Martin K. Petersen wrote:
> A few updates to the thin provisioning bits aimed at 2.6.33:
>
> - Block layer support for reporting whether reading previously
> discarded blocks returns zeroes or not. Jens, this applies on
> top of the patch that you have already queued.
>
> - Updated SCSI disk thin provisioning support:
>
> - Reports TPRZ via the new block layer flag
>
> - Moved some of the discard detection to read_capacity_16 to
> accommodate TP devices that don't support Unmap and the
> block limits VPD
>
> James, this replaces my existing post-merge sd patch.
>
> - libata:
>
> - Translate DRAT and ZRAT to TPRZ (zeroed blocks after trim)
>
> - Report the maximum discard sectors in the block limits VPD
>
> - Fix a couple of problems in ata_set_lba_range_entries() that
> caused us to issue garbled trims
>
>
> Interested parties can grab the tp branch from:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/mkp/linux-2.6-mkp.git
I pulled that tonight ...
Doing a test on an OCZ ssd, by patterning 16GB and then discarding
it via a single ioctl call, ends in an unhappy drive:
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd 06/01:00:00:00:00/00:02:00:00:00/a0 tag 0 dma 4294966784 out
res 40/00:18:18:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link down (SStatus 0 SControl 300)
ata3: hard resetting link
ata3: SATA link down (SStatus 0 SControl 300)
ata3: limiting SATA link speed to 1.5 Gbps
ata3: hard resetting link
ata3: SATA link down (SStatus 0 SControl 310)
ata3.00: disabled
ata3: EH complete
ata3.00: detaching (SCSI 2:0:0:0)
sd 2:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sdb] START_STOP FAILED
sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
... and then it goes away ...
-Eric
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
