Change Scsi_Cmnd for struct scsi_cmnd.
Signed-off-by: Davidlohr Bueso <dave@xxxxxxx>
---
drivers/scsi/in2000.c | 68 ++++++++++++++++++++++++------------------------
drivers/scsi/in2000.h | 14 +++++-----
2 files changed, 41 insertions(+), 41 deletions(-)
diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c
index 52bdc6d..6bd5a00 100644
--- a/drivers/scsi/in2000.c
+++ b/drivers/scsi/in2000.c
@@ -255,7 +255,7 @@ static unsigned long read_3393_count(struct IN2000_hostdata *hostdata)
* will be a DATA_OUT phase with this command, false otherwise.
* (Thanks to Joerg Dorchain for the research and suggestion.)
*/
-static int is_dir_out(Scsi_Cmnd * cmd)
+static int is_dir_out(struct scsi_cmnd * cmd)
{
switch (cmd->cmnd[0]) {
case WRITE_6:
@@ -334,18 +334,18 @@ static uchar calc_sync_xfer(unsigned int period, unsigned int offset)
static void in2000_execute(struct Scsi_Host *instance);
-static int in2000_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int in2000_queuecommand(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
{
struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
- Scsi_Cmnd *tmp;
+ struct scsi_cmnd *tmp;
instance = cmd->device->host;
hostdata = (struct IN2000_hostdata *) instance->hostdata;
DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x-%ld(", cmd->cmnd[0], cmd->serial_number))
-/* Set up a few fields in the Scsi_Cmnd structure for our own use:
+/* Set up a few fields in the struct scsi_cmnd structure for our own use:
* - host_scribble is the pointer to the next cmd in the input queue
* - scsi_done points to the routine we call when a cmd is finished
* - result is what you'd expect
@@ -417,7 +417,7 @@ static int in2000_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
cmd->host_scribble = (uchar *) hostdata->input_Q;
hostdata->input_Q = cmd;
} else { /* find the end of the queue */
- for (tmp = (Scsi_Cmnd *) hostdata->input_Q; tmp->host_scribble; tmp = (Scsi_Cmnd *) tmp->host_scribble);
+ for (tmp = (struct scsi_cmnd *) hostdata->input_Q; tmp->host_scribble; tmp = (struct scsi_cmnd *) tmp->host_scribble);
tmp->host_scribble = (uchar *) cmd;
}
@@ -444,7 +444,7 @@ static int in2000_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
static void in2000_execute(struct Scsi_Host *instance)
{
struct IN2000_hostdata *hostdata;
- Scsi_Cmnd *cmd, *prev;
+ struct scsi_cmnd *cmd, *prev;
int i;
unsigned short *sp;
unsigned short f;
@@ -467,13 +467,13 @@ static void in2000_execute(struct Scsi_Host *instance)
* for an idle target/lun.
*/
- cmd = (Scsi_Cmnd *) hostdata->input_Q;
+ cmd = (struct scsi_cmnd *) hostdata->input_Q;
prev = NULL;
while (cmd) {
if (!(hostdata->busy[cmd->device->id] & (1 << cmd->device->lun)))
break;
prev = cmd;
- cmd = (Scsi_Cmnd *) cmd->host_scribble;
+ cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
/* quit if queue empty or all possible targets are busy */
@@ -490,7 +490,7 @@ static void in2000_execute(struct Scsi_Host *instance)
if (prev)
prev->host_scribble = cmd->host_scribble;
else
- hostdata->input_Q = (Scsi_Cmnd *) cmd->host_scribble;
+ hostdata->input_Q = (struct scsi_cmnd *) cmd->host_scribble;
#ifdef PROC_STATISTICS
hostdata->cmd_cnt[cmd->device->id]++;
@@ -539,9 +539,9 @@ static void in2000_execute(struct Scsi_Host *instance)
goto yes;
if (!(hostdata->input_Q)) /* input_Q empty? */
goto no;
- for (prev = (Scsi_Cmnd *) hostdata->input_Q; prev; prev = (Scsi_Cmnd *) prev->host_scribble) {
+ for (prev = (struct scsi_cmnd *) hostdata->input_Q; prev; prev = (struct scsi_cmnd *) prev->host_scribble) {
if ((prev->device->id != cmd->device->id) || (prev->device->lun != cmd->device->lun)) {
- for (prev = (Scsi_Cmnd *) hostdata->input_Q; prev; prev = (Scsi_Cmnd *) prev->host_scribble)
+ for (prev = (struct scsi_cmnd *) hostdata->input_Q; prev; prev = (struct scsi_cmnd *) prev->host_scribble)
prev->SCp.phase = 1;
goto yes;
}
@@ -743,7 +743,7 @@ static void transfer_pio(uchar * buf, int cnt, int data_in_dir, struct IN2000_ho
-static void transfer_bytes(Scsi_Cmnd * cmd, int data_in_dir)
+static void transfer_bytes(struct scsi_cmnd * cmd, int data_in_dir)
{
struct IN2000_hostdata *hostdata;
unsigned short *sp;
@@ -833,7 +833,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
{
struct Scsi_Host *instance = dev_id;
struct IN2000_hostdata *hostdata;
- Scsi_Cmnd *patch, *cmd;
+ struct scsi_cmnd *patch, *cmd;
uchar asr, sr, phs, id, lun, *ucp, msg;
int i, j;
unsigned long length;
@@ -909,7 +909,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
* (Big thanks to Bill Earnest for getting me out of the mud in here.)
*/
- cmd = (Scsi_Cmnd *) hostdata->connected; /* assume we're connected */
+ cmd = (struct scsi_cmnd *) hostdata->connected; /* assume we're connected */
CHECK_NULL(cmd, "fifo_int")
if (hostdata->fifo == FI_FIFO_READING) {
@@ -991,7 +991,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
* detailed info from FIFO_READING and FIFO_WRITING (see below).
*/
- cmd = (Scsi_Cmnd *) hostdata->connected; /* assume we're connected */
+ cmd = (struct scsi_cmnd *) hostdata->connected; /* assume we're connected */
sr = read_3393(hostdata, WD_SCSI_STATUS); /* clear the interrupt */
phs = read_3393(hostdata, WD_COMMAND_PHASE);
@@ -1068,7 +1068,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
if (hostdata->state == S_RUNNING_LEVEL2)
hostdata->connected = NULL;
else {
- cmd = (Scsi_Cmnd *) hostdata->selecting; /* get a valid cmd */
+ cmd = (struct scsi_cmnd *) hostdata->selecting; /* get a valid cmd */
CHECK_NULL(cmd, "csr_timeout")
hostdata->selecting = NULL;
}
@@ -1090,7 +1090,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
case CSR_SELECT:
DB(DB_INTR, printk("SELECT"))
- hostdata->connected = cmd = (Scsi_Cmnd *) hostdata->selecting;
+ hostdata->connected = cmd = (struct scsi_cmnd *) hostdata->selecting;
CHECK_NULL(cmd, "csr_select")
hostdata->selecting = NULL;
@@ -1491,7 +1491,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
if (hostdata->level2 <= L2_NONE) {
if (hostdata->selecting) {
- cmd = (Scsi_Cmnd *) hostdata->selecting;
+ cmd = (struct scsi_cmnd *) hostdata->selecting;
hostdata->selecting = NULL;
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
cmd->host_scribble = (uchar *) hostdata->input_Q;
@@ -1532,13 +1532,13 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
/* Now we look for the command that's reconnecting. */
- cmd = (Scsi_Cmnd *) hostdata->disconnected_Q;
+ cmd = (struct scsi_cmnd *) hostdata->disconnected_Q;
patch = NULL;
while (cmd) {
if (id == cmd->device->id && lun == cmd->device->lun)
break;
patch = cmd;
- cmd = (Scsi_Cmnd *) cmd->host_scribble;
+ cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
/* Hmm. Couldn't find a valid command.... What to do? */
@@ -1553,7 +1553,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
if (patch)
patch->host_scribble = cmd->host_scribble;
else
- hostdata->disconnected_Q = (Scsi_Cmnd *) cmd->host_scribble;
+ hostdata->disconnected_Q = (struct scsi_cmnd *) cmd->host_scribble;
hostdata->connected = cmd;
/* We don't need to worry about 'initialize_SCp()' or 'hostdata->busy[]'
@@ -1639,7 +1639,7 @@ static int reset_hardware(struct Scsi_Host *instance, int type)
-static int in2000_bus_reset(Scsi_Cmnd * cmd)
+static int in2000_bus_reset(struct scsi_cmnd * cmd)
{
struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
@@ -1675,11 +1675,11 @@ static int in2000_bus_reset(Scsi_Cmnd * cmd)
return SUCCESS;
}
-static int __in2000_abort(Scsi_Cmnd * cmd)
+static int __in2000_abort(struct scsi_cmnd * cmd)
{
struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
- Scsi_Cmnd *tmp, *prev;
+ struct scsi_cmnd *tmp, *prev;
uchar sr, asr;
unsigned long timeout;
@@ -1694,7 +1694,7 @@ static int __in2000_abort(Scsi_Cmnd * cmd)
* from the inout_Q.
*/
- tmp = (Scsi_Cmnd *) hostdata->input_Q;
+ tmp = (struct scsi_cmnd *) hostdata->input_Q;
prev = NULL;
while (tmp) {
if (tmp == cmd) {
@@ -1707,7 +1707,7 @@ static int __in2000_abort(Scsi_Cmnd * cmd)
return SUCCESS;
}
prev = tmp;
- tmp = (Scsi_Cmnd *) tmp->host_scribble;
+ tmp = (struct scsi_cmnd *) tmp->host_scribble;
}
/*
@@ -1774,7 +1774,7 @@ static int __in2000_abort(Scsi_Cmnd * cmd)
* an ABORT_SNOOZE and hope for the best...
*/
- for (tmp = (Scsi_Cmnd *) hostdata->disconnected_Q; tmp; tmp = (Scsi_Cmnd *) tmp->host_scribble)
+ for (tmp = (struct scsi_cmnd *) hostdata->disconnected_Q; tmp; tmp = (struct scsi_cmnd *) tmp->host_scribble)
if (cmd == tmp) {
printk(KERN_DEBUG "scsi%d: unable to abort disconnected command.\n", instance->host_no);
return FAILED;
@@ -1796,7 +1796,7 @@ static int __in2000_abort(Scsi_Cmnd * cmd)
return SUCCESS;
}
-static int in2000_abort(Scsi_Cmnd * cmd)
+static int in2000_abort(struct scsi_cmnd * cmd)
{
int rc;
@@ -2175,7 +2175,7 @@ static int in2000_proc_info(struct Scsi_Host *instance, char *buf, char **start,
char tbuf[128];
unsigned long flags;
struct IN2000_hostdata *hd;
- Scsi_Cmnd *cmd;
+ struct scsi_cmnd *cmd;
int x, i;
static int stop = 0;
@@ -2267,27 +2267,27 @@ static int in2000_proc_info(struct Scsi_Host *instance, char *buf, char **start,
if (hd->proc & PR_CONNECTED) {
strcat(bp, "\nconnected: ");
if (hd->connected) {
- cmd = (Scsi_Cmnd *) hd->connected;
+ cmd = (struct scsi_cmnd *) hd->connected;
sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
}
}
if (hd->proc & PR_INPUTQ) {
strcat(bp, "\ninput_Q: ");
- cmd = (Scsi_Cmnd *) hd->input_Q;
+ cmd = (struct scsi_cmnd *) hd->input_Q;
while (cmd) {
sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
- cmd = (Scsi_Cmnd *) cmd->host_scribble;
+ cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
}
if (hd->proc & PR_DISCQ) {
strcat(bp, "\ndisconnected_Q:");
- cmd = (Scsi_Cmnd *) hd->disconnected_Q;
+ cmd = (struct scsi_cmnd *) hd->disconnected_Q;
while (cmd) {
sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
- cmd = (Scsi_Cmnd *) cmd->host_scribble;
+ cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
}
if (hd->proc & PR_TEST) {
diff --git a/drivers/scsi/in2000.h b/drivers/scsi/in2000.h
index 0fb8b06..2f3085f 100644
--- a/drivers/scsi/in2000.h
+++ b/drivers/scsi/in2000.h
@@ -283,10 +283,10 @@ struct IN2000_hostdata {
unsigned int dip_switch; /* dip switch settings */
unsigned int hrev; /* hardware revision of card */
volatile uchar busy[8]; /* index = target, bit = lun */
- volatile Scsi_Cmnd *input_Q; /* commands waiting to be started */
- volatile Scsi_Cmnd *selecting; /* trying to select this command */
- volatile Scsi_Cmnd *connected; /* currently connected command */
- volatile Scsi_Cmnd *disconnected_Q;/* commands waiting for reconnect */
+ volatile struct scsi_cmnd *input_Q; /* commands waiting to be started */
+ volatile struct scsi_cmnd *selecting; /* trying to select this command */
+ volatile struct scsi_cmnd *connected; /* currently connected command */
+ volatile struct scsi_cmnd *disconnected_Q;/* commands waiting for reconnect */
uchar state; /* what we are currently doing */
uchar fifo; /* what the FIFO is up to */
uchar level2; /* extent to which Level-2 commands are used */
@@ -396,12 +396,12 @@ struct IN2000_hostdata {
flags)
static int in2000_detect(struct scsi_host_template *) in2000__INIT;
-static int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-static int in2000_abort(Scsi_Cmnd *);
+static int in2000_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+static int in2000_abort(struct scsi_cmnd *);
static void in2000_setup(char *, int *) in2000__INIT;
static int in2000_biosparam(struct scsi_device *, struct block_device *,
sector_t, int *);
-static int in2000_bus_reset(Scsi_Cmnd *);
+static int in2000_bus_reset(struct scsi_cmnd *);
#define IN2000_CAN_Q 16
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
