From: Chris Leech <christopher.leech@xxxxxxxxx>
Right now it's exactly the same as the physical port template,
and there is no way to create a port on anything other than the
netdev. When the vport_create entry point gets hooked up it will
create lports on top of vport devices, which will use this.
Rename scsi_transport_fcoe_sw to fcoe_transport_template to be more
clear with naming now that there are two templates.
Signed-off-by: Chris Leech <christopher.leech@xxxxxxxxx>
Signed-off-by: Robert Love <robert.w.love@xxxxxxxxx>
---
drivers/scsi/fcoe/fcoe.c | 54 ++++++++++++++++++++++++++++++++++++++++------
1 files changed, 47 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index a64c398..d37d573 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -90,7 +90,8 @@ static struct notifier_block fcoe_notifier = {
.notifier_call = fcoe_device_notification,
};
-static struct scsi_transport_template *scsi_transport_fcoe_sw;
+static struct scsi_transport_template *fcoe_transport_template;
+static struct scsi_transport_template *fcoe_vport_transport_template;
struct fc_function_template fcoe_transport_function = {
.show_host_node_name = 1,
@@ -125,6 +126,39 @@ struct fc_function_template fcoe_transport_function = {
.terminate_rport_io = fc_rport_terminate_io,
};
+struct fc_function_template fcoe_vport_transport_function = {
+ .show_host_node_name = 1,
+ .show_host_port_name = 1,
+ .show_host_supported_classes = 1,
+ .show_host_supported_fc4s = 1,
+ .show_host_active_fc4s = 1,
+ .show_host_maxframe_size = 1,
+
+ .show_host_port_id = 1,
+ .show_host_supported_speeds = 1,
+ .get_host_speed = fc_get_host_speed,
+ .show_host_speed = 1,
+ .show_host_port_type = 1,
+ .get_host_port_state = fc_get_host_port_state,
+ .show_host_port_state = 1,
+ .show_host_symbolic_name = 1,
+
+ .dd_fcrport_size = sizeof(struct fc_rport_libfc_priv),
+ .show_rport_maxframe_size = 1,
+ .show_rport_supported_classes = 1,
+
+ .show_host_fabric_name = 1,
+ .show_starget_node_name = 1,
+ .show_starget_port_name = 1,
+ .show_starget_port_id = 1,
+ .set_rport_dev_loss_tmo = fc_set_rport_loss_tmo,
+ .show_rport_dev_loss_tmo = 1,
+ .get_fc_host_stats = fc_get_host_stats,
+ .issue_fc_host_lip = fcoe_reset,
+
+ .terminate_rport_io = fc_rport_terminate_io,
+};
+
static struct scsi_host_template fcoe_shost_template = {
.module = THIS_MODULE,
.name = "FCoE Driver",
@@ -530,7 +564,10 @@ static int fcoe_shost_config(struct fc_lport *lp, struct Scsi_Host *shost,
lp->host->max_lun = FCOE_MAX_LUN;
lp->host->max_id = FCOE_MAX_FCP_TARGET;
lp->host->max_channel = 0;
- lp->host->transportt = scsi_transport_fcoe_sw;
+ if (lp->vport)
+ lp->host->transportt = fcoe_vport_transport_template;
+ else
+ lp->host->transportt = fcoe_transport_template;
/* add the new host to the SCSI-ml */
rc = scsi_add_host(lp->host, dev);
@@ -836,10 +873,11 @@ out:
static int __init fcoe_if_init(void)
{
/* attach to scsi transport */
- scsi_transport_fcoe_sw =
- fc_attach_transport(&fcoe_transport_function);
+ fcoe_transport_template = fc_attach_transport(&fcoe_transport_function);
+ fcoe_vport_transport_template =
+ fc_attach_transport(&fcoe_vport_transport_function);
- if (!scsi_transport_fcoe_sw) {
+ if (!fcoe_transport_template) {
printk(KERN_ERR "fcoe: Failed to attach to the FC transport\n");
return -ENODEV;
}
@@ -854,8 +892,10 @@ static int __init fcoe_if_init(void)
*/
int __exit fcoe_if_exit(void)
{
- fc_release_transport(scsi_transport_fcoe_sw);
- scsi_transport_fcoe_sw = NULL;
+ fc_release_transport(fcoe_transport_template);
+ fc_release_transport(fcoe_vport_transport_template);
+ fcoe_transport_template = NULL;
+ fcoe_vport_transport_template = NULL;
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
