>>>>> "Mark" == Mark Lord <kernel@xxxxxxxxxxxx> writes:
Mark> Is that correct, or should it be this:
Mark> if (ata_id_has_trim(id) && (id[ATA_ID_ADDITIONAL_SUPP] &
Mark> 0x4020) == 0x4020)
Good spotting! You are right, I need both bits to be set...
libata: Report zeroed read after Trim and max discard size
Our current Trim payload is a single sector that can accommodate 64 *
65535 blocks being unmapped. Report this value in the Block Limits
Maximum Unmap LBA count field.
If a storage device supports Trim and the DRAT and RZAT bits are set,
report TPRZ=1 in Read Capacity(16).
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e0995c4..08d4ab7 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2116,8 +2116,10 @@ static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf)
* that we support some form of unmap - in thise case via WRITE SAME
* with the unmap bit set.
*/
- if (ata_id_has_trim(args->id))
+ if (ata_id_has_trim(args->id)) {
+ put_unaligned_be32(65535 * 512 / 8, &rbuf[20]);
put_unaligned_be32(1, &rbuf[28]);
+ }
return 0;
}
@@ -2412,8 +2414,12 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
rbuf[14] = (lowest_aligned >> 8) & 0x3f;
rbuf[15] = lowest_aligned;
- if (ata_id_has_trim(args->id))
- rbuf[14] |= 0x80;
+ if (ata_id_has_trim(args->id)) {
+ rbuf[14] |= 0x80; /* TPE */
+
+ if (ata_id_has_zero_after_trim(args->id))
+ rbuf[14] |= 0x40; /* TPRZ */
+ }
}
return 0;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index e2595e8..dfa2298 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -75,6 +75,7 @@ enum {
ATA_ID_EIDE_DMA_TIME = 66,
ATA_ID_EIDE_PIO = 67,
ATA_ID_EIDE_PIO_IORDY = 68,
+ ATA_ID_ADDITIONAL_SUPP = 69,
ATA_ID_QUEUE_DEPTH = 75,
ATA_ID_MAJOR_VER = 80,
ATA_ID_COMMAND_SET_1 = 82,
@@ -816,6 +817,16 @@ static inline int ata_id_has_trim(const u16 *id)
return 0;
}
+static inline int ata_id_has_zero_after_trim(const u16 *id)
+{
+ /* DSM supported, deterministic read, and read zero after trim set */
+ if (ata_id_has_trim(id) &&
+ (id[ATA_ID_ADDITIONAL_SUPP] & 0x4020) == 0x4020)
+ return 1;
+
+ return 0;
+}
+
static inline int ata_id_current_chs_valid(const u16 *id)
{
/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
