From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx> Date: Mon, 23 Nov 2009 14:57:42 +1100 (EST) > > The mac_esp PIO algorithm no longer works in 2.6.31 and crashes my Centris > 660av. So here's a better one. > > One of the SCSI drives I tested still doesn't like the PIO mode and fails > with "esp: esp0: Reconnect IRQ2 timeout" (the same drive works fine in > PDMA mode). > > This failure happens when esp_reconnect_with_tag() tries to read in two > tag bytes but the chip only provides one (0x20). I don't know what causes > this. I decided not to waste any more time trying to fix it because the > best solution is to rip out the PIO mode altogether and use the DMA > engine. > > Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx> Can you explain why the esp_slave_configure() part of your patch is necessary? > Index: linux-2.6.31/drivers/scsi/esp_scsi.c > =================================================================== > --- linux-2.6.31.orig/drivers/scsi/esp_scsi.c 2009-11-23 12:52:45.000000000 +1100 > +++ linux-2.6.31/drivers/scsi/esp_scsi.c 2009-11-23 12:53:30.000000000 +1100 > @@ -2405,12 +2405,6 @@ static int esp_slave_configure(struct sc > struct esp_target_data *tp = &esp->target[dev->id]; > int goal_tags, queue_depth; > > - if (esp->flags & ESP_FLAG_DISABLE_SYNC) { > - /* Bypass async domain validation */ > - dev->ppr = 0; > - dev->sdtr = 0; > - } > - > goal_tags = 0; > > if (dev->tagged_supported) { > @@ -2433,6 +2427,11 @@ static int esp_slave_configure(struct sc > } > tp->flags |= ESP_TGT_DISCONNECT; > > + if (esp->flags & ESP_FLAG_DISABLE_SYNC) { > + dev->wdtr = spi_support_wide(dev->sdev_target) = 0; > + dev->sdtr = spi_support_sync(dev->sdev_target) = 0; > + } > + > if (!spi_initial_dv(dev->sdev_target)) > spi_dv_device(dev); > That part... Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html