Hardware related Fixes and Changes.
- Added new Adapter IDs and update default Adapter names.
- Added PCI read after EQarm doorbell PCI write to flush the write
and avoid spurrious interrupts when in INTx mode.
- Phase out use of ONLINE registers.
- Fix for lost MSI interrupt
Signed-off-by: James Smart <james.smart@xxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_hw.h | 3 +-
drivers/scsi/lpfc/lpfc_hw4.h | 4 +-
drivers/scsi/lpfc/lpfc_init.c | 170 ++++++++++++++++++++++------------------
drivers/scsi/lpfc/lpfc_sli.c | 55 ++++++++-----
drivers/scsi/lpfc/lpfc_sli4.h | 7 +-
5 files changed, 134 insertions(+), 105 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index f279d19..c9faa1d 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1168,7 +1168,8 @@ typedef struct {
#define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12
#define PCI_VENDOR_ID_SERVERENGINE 0x19a2
#define PCI_DEVICE_ID_TIGERSHARK 0x0704
-#define PCI_DEVICE_ID_TS_BE3 0x0714
+#define PCI_DEVICE_ID_TOMCAT 0x0714
+#define PCI_DEVICE_ID_FALCON 0xf180
#define JEDEC_ID_ADDRESS 0x0080001c
#define FIREFLY_JEDEC_ID 0x1ACC
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index fa33063..1585148 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -514,8 +514,8 @@ struct lpfc_register {
#define LPFC_UERR_STATUS_HI 0x00A4
#define LPFC_UERR_STATUS_LO 0x00A0
-#define LPFC_ONLINE0 0x00B0
-#define LPFC_ONLINE1 0x00B4
+#define LPFC_UE_MASK_HI 0x00AC
+#define LPFC_UE_MASK_LO 0x00A8
#define LPFC_SCRATCHPAD 0x0058
/* BAR0 Registers */
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 954594b..bb9cea9 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1529,10 +1529,10 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
int GE = 0;
int oneConnect = 0; /* default is not a oneConnect */
struct {
- char * name;
- int max_speed;
- char * bus;
- } m = {"<Unknown>", 0, ""};
+ char *name;
+ char *bus;
+ char *function;
+ } m = {"<Unknown>", "", ""};
if (mdp && mdp[0] != '\0'
&& descp && descp[0] != '\0')
@@ -1553,136 +1553,155 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
switch (dev_id) {
case PCI_DEVICE_ID_FIREFLY:
- m = (typeof(m)){"LP6000", max_speed, "PCI"};
+ m = (typeof(m)){"LP6000", "PCI", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SUPERFLY:
if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
- m = (typeof(m)){"LP7000", max_speed, "PCI"};
+ m = (typeof(m)){"LP7000", "PCI",
+ "Fibre Channel Adapter"};
else
- m = (typeof(m)){"LP7000E", max_speed, "PCI"};
+ m = (typeof(m)){"LP7000E", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_DRAGONFLY:
- m = (typeof(m)){"LP8000", max_speed, "PCI"};
+ m = (typeof(m)){"LP8000", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_CENTAUR:
if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
- m = (typeof(m)){"LP9002", max_speed, "PCI"};
+ m = (typeof(m)){"LP9002", "PCI",
+ "Fibre Channel Adapter"};
else
- m = (typeof(m)){"LP9000", max_speed, "PCI"};
+ m = (typeof(m)){"LP9000", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_RFLY:
- m = (typeof(m)){"LP952", max_speed, "PCI"};
+ m = (typeof(m)){"LP952", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PEGASUS:
- m = (typeof(m)){"LP9802", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP9802", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_THOR:
- m = (typeof(m)){"LP10000", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP10000", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_VIPER:
- m = (typeof(m)){"LPX1000", max_speed, "PCI-X"};
+ m = (typeof(m)){"LPX1000", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PFLY:
- m = (typeof(m)){"LP982", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP982", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_TFLY:
- m = (typeof(m)){"LP1050", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP1050", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS:
- m = (typeof(m)){"LP11000", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP11000", "PCI-X2",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS_SCSP:
- m = (typeof(m)){"LP11000-SP", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP11000-SP", "PCI-X2",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS_DCSP:
- m = (typeof(m)){"LP11002-SP", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP11002-SP", "PCI-X2",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE:
- m = (typeof(m)){"LPe1000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE_SCSP:
- m = (typeof(m)){"LPe1000-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1000-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE_DCSP:
- m = (typeof(m)){"LPe1002-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1002-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_BMID:
- m = (typeof(m)){"LP1150", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP1150", "PCI-X2", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_BSMB:
- m = (typeof(m)){"LP111", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP111", "PCI-X2", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZEPHYR:
- m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZEPHYR_SCSP:
- m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZEPHYR_DCSP:
- m = (typeof(m)){"LP2105", max_speed, "PCIe"};
+ m = (typeof(m)){"LP2105", "PCIe", "FCoE Adapter"};
GE = 1;
break;
case PCI_DEVICE_ID_ZMID:
- m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1150", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZSMB:
- m = (typeof(m)){"LPe111", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe111", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP101:
- m = (typeof(m)){"LP101", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP101", "PCI-X", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP10000S:
- m = (typeof(m)){"LP10000-S", max_speed, "PCI"};
+ m = (typeof(m)){"LP10000-S", "PCI", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP11000S:
- m = (typeof(m)){"LP11000-S", max_speed,
- "PCI-X2"};
+ m = (typeof(m)){"LP11000-S", "PCI-X2", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LPE11000S:
- m = (typeof(m)){"LPe11000-S", max_speed,
- "PCIe"};
+ m = (typeof(m)){"LPe11000-S", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT:
- m = (typeof(m)){"LPe12000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_MID:
- m = (typeof(m)){"LPe1250", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1250", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_SMB:
- m = (typeof(m)){"LPe121", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe121", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_DCSP:
- m = (typeof(m)){"LPe12002-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12002-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_SCSP:
- m = (typeof(m)){"LPe12000-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12000-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_S:
- m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12000-S", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HORNET:
- m = (typeof(m)){"LP21000", max_speed, "PCIe"};
+ m = (typeof(m)){"LP21000", "PCIe", "FCoE Adapter"};
GE = 1;
break;
case PCI_DEVICE_ID_PROTEUS_VF:
- m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
+ m = (typeof(m)){"LPev12000", "PCIe IOV",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PROTEUS_PF:
- m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
+ m = (typeof(m)){"LPev12000", "PCIe IOV",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PROTEUS_S:
- m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
+ m = (typeof(m)){"LPemv12002-S", "PCIe IOV",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_TIGERSHARK:
oneConnect = 1;
- m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
+ m = (typeof(m)){"OCe10100", "PCIe", "FCoE"};
break;
- case PCI_DEVICE_ID_TS_BE3:
+ case PCI_DEVICE_ID_TOMCAT:
oneConnect = 1;
- m = (typeof(m)) {"OCeXXXXX-F", max_speed, "PCIe"};
+ m = (typeof(m)){"OCe11100", "PCIe", "FCoE"};
+ break;
+ case PCI_DEVICE_ID_FALCON:
+ m = (typeof(m)){"LPSe12002-ML1-E", "PCIe",
+ "EmulexSecure Fibre"};
break;
default:
- m = (typeof(m)){ NULL };
+ m = (typeof(m)){"Unknown", "", ""};
break;
}
@@ -1694,17 +1713,14 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
if (descp && descp[0] == '\0') {
if (oneConnect)
snprintf(descp, 255,
- "Emulex OneConnect %s, FCoE Initiator, Port %s",
- m.name,
+ "Emulex OneConnect %s, %s Initiator, Port %s",
+ m.name, m.function,
phba->Port);
else
snprintf(descp, 255,
"Emulex %s %d%s %s %s",
- m.name, m.max_speed,
- (GE) ? "GE" : "Gb",
- m.bus,
- (GE) ? "FCoE Adapter" :
- "Fibre Channel Adapter");
+ m.name, max_speed, (GE) ? "GE" : "Gb",
+ m.bus, m.function);
}
}
@@ -4618,7 +4634,6 @@ int
lpfc_sli4_post_status_check(struct lpfc_hba *phba)
{
struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
- uint32_t onlnreg0, onlnreg1;
int i, port_error = -ENODEV;
if (!phba->sli4_hba.STAregaddr)
@@ -4662,21 +4677,20 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
bf_get(lpfc_scratchpad_slirev, &scratchpad),
bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
-
+ phba->sli4_hba.ue_mask_lo = readl(phba->sli4_hba.UEMASKLOregaddr);
+ phba->sli4_hba.ue_mask_hi = readl(phba->sli4_hba.UEMASKHIregaddr);
/* With uncoverable error, log the error message and return error */
- onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
- onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
- if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
- uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
- uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
- if (uerrlo_reg.word0 || uerrhi_reg.word0) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1422 HBA Unrecoverable error: "
- "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
- "online0_reg=0x%x, online1_reg=0x%x\n",
- uerrlo_reg.word0, uerrhi_reg.word0,
- onlnreg0, onlnreg1);
- }
+ uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
+ uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
+ if ((~phba->sli4_hba.ue_mask_lo & uerrlo_reg.word0) ||
+ (~phba->sli4_hba.ue_mask_hi & uerrhi_reg.word0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1422 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "ue_mask_lo_reg=0x%x, ue_mask_hi_reg=0x%x\n",
+ uerrlo_reg.word0, uerrhi_reg.word0,
+ phba->sli4_hba.ue_mask_lo,
+ phba->sli4_hba.ue_mask_hi);
return -ENODEV;
}
@@ -4697,10 +4711,10 @@ lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
LPFC_UERR_STATUS_LO;
phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_UERR_STATUS_HI;
- phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
- LPFC_ONLINE0;
- phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
- LPFC_ONLINE1;
+ phba->sli4_hba.UEMASKLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UE_MASK_LO;
+ phba->sli4_hba.UEMASKHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UE_MASK_HI;
phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_SCRATCHPAD;
}
@@ -7249,7 +7263,7 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
return PCI_ERS_RESULT_DISCONNECT;
default:
/* Unknown state, prepare and request slot reset */
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0472 Unknown PCI error state: x%x\n", state);
lpfc_sli_prep_dev_for_reset(phba);
return PCI_ERS_RESULT_NEED_RESET;
@@ -8116,7 +8130,9 @@ static struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TS_BE3,
+ {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TOMCAT,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FALCON,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 1d2f65c..b3a69f9 100755
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -263,6 +263,9 @@ lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ /* PCI read to flush PCI pipeline on re-arming for INTx mode */
+ if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
+ readl(q->phba->sli4_hba.EQCQDBregaddr);
return released;
}
@@ -7686,31 +7689,28 @@ static int
lpfc_sli4_eratt_read(struct lpfc_hba *phba)
{
uint32_t uerr_sta_hi, uerr_sta_lo;
- uint32_t onlnreg0, onlnreg1;
/* For now, use the SLI4 device internal unrecoverable error
* registers for error attention. This can be changed later.
*/
- onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
- onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
- if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
- uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
- uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
- if (uerr_sta_lo || uerr_sta_hi) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1423 HBA Unrecoverable error: "
- "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
- "online0_reg=0x%x, online1_reg=0x%x\n",
- uerr_sta_lo, uerr_sta_hi,
- onlnreg0, onlnreg1);
- phba->work_status[0] = uerr_sta_lo;
- phba->work_status[1] = uerr_sta_hi;
- /* Set the driver HA work bitmap */
- phba->work_ha |= HA_ERATT;
- /* Indicate polling handles this ERATT */
- phba->hba_flag |= HBA_ERATT_HANDLED;
- return 1;
- }
+ uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
+ uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
+ if ((~phba->sli4_hba.ue_mask_lo & uerr_sta_lo) ||
+ (~phba->sli4_hba.ue_mask_hi & uerr_sta_hi)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1423 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "ue_mask_lo_reg=0x%x, ue_mask_hi_reg=0x%x\n",
+ uerr_sta_lo, uerr_sta_hi,
+ phba->sli4_hba.ue_mask_lo,
+ phba->sli4_hba.ue_mask_hi);
+ phba->work_status[0] = uerr_sta_lo;
+ phba->work_status[1] = uerr_sta_hi;
+ /* Set the driver HA work bitmap */
+ phba->work_ha |= HA_ERATT;
+ /* Indicate polling handles this ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
+ return 1;
}
return 0;
}
@@ -7833,7 +7833,7 @@ irqreturn_t
lpfc_sli_sp_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
- uint32_t ha_copy;
+ uint32_t ha_copy, hc_copy;
uint32_t work_ha_copy;
unsigned long status;
unsigned long iflag;
@@ -7891,8 +7891,13 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id)
}
/* Clear up only attention source related to slow-path */
+ hc_copy = readl(phba->HCregaddr);
+ writel(hc_copy & ~(HC_MBINT_ENA | HC_R2INT_ENA |
+ HC_LAINT_ENA | HC_ERINT_ENA),
+ phba->HCregaddr);
writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)),
phba->HAregaddr);
+ writel(hc_copy, phba->HCregaddr);
readl(phba->HAregaddr); /* flush */
spin_unlock_irqrestore(&phba->hbalock, iflag);
} else
@@ -8202,6 +8207,7 @@ lpfc_sli_intr_handler(int irq, void *dev_id)
struct lpfc_hba *phba;
irqreturn_t sp_irq_rc, fp_irq_rc;
unsigned long status1, status2;
+ uint32_t hc_copy;
/*
* Get the driver's phba structure from the dev_id and
@@ -8239,7 +8245,12 @@ lpfc_sli_intr_handler(int irq, void *dev_id)
}
/* Clear attention sources except link and error attentions */
+ hc_copy = readl(phba->HCregaddr);
+ writel(hc_copy & ~(HC_MBINT_ENA | HC_R0INT_ENA | HC_R1INT_ENA
+ | HC_R2INT_ENA | HC_LAINT_ENA | HC_ERINT_ENA),
+ phba->HCregaddr);
writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
+ writel(hc_copy, phba->HCregaddr);
readl(phba->HAregaddr); /* flush */
spin_unlock(&phba->hbalock);
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 6a4558b..25d66d0 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -293,9 +293,8 @@ struct lpfc_sli4_hba {
/* BAR0 PCI config space register memory map */
void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
- void __iomem *ONLINE0regaddr; /* Address to components of internal UE */
- void __iomem *ONLINE1regaddr; /* Address to components of internal UE */
-#define LPFC_ONLINE_NERR 0xFFFFFFFF
+ void __iomem *UEMASKLOregaddr; /* Address to UE_MASK_LO register */
+ void __iomem *UEMASKHIregaddr; /* Address to UE_MASK_HI register */
void __iomem *SCRATCHPADregaddr; /* Address to scratchpad register */
/* BAR1 FCoE function CSR register memory map */
void __iomem *STAregaddr; /* Address to HST_STATE register */
@@ -309,6 +308,8 @@ struct lpfc_sli4_hba {
void __iomem *MQDBregaddr; /* Address to MQ_DOORBELL register */
void __iomem *BMBXregaddr; /* Address to BootStrap MBX register */
+ uint32_t ue_mask_lo;
+ uint32_t ue_mask_hi;
struct msix_entry *msix_entries;
uint32_t cfg_eqn;
struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
--
1.6.0.6
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
