity in 53c400 */
 	if (hostdata->flags & FLAG_NCR53C400)
-		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR | MR_ENABLE_EOP_INTR | MR_DMA_MODE | MR_MONITOR_BSY);
+		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE |
+				MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR |
+				MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
 	else
 		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE);
 #endif				/* def REAL_DMA */
_
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux