Hi,
I've been trying to get an AOC-SASLP-MV8 card (pcie x4 2 port SAS card) to
work with linux for the past month or so. I've recently just RMAed my first
card, and tested the new one under linux, and I see the same problems.
The very first time I made a new array off the controller, formated (with xfs)
and mounted the volume, it seemed to work. ioozone even seemed to run for a
while. Sadly after a few minutes I got a stream of mvs_abort_task messages in
dmesg, and any accesses to the volume, or any disks connected to the
controller lock up.
After that I updated my 2.6.31 kernel to 2.6.32-rc3-git2 off of kernel.org,
and the volume fails to mount with the same mvs_abort_task messages.
I've attached my dmesg log from both attempts. dmesg1 is the first attempt,
dmesg2 is the second attempt on the newer kernel.
I would really appreciate some help with this.
--
Thomas Fjellstrom
tfjellstrom@xxxxxxx
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-git4 (root@natasha) (gcc version 4.3.4 (Debian 4.3.4-2) ) #6 SMP PREEMPT Tue Sep 15 09:16:41 MDT 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-git4 root=UUID=272a1709-267d-4134-a6b4-e8d3884dca37 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfde0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfde0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfc00000 page 2M
[ 0.000000] 00cfc00000 - 00cfde0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfde0000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ a000-c000
[ 0.000000] RAMDISK: 376ee000 - 37fef4bf
[ 0.000000] ACPI: RSDP 00000000000f7550 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfde30c0 0731E (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfde0000 00040
[ 0.000000] ACPI: SSDT 00000000cfdea4c0 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfdead80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfdeadc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 00000000cfdeae00 0030A (v01 GBT GBT B0 5455312E BG 53450101)
[ 0.000000] ACPI: APIC 00000000cfdea400 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000038fff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001641f14] TEXT DATA BSS ==> [0001000000 - 0001641f14]
[ 0.000000] #3 [00376ee000 - 0037fef4bf] RAMDISK ==> [00376ee000 - 0037fef4bf]
[ 0.000000] #4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
[ 0.000000] #5 [0001642000 - 0001642106] BRK ==> [0001642000 - 0001642106]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f5b40] f5b40
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000cfde0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1047933
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3836 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833048 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
[ 0.000000] PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 90528 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030804
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-git4 root=UUID=272a1709-267d-4134-a6b4-e8d3884dca37 ro
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 8d2c000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 4050428k/4980736k available (3034k kernel code, 789004k absent, 141304k reserved, 1662k data, 592k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2611.759 MHz processor.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] alloc irq_desc for 24 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.001999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.51 BogoMIPS (lpj=2611755)
[ 0.001999] Security Framework initialized
[ 0.001999] SELinux: Disabled at boot.
[ 0.001999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002836] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003436] Mount-cache hash table entries: 256
[ 0.003599] Initializing cgroup subsys ns
[ 0.003654] Initializing cgroup subsys cpuacct
[ 0.003710] Initializing cgroup subsys devices
[ 0.003765] Initializing cgroup subsys freezer
[ 0.003820] Initializing cgroup subsys net_cls
[ 0.003893] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003951] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004002] CPU 0/0x0 -> Node 0
[ 0.004057] tseg: 00cfe00000
[ 0.004059] CPU: Physical Processor ID: 0
[ 0.004112] CPU: Processor Core ID: 0
[ 0.004167] mce: CPU supports 6 MCE banks
[ 0.004227] using C1E aware idle routine
[ 0.004281] Performance Counters: AMD PMU driver.
[ 0.004378] ... version: 0
[ 0.004432] ... bit width: 48
[ 0.004486] ... generic counters: 4
[ 0.004540] ... value mask: 0000ffffffffffff
[ 0.004595] ... max period: 00007fffffffffff
[ 0.004651] ... fixed-purpose counters: 0
[ 0.004704] ... counter mask: 000000000000000f
[ 0.005314] ACPI: Core revision 20090521
[ 0.014065] Setting APIC routing to flat
[ 0.015412] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.025475] CPU0: AMD Phenom(tm) II X4 810 Processor stepping 02
[ 0.025996] System has AMD C1E enabled
[ 0.025996] Switch to broadcast mode on CPU0
[ 0.026132] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.001999] Initializing CPU#1
[ 0.001999] Calibrating delay using timer specific routine.. 5223.74 BogoMIPS (lpj=2611872)
[ 0.001999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.001999] CPU 1/0x1 -> Node 0
[ 0.001999] CPU: Physical Processor ID: 0
[ 0.001999] CPU: Processor Core ID: 1
[ 0.001999] mce: CPU supports 6 MCE banks
[ 0.001999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.097746] CPU1: AMD Phenom(tm) II X4 810 Processor stepping 02
[ 0.098084] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.099004] Switch to broadcast mode on CPU1
[ 0.099058] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.001999] Initializing CPU#2
[ 0.001999] Calibrating delay using timer specific routine.. 5223.78 BogoMIPS (lpj=2611894)
[ 0.001999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.001999] CPU 2/0x2 -> Node 0
[ 0.001999] CPU: Physical Processor ID: 0
[ 0.001999] CPU: Processor Core ID: 2
[ 0.001999] mce: CPU supports 6 MCE banks
[ 0.001999] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.170713] CPU2: AMD Phenom(tm) II X4 810 Processor stepping 02
[ 0.171077] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.171994] Switch to broadcast mode on CPU2
[ 0.172052] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.001999] Initializing CPU#3
[ 0.001999] Calibrating delay using timer specific routine.. 5223.78 BogoMIPS (lpj=2611890)
[ 0.001999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.001999] CPU 3/0x3 -> Node 0
[ 0.001999] CPU: Physical Processor ID: 0
[ 0.001999] CPU: Processor Core ID: 3
[ 0.001999] mce: CPU supports 6 MCE banks
[ 0.001999] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.243690] CPU3: AMD Phenom(tm) II X4 810 Processor stepping 02
[ 0.244066] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.244984] Brought up 4 CPUs
[ 0.244983] Switch to broadcast mode on CPU3
[ 0.245091] Total of 4 processors activated (20894.82 BogoMIPS).
[ 0.245253] CPU0 attaching sched-domain:
[ 0.245256] domain 0: span 0-3 level MC
[ 0.245258] groups: 0 1 2 3
[ 0.245262] domain 1: span 0-3 level NODE
[ 0.245264] groups: 0-3 (cpu_power = 4096)
[ 0.245268] CPU1 attaching sched-domain:
[ 0.245270] domain 0: span 0-3 level MC
[ 0.245271] groups: 1 2 3 0
[ 0.245275] domain 1: span 0-3 level NODE
[ 0.245277] groups: 0-3 (cpu_power = 4096)
[ 0.245281] CPU2 attaching sched-domain:
[ 0.245282] domain 0: span 0-3 level MC
[ 0.245284] groups: 2 3 0 1
[ 0.245287] domain 1: span 0-3 level NODE
[ 0.245289] groups: 0-3 (cpu_power = 4096)
[ 0.245293] CPU3 attaching sched-domain:
[ 0.245294] domain 0: span 0-3 level MC
[ 0.245296] groups: 3 0 1 2
[ 0.245299] domain 1: span 0-3 level NODE
[ 0.245301] groups: 0-3 (cpu_power = 4096)
[ 0.246073] Booting paravirtualized kernel on bare hardware
[ 0.246159] regulator: core version 0.5
[ 0.246159] NET: Registered protocol family 16
[ 0.246159] node 0 link 0: io port [a000, ffff]
[ 0.246159] TOM: 00000000d0000000 aka 3328M
[ 0.246964] Fam 10h mmconf [e0000000, e00fffff]
[ 0.246966] node 0 link 0: mmio [a0000, bffff]
[ 0.246968] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.246971] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.246973] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
[ 0.246976] TOM2: 0000000130000000 aka 4864M
[ 0.247031] bus: [00,05] on node 0 link 0
[ 0.247033] bus: 00 index 0 io port: [0, ffff]
[ 0.247035] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.247036] bus: 00 index 2 mmio: [d0000000, dfffffff]
[ 0.247038] bus: 00 index 3 mmio: [e0600000, ffffffff]
[ 0.247040] bus: 00 index 4 mmio: [e0100000, e05fffff]
[ 0.247041] bus: 00 index 5 mmio: [130000000, fcffffffff]
[ 0.247050] ACPI: bus type pci registered
[ 0.247113] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.247113] PCI: MCFG area at e0000000 reserved in E820
[ 0.258554] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.258610] PCI: Using configuration type 1 for base access
[ 0.260076] bio: create slab <bio-0> at 0
[ 0.261087] ACPI: EC: Look up EC in DSDT
[ 0.267635] ACPI: Interpreter enabled
[ 0.267693] ACPI: (supports S0 S3 S4 S5)
[ 0.267929] ACPI: Using IOAPIC for interrupt routing
[ 0.273193] ACPI: No dock devices found.
[ 0.274051] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.274177] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.274177] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.274177] pci 0000:00:02.0: PME# disabled
[ 0.274177] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.274221] pci 0000:00:07.0: PME# disabled
[ 0.274302] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.274358] pci 0000:00:09.0: PME# disabled
[ 0.274438] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.274495] pci 0000:00:0b.0: PME# disabled
[ 0.274592] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
[ 0.274599] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.274605] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.274611] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.274617] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.274624] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
[ 0.274673] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
[ 0.274724] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.274743] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
[ 0.274743] pci 0000:00:12.2: supports D1 D2
[ 0.274743] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.274743] pci 0000:00:12.2: PME# disabled
[ 0.274743] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.274743] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[ 0.274743] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
[ 0.274743] pci 0000:00:13.2: supports D1 D2
[ 0.274743] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.274743] pci 0000:00:13.2: PME# disabled
[ 0.274743] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.274743] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.274743] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.274743] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.274743] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f]
[ 0.274743] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
[ 0.274743] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.274770] pci 0000:00:14.2: PME# disabled
[ 0.274919] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff]
[ 0.275055] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.275063] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.275071] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.275076] pci 0000:01:00.0: reg 24 io port: [0xcf00-0xcf7f]
[ 0.275081] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.275145] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.275148] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.275151] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.275183] pci 0000:02:00.0: reg 10 io port: [0xbe00-0xbeff]
[ 0.275197] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdbff000-0xfdbfffff]
[ 0.275207] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdbf8000-0xfdbfbfff]
[ 0.275213] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.275239] pci 0000:02:00.0: supports D1 D2
[ 0.275241] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.275300] pci 0000:02:00.0: PME# disabled
[ 0.275408] pci 0000:00:07.0: bridge io port: [0xb000-0xbfff]
[ 0.275410] pci 0000:00:07.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.275414] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.275446] pci 0000:03:00.0: reg 10 io port: [0xee00-0xeeff]
[ 0.275459] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff]
[ 0.275469] pci 0000:03:00.0: reg 20 64bit mmio: [0xfdff8000-0xfdffbfff]
[ 0.275475] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.275502] pci 0000:03:00.0: supports D1 D2
[ 0.275504] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.275562] pci 0000:03:00.0: PME# disabled
[ 0.275670] pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
[ 0.275672] pci 0000:00:09.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.275676] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.275711] pci 0000:04:00.0: reg 18 io port: [0xdf00-0xdf7f]
[ 0.275723] pci 0000:04:00.0: reg 20 64bit mmio: [0xfdef0000-0xfdefffff]
[ 0.275728] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x03ffff]
[ 0.275749] pci 0000:04:00.0: supports D1
[ 0.275751] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[ 0.275808] pci 0000:04:00.0: PME# disabled
[ 0.275908] pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff]
[ 0.275911] pci 0000:00:0b.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.275914] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.275987] pci 0000:05:0e.0: reg 10 32bit mmio: [0xfdaff000-0xfdaff7ff]
[ 0.275995] pci 0000:05:0e.0: reg 14 32bit mmio: [0xfdaf8000-0xfdafbfff]
[ 0.276050] pci 0000:05:0e.0: supports D1 D2
[ 0.276052] pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.276111] pci 0000:05:0e.0: PME# disabled
[ 0.276197] pci 0000:00:14.4: transparent bridge
[ 0.276254] pci 0000:00:14.4: bridge io port: [0xa000-0xafff]
[ 0.276258] pci 0000:00:14.4: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.276262] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.276278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.276525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.276598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.276651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.276696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.276741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT]
[ 0.298023] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.298618] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.298749] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.299033] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.299625] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.301212] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.301804] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.302377] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.303061] usbcore: registered new interface driver usbfs
[ 0.303061] usbcore: registered new interface driver hub
[ 0.303067] usbcore: registered new device driver usb
[ 0.303067] PCI: Using ACPI for IRQ routing
[ 0.303067] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.303084] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.303232] PCI-DMA: Disabling AGP.
[ 0.303969] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.304012] PCI-DMA: using GART IOMMU.
[ 0.304067] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.305739] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.306005] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.308986] hpet: hpet2 irq 24 for MSI
[ 0.312720] pnp: PnP ACPI init
[ 0.312786] ACPI: bus type pnp registered
[ 0.316541] pnp 00:0d: mem resource (0xd6c00-0xd7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.316611] pnp 00:0d: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.316680] pnp 00:0d: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.316749] pnp 00:0d: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.316823] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.316892] pnp 00:0d: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.317064] pnp: PnP ACPI: found 14 devices
[ 0.317119] ACPI: ACPI bus type pnp unregistered
[ 0.317181] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.317238] system 00:01: ioport range 0x220-0x225 has been reserved
[ 0.317295] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.317355] system 00:02: ioport range 0x4100-0x411f has been reserved
[ 0.317412] system 00:02: ioport range 0x228-0x22f has been reserved
[ 0.317469] system 00:02: ioport range 0x40b-0x40b has been reserved
[ 0.317526] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 0.317583] system 00:02: ioport range 0xc00-0xc01 has been reserved
[ 0.317640] system 00:02: ioport range 0xc14-0xc14 has been reserved
[ 0.317697] system 00:02: ioport range 0xc50-0xc52 has been reserved
[ 0.317755] system 00:02: ioport range 0xc6c-0xc6d has been reserved
[ 0.317812] system 00:02: ioport range 0xc6f-0xc6f has been reserved
[ 0.317874] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
[ 0.317932] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
[ 0.317989] system 00:02: ioport range 0xcd4-0xcdf has been reserved
[ 0.318046] system 00:02: ioport range 0x4000-0x40fe has been reserved
[ 0.318103] system 00:02: ioport range 0x4210-0x4217 has been reserved
[ 0.318160] system 00:02: ioport range 0xb00-0xb0f has been reserved
[ 0.318217] system 00:02: ioport range 0xb10-0xb1f has been reserved
[ 0.318274] system 00:02: ioport range 0xb20-0xb3f has been reserved
[ 0.318336] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.318396] system 00:0d: iomem range 0xcfde0000-0xcfdfffff could not be reserved
[ 0.318463] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.318521] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.318588] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.318646] system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.323709] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.323766] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.323827] pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff
[ 0.323884] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.323952] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02
[ 0.324012] pci 0000:00:07.0: IO window: 0xb000-0xbfff
[ 0.324069] pci 0000:00:07.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.324126] pci 0000:00:07.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.324194] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.324250] pci 0000:00:09.0: IO window: 0xe000-0xefff
[ 0.324307] pci 0000:00:09.0: MEM window: 0xfd800000-0xfd8fffff
[ 0.324364] pci 0000:00:09.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.324431] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
[ 0.324487] pci 0000:00:0b.0: IO window: 0xd000-0xdfff
[ 0.324544] pci 0000:00:0b.0: MEM window: 0xfde00000-0xfdefffff
[ 0.324600] pci 0000:00:0b.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.324668] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.324725] pci 0000:00:14.4: IO window: 0xa000-0xafff
[ 0.324783] pci 0000:00:14.4: MEM window: 0xfda00000-0xfdafffff
[ 0.324845] pci 0000:00:14.4: PREFETCH window: 0xfd900000-0xfd9fffff
[ 0.324908] alloc irq_desc for 18 on node 0
[ 0.324910] alloc kstat_irqs on node 0
[ 0.324919] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.324977] pci 0000:00:02.0: setting latency timer to 64
[ 0.324981] alloc irq_desc for 19 on node 0
[ 0.324983] alloc kstat_irqs on node 0
[ 0.324989] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.325047] pci 0000:00:07.0: setting latency timer to 64
[ 0.325052] alloc irq_desc for 17 on node 0
[ 0.325053] alloc kstat_irqs on node 0
[ 0.325059] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.325117] pci 0000:00:09.0: setting latency timer to 64
[ 0.325121] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.325178] pci 0000:00:0b.0: setting latency timer to 64
[ 0.325185] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.325187] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.325189] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.325191] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.325193] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.325196] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.325198] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.325200] pci_bus 0000:02: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.325202] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.325204] pci_bus 0000:03: resource 1 mem: [0xfd800000-0xfd8fffff]
[ 0.325205] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.325208] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.325209] pci_bus 0000:04: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.325211] pci_bus 0000:04: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.325214] pci_bus 0000:05: resource 0 io: [0xa000-0xafff]
[ 0.325215] pci_bus 0000:05: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.325217] pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.325219] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.325221] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.325291] NET: Registered protocol family 2
[ 0.325490] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.326482] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.328708] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.329049] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.329106] TCP reno registered
[ 0.329272] NET: Registered protocol family 1
[ 0.329372] Trying to unpack rootfs image as initramfs...
[ 0.488674] Freeing initrd memory: 9221k freed
[ 0.492379] audit: initializing netlink socket (disabled)
[ 0.492444] type=2000 audit(1255103185.491:1): initialized
[ 0.492787] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.493012] VFS: Disk quotas dquot_6.5.2
[ 0.493098] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.493199] msgmni has been set to 7929
[ 0.493441] alg: No test for stdrng (krng)
[ 0.493547] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.493614] io scheduler noop registered
[ 0.493668] io scheduler anticipatory registered
[ 0.493722] io scheduler deadline registered
[ 0.493796] io scheduler cfq registered (default)
[ 0.512928] Switched to high resolution mode on CPU 3
[ 0.512931] Switched to high resolution mode on CPU 1
[ 0.512932] Switched to high resolution mode on CPU 2
[ 0.513119] Switched to high resolution mode on CPU 0
[ 0.600310] pci 0000:01:00.0: Boot video device
[ 0.600459] alloc irq_desc for 25 on node 0
[ 0.600461] alloc kstat_irqs on node 0
[ 0.600469] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.600473] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.600626] alloc irq_desc for 26 on node 0
[ 0.600628] alloc kstat_irqs on node 0
[ 0.600632] pcieport-driver 0000:00:07.0: irq 26 for MSI/MSI-X
[ 0.600636] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 0.600761] alloc irq_desc for 27 on node 0
[ 0.600762] alloc kstat_irqs on node 0
[ 0.600767] pcieport-driver 0000:00:09.0: irq 27 for MSI/MSI-X
[ 0.600771] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.600902] alloc irq_desc for 28 on node 0
[ 0.600904] alloc kstat_irqs on node 0
[ 0.600908] pcieport-driver 0000:00:0b.0: irq 28 for MSI/MSI-X
[ 0.600912] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 0.603709] Linux agpgart interface v0.103
[ 0.608082] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.608281] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.608699] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.610260] brd: module loaded
[ 0.610380] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.610596] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.610652] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.610804] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.611015] mice: PS/2 mouse device common for all mice
[ 0.611122] rtc_cmos 00:05: RTC can wake from S4
[ 0.611226] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.611315] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.611403] cpuidle: using governor ladder
[ 0.611458] cpuidle: using governor menu
[ 0.611514] No iBFT detected.
[ 0.611852] TCP cubic registered
[ 0.611967] NET: Registered protocol family 10
[ 0.612441] lo: Disabled Privacy Extensions
[ 0.612760] Mobile IPv6
[ 0.612814] NET: Registered protocol family 17
[ 0.613009] registered taskstats version 1
[ 0.613221] rtc_cmos 00:05: setting system clock to 2009-10-09 15:46:26 UTC (1255103186)
[ 0.613329] Freeing unused kernel memory: 592k freed
[ 0.613520] Write protecting the kernel read-only data: 4108k
[ 0.653320] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.721859] Floppy drive(s): fd0 is 1.44M
[ 0.739054] FDC 0 is a post-1991 82077
[ 0.748060] SCSI subsystem initialized
[ 0.779359] libata version 3.00 loaded.
[ 0.784660] ahci 0000:00:11.0: version 3.0
[ 0.784676] alloc irq_desc for 22 on node 0
[ 0.784678] alloc kstat_irqs on node 0
[ 0.784689] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.784882] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.784950] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.785681] scsi0 : ahci
[ 0.785835] scsi1 : ahci
[ 0.785928] scsi2 : ahci
[ 0.786028] scsi3 : ahci
[ 0.786118] scsi4 : ahci
[ 0.786206] scsi5 : ahci
[ 0.786366] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 0.786434] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 0.786501] ata3: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 22
[ 0.786569] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 0.786636] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[ 0.786703] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[ 0.789058] Uniform Multi-Platform E-IDE driver
[ 0.790332] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.791328] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.791416] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.791541] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.791629] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.791710] ehci_hcd 0000:00:12.2: debug port 1
[ 0.791785] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 0.792352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.798026] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.798105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.798167] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.798237] usb usb1: Product: EHCI Host Controller
[ 0.798297] usb usb1: Manufacturer: Linux 2.6.31-git4 ehci_hcd
[ 0.798353] usb usb1: SerialNumber: 0000:00:12.2
[ 0.798458] usb usb1: configuration #1 chosen from 1 choice
[ 0.798537] hub 1-0:1.0: USB hub found
[ 0.798596] hub 1-0:1.0: 6 ports detected
[ 0.798723] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.798793] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.798898] r8169 0000:02:00.0: setting latency timer to 64
[ 0.798928] alloc irq_desc for 29 on node 0
[ 0.798930] alloc kstat_irqs on node 0
[ 0.798941] r8169 0000:02:00.0: irq 29 for MSI/MSI-X
[ 0.799456] eth0: RTL8168d/8111d at 0xffffc90000676000, 00:24:1d:18:f8:b2, XID 081000c0 IRQ 29
[ 0.803223] alloc irq_desc for 16 on node 0
[ 0.803225] alloc kstat_irqs on node 0
[ 0.803235] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.803306] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.803397] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[ 0.803495] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 0.803557] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.803620] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.803695] r8169 0000:03:00.0: setting latency timer to 64
[ 0.803724] alloc irq_desc for 30 on node 0
[ 0.803725] alloc kstat_irqs on node 0
[ 0.803733] r8169 0000:03:00.0: irq 30 for MSI/MSI-X
[ 0.804244] eth1: RTL8168d/8111d at 0xffffc9000063e000, 00:24:1d:18:f8:f3, XID 081000c0 IRQ 30
[ 0.858156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.858216] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.858281] usb usb2: Product: OHCI Host Controller
[ 0.858336] usb usb2: Manufacturer: Linux 2.6.31-git4 ohci_hcd
[ 0.858392] usb usb2: SerialNumber: 0000:00:12.0
[ 0.858494] usb usb2: configuration #1 chosen from 1 choice
[ 0.858572] hub 2-0:1.0: USB hub found
[ 0.858632] hub 2-0:1.0: 3 ports detected
[ 0.858793] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.858863] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.858942] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 0.859032] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.859113] ehci_hcd 0000:00:13.2: debug port 1
[ 0.859190] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 0.865113] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.865184] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.865241] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.865311] usb usb3: Product: EHCI Host Controller
[ 0.865366] usb usb3: Manufacturer: Linux 2.6.31-git4 ehci_hcd
[ 0.865421] usb usb3: SerialNumber: 0000:00:13.2
[ 0.865511] usb usb3: configuration #1 chosen from 1 choice
[ 0.865586] hub 3-0:1.0: USB hub found
[ 0.865645] hub 3-0:1.0: 6 ports detected
[ 0.865916] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.865982] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.866074] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.866155] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 0.921134] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921192] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921257] usb usb4: Product: OHCI Host Controller
[ 0.921318] usb usb4: Manufacturer: Linux 2.6.31-git4 ohci_hcd
[ 0.921374] usb usb4: SerialNumber: 0000:00:12.1
[ 0.921462] usb usb4: configuration #1 chosen from 1 choice
[ 0.921536] hub 4-0:1.0: USB hub found
[ 0.921596] hub 4-0:1.0: 3 ports detected
[ 0.921744] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.921811] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.921894] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.921985] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 0.977149] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.977210] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.977275] usb usb5: Product: OHCI Host Controller
[ 0.977330] usb usb5: Manufacturer: Linux 2.6.31-git4 ohci_hcd
[ 0.977386] usb usb5: SerialNumber: 0000:00:13.0
[ 0.977474] usb usb5: configuration #1 chosen from 1 choice
[ 0.977547] hub 5-0:1.0: USB hub found
[ 0.977607] hub 5-0:1.0: 3 ports detected
[ 0.977755] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.977820] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.977900] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 0.977980] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.033148] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.033209] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.033275] usb usb6: Product: OHCI Host Controller
[ 1.033330] usb usb6: Manufacturer: Linux 2.6.31-git4 ohci_hcd
[ 1.033386] usb usb6: SerialNumber: 0000:00:13.1
[ 1.033473] usb usb6: configuration #1 chosen from 1 choice
[ 1.033553] hub 6-0:1.0: USB hub found
[ 1.033612] hub 6-0:1.0: 3 ports detected
[ 1.033770] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.033837] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.033918] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.033998] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.089153] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.089212] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.089282] usb usb7: Product: OHCI Host Controller
[ 1.089341] usb usb7: Manufacturer: Linux 2.6.31-git4 ohci_hcd
[ 1.089396] usb usb7: SerialNumber: 0000:00:14.5
[ 1.089494] usb usb7: configuration #1 chosen from 1 choice
[ 1.089569] hub 7-0:1.0: USB hub found
[ 1.089630] hub 7-0:1.0: 2 ports detected
[ 1.093339] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.093357] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.095880] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.246140] ata1: softreset failed (device not ready)
[ 1.246198] ata1: applying SB600 PMP SRST workaround and retrying
[ 1.250540] ata2: softreset failed (device not ready)
[ 1.250602] ata2: applying SB600 PMP SRST workaround and retrying
[ 1.287121] usb 2-3: new low speed USB device using ohci_hcd and address 2
[ 1.403141] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.403168] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.403831] ata1.00: ATA-7: OCZ-VERTEX v1.10, 1370, max UDMA/133
[ 1.403890] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.404718] ata1.00: configured for UDMA/133
[ 1.415203] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX v1.10 1370 PQ: 0 ANSI: 5
[ 1.430494] ata2.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 1.430551] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.437295] usb 2-3: New USB device found, idVendor=046d, idProduct=c01d
[ 1.437353] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.437415] usb 2-3: Product: USB-PS/2 Optical Mouse
[ 1.437475] usb 2-3: Manufacturer: Logitech
[ 1.437586] usb 2-3: configuration #1 chosen from 1 choice
[ 1.470145] ata2.00: configured for UDMA/133
[ 1.481188] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 1.663122] ata3: softreset failed (device not ready)
[ 1.663182] ata3: applying SB600 PMP SRST workaround and retrying
[ 1.816140] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.817402] ata3.00: ATAPI: PIONEER DVD-RW DVR-212D, 1.21, max UDMA/66
[ 1.819117] ata3.00: configured for UDMA/66
[ 1.836289] scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-212D 1.21 PQ: 0 ANSI: 5
[ 1.843129] usbcore: registered new interface driver hiddev
[ 1.847788] mvsas 0000:04:00.0: mvsas: driver version 0.8.2
[ 1.847858] mvsas 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.847918] mvsas 0000:04:00.0: setting latency timer to 64
[ 1.848419] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb2/2-3/2-3:1.0/input/input2
[ 1.848533] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-3/input0
[ 1.848624] usbcore: registered new interface driver usbhid
[ 1.848682] usbhid: v2.6:USB HID core driver
[ 1.853150] firewire_ohci 0000:05:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.853296] mvsas 0000:04:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 1.853566] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
[ 1.853632] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.853714] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
[ 1.853775] ide0: BM-DMA at 0xfa00-0xfa07
[ 1.853843] atiixp 0000:00:14.1: simplex device: DMA disabled
[ 1.853899] ide1: DMA disabled
[ 1.853961] Probing IDE interface ide0...
[ 1.854329] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 1.854350] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.854411] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.854413] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.854428] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.854523] sdb:
[ 1.854656] sd 0:0:0:0: [sda] Write Protect is off
[ 1.854762] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.854777] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.854929] sda: sda2
[ 1.855781] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.870551] sdb1 sdb2 sdb3 sdb4
[ 1.897112] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.910121] firewire_ohci: Added fw-ohci device 0000:05:0e.0, OHCI version 1.10
[ 1.917557] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.917617] Uniform CD-ROM driver Revision: 3.20
[ 1.917745] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.921951] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.922029] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.922103] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 2.372161] Probing IDE interface ide1...
[ 2.375165] ide1: no devices on the port
[ 2.375267] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.375412] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.409180] firewire_core: created device fw0: GUID 001a9c2c0000241d, S400
[ 6.231147] drivers/scsi/mvsas/mv_sas.c 1214:port 0 attach dev info is 20004
[ 6.231151] drivers/scsi/mvsas/mv_sas.c 1216:port 0 attach sas addr is 0
[ 6.432142] drivers/scsi/mvsas/mv_sas.c 1214:port 1 attach dev info is 0
[ 6.432145] drivers/scsi/mvsas/mv_sas.c 1216:port 1 attach sas addr is 1
[ 6.633125] drivers/scsi/mvsas/mv_sas.c 1214:port 2 attach dev info is 2000000
[ 6.633133] drivers/scsi/mvsas/mv_sas.c 1216:port 2 attach sas addr is 2
[ 6.834160] drivers/scsi/mvsas/mv_sas.c 1214:port 3 attach dev info is 2000000
[ 6.834162] drivers/scsi/mvsas/mv_sas.c 1216:port 3 attach sas addr is 3
[ 6.935122] drivers/scsi/mvsas/mv_sas.c 1214:port 4 attach dev info is 0
[ 6.935124] drivers/scsi/mvsas/mv_sas.c 1216:port 4 attach sas addr is 0
[ 7.036124] drivers/scsi/mvsas/mv_sas.c 1214:port 5 attach dev info is 0
[ 7.036126] drivers/scsi/mvsas/mv_sas.c 1216:port 5 attach sas addr is 0
[ 7.137134] drivers/scsi/mvsas/mv_sas.c 1214:port 6 attach dev info is 0
[ 7.137136] drivers/scsi/mvsas/mv_sas.c 1216:port 6 attach sas addr is 0
[ 7.338143] drivers/scsi/mvsas/mv_sas.c 1214:port 7 attach dev info is 0
[ 7.338145] drivers/scsi/mvsas/mv_sas.c 1216:port 7 attach sas addr is 7
[ 7.338150] scsi6 : mvsas
[ 7.338546] drivers/scsi/mvsas/mv_sas.c 380:phy 0 byte dmaded.
[ 7.338550] drivers/scsi/mvsas/mv_sas.c 380:phy 1 byte dmaded.
[ 7.338553] drivers/scsi/mvsas/mv_sas.c 380:phy 2 byte dmaded.
[ 7.338555] drivers/scsi/mvsas/mv_sas.c 380:phy 3 byte dmaded.
[ 7.338558] drivers/scsi/mvsas/mv_sas.c 380:phy 7 byte dmaded.
[ 7.339998] drivers/scsi/mvsas/mv_sas.c 1365:found dev[0:5] is gone.
[ 7.367233] ata7.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 7.367292] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.407675] device-mapper: uevent: version 1.0.3
[ 7.407778] ata7.00: configured for UDMA/133
[ 7.407880] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 7.407892] scsi 6:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 7.408837] drivers/scsi/mvsas/mv_sas.c 1365:found dev[1:5] is gone.
[ 7.410467] ata8.00: ATA-8: ST31000523AS, CC35, max UDMA/133
[ 7.410526] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.412150] ata8.00: configured for UDMA/133
[ 7.412246] scsi 6:0:1:0: Direct-Access ATA ST31000523AS CC35 PQ: 0 ANSI: 5
[ 7.413309] drivers/scsi/mvsas/mv_sas.c 1365:found dev[2:5] is gone.
[ 7.440486] ata9.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 7.440544] ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.474618] kjournald starting. Commit interval 5 seconds
[ 7.474681] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.480250] ata9.00: configured for UDMA/133
[ 7.480361] scsi 6:0:2:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 7.481417] drivers/scsi/mvsas/mv_sas.c 1365:found dev[3:5] is gone.
[ 7.508612] ata10.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 7.508671] ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.548354] ata10.00: configured for UDMA/133
[ 7.548454] scsi 6:0:3:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 7.549597] drivers/scsi/mvsas/mv_sas.c 1365:found dev[4:5] is gone.
[ 7.576709] ata11.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 7.576767] ata11.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.616371] ata11.00: configured for UDMA/133
[ 7.616484] scsi 6:0:4:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 7.632026] udev: starting version 146
[ 7.666064] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.666135] ACPI: Power Button [PWRF]
[ 7.666241] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 7.666309] ACPI: Power Button [PWRB]
[ 7.671040] processor LNXCPU:00: registered as cooling_device0
[ 7.671134] processor LNXCPU:01: registered as cooling_device1
[ 7.671223] processor LNXCPU:02: registered as cooling_device2
[ 7.671308] processor LNXCPU:03: registered as cooling_device3
[ 7.675682] ACPI: WMI: Mapper loaded
[ 7.680946] parport_pc 00:0a: reported by Plug and Play ACPI
[ 7.681057] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.707580] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.709487] EDAC MC: Ver: 2.1.0 Sep 15 2009
[ 7.710297] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[ 7.710367] ACPI: Device needs an ACPI driver
[ 7.710735] piix4_smbus: probe of 0000:00:14.0 failed with error -16
[ 7.717732] EDAC amd64_edac: Ver: 3.2.0 Sep 15 2009
[ 7.717913] EDAC amd64: This node reports that Memory ECC is currently disabled.
[ 7.717983] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
[ 7.718070] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
[ 7.718071] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
[ 7.718072] Might be a BIOS bug, if BIOS says ECC is enabled
[ 7.718073] Use of the override can cause unknown side effects.
[ 7.718339] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 7.771744] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.813481] hda_codec: ALC889A: BIOS auto-probing.
[ 7.815121] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 7.979181] Adding 8385920k swap on /dev/sdb4. Priority:-1 extents:1 across:8385920k
[ 8.004544] EXT3 FS on sda2, internal journal
[ 8.024904] loop: module loaded
[ 8.037740] it87: Found IT8720F chip at 0x228, revision 5
[ 8.037804] it87: in3 is VCC (+5V)
[ 8.347238] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 8.347385] sd 6:0:1:0: Attached scsi generic sg4 type 0
[ 8.347527] sd 6:0:2:0: Attached scsi generic sg5 type 0
[ 8.347668] sd 6:0:3:0: Attached scsi generic sg6 type 0
[ 8.347809] sd 6:0:4:0: Attached scsi generic sg7 type 0
[ 8.348206] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.348305] sd 6:0:0:0: [sdc] Write Protect is off
[ 8.349210] sd 6:0:1:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.349240] sd 6:0:1:0: [sdd] Write Protect is off
[ 8.349242] sd 6:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 8.349257] sd 6:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.349360] sdd:
[ 8.349410] sd 6:0:2:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.349437] sd 6:0:2:0: [sde] Write Protect is off
[ 8.349439] sd 6:0:2:0: [sde] Mode Sense: 00 3a 00 00
[ 8.349453] sd 6:0:2:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.349528] sde:
[ 8.349568] sd 6:0:3:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.349595] sd 6:0:3:0: [sdf] Write Protect is off
[ 8.349597] sd 6:0:3:0: [sdf] Mode Sense: 00 3a 00 00
[ 8.349611] sd 6:0:3:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.349682] sdf:
[ 8.349723] sd 6:0:4:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.349750] sd 6:0:4:0: [sdg] Write Protect is off
[ 8.349752] sd 6:0:4:0: [sdg] Mode Sense: 00 3a 00 00
[ 8.349766] sd 6:0:4:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.349839] sdg:
[ 8.353618] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 8.353685] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.353868] sdc: sde1
[ 8.354568] sd 6:0:2:0: [sde] Attached SCSI disk
[ 8.359595] sdd1
[ 8.359870] sd 6:0:1:0: [sdd] Attached SCSI disk
[ 8.361505] sdf1 sdf2 sdf3 sdf4 < sdc1
[ 8.364206] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 8.367277] sdg1
[ 8.367541] sd 6:0:4:0: [sdg] Attached SCSI disk
[ 8.372247] sdf5 sdf6
[ 8.386534] kjournald starting. Commit interval 5 seconds
[ 8.386900] EXT3 FS on sdb3, internal journal
[ 8.387000] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.401321] sdf7 >
[ 8.420020] sd 6:0:3:0: [sdf] Attached SCSI disk
[ 8.688189] Bridge firewalling registered
[ 8.690742] device eth0 entered promiscuous mode
[ 8.691857] r8169: eth0: link down
[ 8.691919] r8169: eth0: link down
[ 8.692456] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.773119] br0: no IPv6 routers present
[ 78.193964] RPC: Registered udp transport module.
[ 78.194029] RPC: Registered tcp transport module.
[ 78.205108] Slow work thread pool: Starting up
[ 78.205300] Slow work thread pool: Ready
[ 78.205389] FS-Cache: Loaded
[ 78.221245] FS-Cache: Netfs 'nfs' registered for caching
[ 78.234474] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 78.602077] kvm: Nested Virtualization enabled
[ 78.602140] kvm: Nested Paging enabled
[ 78.638145] powernow-k8: Found 1 AMD Phenom(tm) II X4 810 Processor processors (4 cpu cores) (version 2.20.00)
[ 78.638182] powernow-k8: 0 : pstate 0 (2600 MHz)
[ 78.638184] powernow-k8: 1 : pstate 1 (1900 MHz)
[ 78.638185] powernow-k8: 2 : pstate 2 (1400 MHz)
[ 78.638187] powernow-k8: 3 : pstate 3 (800 MHz)
[ 80.422243] CE: hpet increasing min_delta_ns to 15000 nsec
[ 80.654350] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 80.654358] vboxdrv: Successfully done.
[ 80.654363] vboxdrv: Found 4 processor cores.
[ 80.654486] VBoxDrv: dbg - g_abExecMemory=ffffffffa04b38e0
[ 80.654680] vboxdrv: fAsync=0 offMin=0x78a offMax=0xaad4
[ 80.654838] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 80.654914] vboxdrv: Successfully loaded version 3.0.8 (interface 0x000e0000).
[ 80.869190] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa064f620
[ 80.876672] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa06661e0
[ 82.581970] svc: failed to register lockdv1 RPC service (errno 97).
[ 82.583916] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 82.588079] NFSD: starting 90-second grace period
[ 82.611836] nvidia: module license 'NVIDIA' taints kernel.
[ 82.611846] Disabling lock debugging due to kernel taint
[ 82.670113] process `upsagentd' is using obsolete setsockopt SO_BSDCOMPAT
[ 82.869005] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 82.869051] nvidia 0000:01:00.0: setting latency timer to 64
[ 82.869519] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.32 Wed Sep 2 02:23:20 PDT 2009
[ 82.994455] CE: hpet increasing min_delta_ns to 22500 nsec
[ 82.994554] CE: hpet increasing min_delta_ns to 33750 nsec
[ 82.994644] CE: hpet increasing min_delta_ns to 50624 nsec
[ 83.137500] lo: Disabled Privacy Extensions
[ 127.195163] device eth0 left promiscuous mode
[ 127.195174] br0: port 1(eth0) entering disabled state
[ 127.403611] device eth0 entered promiscuous mode
[ 127.408070] r8169: eth0: link down
[ 127.408543] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 136.484315] r8169: eth0: link up
[ 136.485790] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 136.486541] br0: port 1(eth0) entering learning state
[ 138.374167] br0: no IPv6 routers present
[ 146.574168] eth0: no IPv6 routers present
[ 151.486173] br0: port 1(eth0) entering forwarding state
[ 450.706602] md: nonpersistent superblock ...
[ 450.706612] md: bind<sdc>
[ 450.706661] md: nonpersistent superblock ...
[ 450.706666] md: bind<sdd>
[ 450.706707] md: nonpersistent superblock ...
[ 450.706712] md: bind<sde>
[ 450.706751] md: nonpersistent superblock ...
[ 450.706756] md: bind<sdf>
[ 450.706800] md: nonpersistent superblock ...
[ 450.706805] md: bind<sdg>
[ 450.711518] md: raid0 personality registered for level 0
[ 450.713200] raid0: looking at sdg
[ 450.713209] raid0: comparing sdg(1953524736)
[ 450.713215] with sdg(1953524736)
[ 450.713219] raid0: END
[ 450.713222] raid0: ==> UNIQUE
[ 450.713226] raid0: 1 zones
[ 450.713230] raid0: looking at sdf
[ 450.713235] raid0: comparing sdf(1953524736)
[ 450.713239] with sdg(1953524736)
[ 450.713243] raid0: EQUAL
[ 450.713246] raid0: looking at sde
[ 450.713250] raid0: comparing sde(1953524736)
[ 450.713255] with sdg(1953524736)
[ 450.713258] raid0: EQUAL
[ 450.713262] raid0: looking at sdd
[ 450.713266] raid0: comparing sdd(1953524736)
[ 450.713270] with sdg(1953524736)
[ 450.713274] raid0: EQUAL
[ 450.713278] raid0: looking at sdc
[ 450.713282] raid0: comparing sdc(1953524736)
[ 450.713286] with sdg(1953524736)
[ 450.713290] raid0: EQUAL
[ 450.713294] raid0: FINAL 1 zones
[ 450.713302] raid0: done.
[ 450.713306] raid0 : md_size is 9767623680 sectors.
[ 450.713314] ******* md0 configuration *********
[ 450.713320] zone0=[sdc/sdd/sde/sdf/sdg/]
[ 450.713351] zone offset=0kb device offset=0kb size=4883811840kb
[ 450.713359] **********************************
[ 450.713361]
[ 450.713408] md0: detected capacity change from 0 to 5001023324160
[ 450.717296] md0: unknown partition table
[ 554.733043] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 554.734832] SGI XFS Quota Management subsystem
[ 554.735217] XFS: unknown mount option [errors-remount-ro].
[ 572.959263] Filesystem "md0": Disabling barriers, trial barrier write failed
[ 572.984146] XFS mounting filesystem md0
[ 573.232159] Ending clean XFS mount for filesystem: md0
[ 1113.704178] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1113.704187] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1113.704204] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1113.704210] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1113.704222] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1113.704228] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1113.704238] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1113.704243] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1113.704256] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1113.704261] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1144.704187] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1144.704196] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1144.704213] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1144.704218] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1144.704231] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1144.704236] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1144.704246] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1144.704251] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1144.704264] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1144.704269] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1175.704199] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1175.704208] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1175.704226] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1175.704232] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1175.704243] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1175.704249] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1175.704258] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1175.704264] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1175.704276] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1175.704281] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1206.704199] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1206.704208] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1206.704224] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1206.704229] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1206.704241] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1206.704246] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1206.704256] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1206.704261] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1206.704274] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1206.704279] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1237.704183] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1237.704192] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1237.704210] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1237.704216] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1237.704228] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1237.704233] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1237.704243] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1237.704248] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1237.704260] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1237.704266] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1268.704204] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1268.704214] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1268.704231] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1268.704237] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1268.704249] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1268.704254] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1268.704264] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1268.704269] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1268.704281] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1268.704287] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1268.704313] sd 6:0:0:0: [sdc] Unhandled error code
[ 1268.704320] sd 6:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 1268.704328] sd 6:0:0:0: [sdc] CDB: Read(10): 28 00 32 f1 3a 00 00 04 00 00
[ 1268.704350] end_request: I/O error, dev sdc, sector 854669824
[ 1268.704400] sd 6:0:3:0: [sdf] Unhandled error code
[ 1268.704405] sd 6:0:3:0: [sdf] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 1268.704412] sd 6:0:3:0: [sdf] CDB: Read(10): 28 00 32 f1 3a 00 00 02 00 00
[ 1268.704431] end_request: I/O error, dev sdf, sector 854669824
[ 1268.704460] sd 6:0:3:0: [sdf] Unhandled error code
[ 1268.704464] sd 6:0:3:0: [sdf] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 1268.704471] sd 6:0:3:0: [sdf] CDB: Read(10): 28 00 32 f1 36 00 00 04 00 00
[ 1268.704490] end_request: I/O error, dev sdf, sector 854668800
[ 1268.704526] sd 6:0:1:0: [sdd] Unhandled error code
[ 1268.704530] sd 6:0:1:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 1268.704537] sd 6:0:1:0: [sdd] CDB: Read(10): 28 00 32 f1 3a 00 00 04 00 00
[ 1268.704556] end_request: I/O error, dev sdd, sector 854669824
[ 1268.704594] sd 6:0:4:0: [sdg] Unhandled error code
[ 1268.704598] sd 6:0:4:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 1268.704605] sd 6:0:4:0: [sdg] CDB: Read(10): 28 00 32 f1 38 00 00 04 00 00
[ 1268.704624] end_request: I/O error, dev sdg, sector 854669312
[ 1268.704659] sd 6:0:4:0: [sdg] Unhandled error code
[ 1268.704664] sd 6:0:4:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 1268.704671] sd 6:0:4:0: [sdg] CDB: Read(10): 28 00 32 f1 34 a0 00 03 60 00
[ 1268.704689] end_request: I/O error, dev sdg, sector 854668448
[ 1268.704727] sd 6:0:2:0: [sde] Unhandled error code
[ 1268.704732] sd 6:0:2:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 1268.704740] sd 6:0:2:0: [sde] CDB: Write(10): 2a 00 3a 3d 0e 00 00 02 00 00
[ 1268.704760] end_request: I/O error, dev sde, sector 977079808
[ 1268.704782] sd 6:0:2:0: [sde] Unhandled error code
[ 1268.704787] sd 6:0:2:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 1268.704794] sd 6:0:2:0: [sde] CDB: Read(10): 28 00 32 f1 3a 00 00 02 a0 00
[ 1268.704814] end_request: I/O error, dev sde, sector 854669824
[ 1268.704882] I/O error in filesystem ("md0") meta-data dev md0 block 0x123314a00 ("xlog_iodone") error 5 buf count 262144
[ 1268.704895] xfs_force_shutdown(md0,0x2) called from line 1043 of file fs/xfs/xfs_log.c. Return address = 0xffffffffa0fece9e
[ 1268.704915] Filesystem "md0": Log I/O Error Detected. Shutting down filesystem: md0
[ 1268.704922] Please umount the filesystem, and rectify the problem(s)
[ 1293.238175] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1299.698199] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1299.698209] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1323.238181] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1329.704150] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1329.704159] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1353.238080] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1360.704186] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1360.704196] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1383.238179] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1391.704079] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1391.704088] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1413.239062] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1422.701188] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1422.701198] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1443.240061] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1453.701586] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 1453.701596] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 1453.701619] sd 6:0:4:0: [sdg] Unhandled error code
[ 1453.701626] sd 6:0:4:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 1453.701635] sd 6:0:4:0: [sdg] CDB: Read(10): 28 00 32 f1 34 a0 00 00 08 00
[ 1453.701658] end_request: I/O error, dev sdg, sector 854668448
[ 1473.240912] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1503.243021] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1533.244205] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1563.244081] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1593.244188] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1623.244188] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1653.244202] Filesystem "md0": xfs_log_force: error 5 returned.
[ 1683.244192] Filesystem "md0": xfs_log_force: error 5 returned.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc3-git2 (moose@natasha) (gcc version 4.3.4 (Debian 4.3.4-5) ) #1 SMP PREEMPT Fri Oct 9 10:55:36 MDT 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc3-git2 root=UUID=272a1709-267d-4134-a6b4-e8d3884dca37 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfde0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfde0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfc00000 page 2M
[ 0.000000] 00cfc00000 - 00cfde0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfde0000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ a000-c000
[ 0.000000] RAMDISK: 376bd000 - 37fefe01
[ 0.000000] ACPI: RSDP 00000000000f7550 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfde30c0 0731E (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfde0000 00040
[ 0.000000] ACPI: SSDT 00000000cfdea4c0 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfdead80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfdeadc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 00000000cfdeae00 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cfdea400 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000038fff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000166cc14] TEXT DATA BSS ==> [0001000000 - 000166cc14]
[ 0.000000] #3 [00376bd000 - 0037fefe01] RAMDISK ==> [00376bd000 - 0037fefe01]
[ 0.000000] #4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
[ 0.000000] #5 [000166d000 - 000166d106] BRK ==> [000166d000 - 000166d106]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f5b40] f5b40
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000cfde0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1047933
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3836 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833048 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
[ 0.000000] PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90648 r8192 d24040 u524288
[ 0.000000] pcpu-alloc: s90648 r8192 d24040 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030804
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc3-git2 root=UUID=272a1709-267d-4134-a6b4-e8d3884dca37 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 8d2c000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 4050052k/4980736k available (3107k kernel code, 789004k absent, 141680k reserved, 1712k data, 612k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] alloc irq_desc for 24 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2612.394 MHz processor.
[ 0.003004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.78 BogoMIPS (lpj=2612390)
[ 0.003182] Security Framework initialized
[ 0.003239] SELinux: Disabled at boot.
[ 0.003599] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005072] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005626] Mount-cache hash table entries: 256
[ 0.005788] Initializing cgroup subsys ns
[ 0.005843] Initializing cgroup subsys cpuacct
[ 0.005900] Initializing cgroup subsys devices
[ 0.005955] Initializing cgroup subsys freezer
[ 0.006002] Initializing cgroup subsys net_cls
[ 0.006082] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.006139] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.006195] CPU 0/0x0 -> Node 0
[ 0.006249] tseg: 00cfe00000
[ 0.006250] CPU: Physical Processor ID: 0
[ 0.006304] CPU: Processor Core ID: 0
[ 0.006359] mce: CPU supports 6 MCE banks
[ 0.006420] using C1E aware idle routine
[ 0.006474] Performance Events: AMD PMU driver.
[ 0.006571] ... version: 0
[ 0.006625] ... bit width: 48
[ 0.006679] ... generic registers: 4
[ 0.006733] ... value mask: 0000ffffffffffff
[ 0.006789] ... max period: 00007fffffffffff
[ 0.006844] ... fixed-purpose events: 0
[ 0.006898] ... event mask: 000000000000000f
[ 0.007503] ACPI: Core revision 20090903
[ 0.016064] Setting APIC routing to flat
[ 0.016604] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.026939] CPU0: AMD Phenom(tm) II X4 810 Processor stepping 02
[ 0.027995] System has AMD C1E enabled
[ 0.027995] Switch to broadcast mode on CPU0
[ 0.028013] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003999] Initializing CPU#1
[ 0.003999] Calibrating delay using timer specific routine.. 5223.74 BogoMIPS (lpj=2611871)
[ 0.003999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003999] CPU 1/0x1 -> Node 0
[ 0.003999] CPU: Physical Processor ID: 0
[ 0.003999] CPU: Processor Core ID: 1
[ 0.003999] mce: CPU supports 6 MCE banks
[ 0.099082] CPU1: AMD Phenom(tm) II X4 810 Processor stepping 02
[ 0.099660] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.100003] Switch to broadcast mode on CPU1
[ 0.102997] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.003999] Initializing CPU#2
[ 0.003999] Calibrating delay using timer specific routine.. 5223.78 BogoMIPS (lpj=2611892)
[ 0.003999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003999] CPU 2/0x2 -> Node 0
[ 0.003999] CPU: Physical Processor ID: 0
[ 0.003999] CPU: Processor Core ID: 2
[ 0.003999] mce: CPU supports 6 MCE banks
[ 0.174070] CPU2: AMD Phenom(tm) II X4 810 Processor stepping 02
[ 0.174648] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.174992] Switch to broadcast mode on CPU2
[ 0.178013] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.003999] Initializing CPU#3
[ 0.003999] Calibrating delay using timer specific routine.. 5223.75 BogoMIPS (lpj=2611878)
[ 0.003999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003999] CPU 3/0x3 -> Node 0
[ 0.003999] CPU: Physical Processor ID: 0
[ 0.003999] CPU: Processor Core ID: 3
[ 0.003999] mce: CPU supports 6 MCE banks
[ 0.249005] CPU3: AMD Phenom(tm) II X4 810 Processor stepping 02
[ 0.249586] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.249995] Brought up 4 CPUs
[ 0.249993] Switch to broadcast mode on CPU3
[ 0.250102] Total of 4 processors activated (20896.06 BogoMIPS).
[ 0.251973] CPU0 attaching sched-domain:
[ 0.251975] domain 0: span 0-3 level MC
[ 0.251977] groups: 0 1 2 3
[ 0.251983] CPU1 attaching sched-domain:
[ 0.251984] domain 0: span 0-3 level MC
[ 0.251986] groups: 1 2 3 0
[ 0.251991] CPU2 attaching sched-domain:
[ 0.251992] domain 0: span 0-3 level MC
[ 0.251994] groups: 2 3 0 1
[ 0.251998] CPU3 attaching sched-domain:
[ 0.251999] domain 0: span 0-3 level MC
[ 0.252001] groups: 3 0 1 2
[ 0.256022] devtmpfs: initialized
[ 0.256423] regulator: core version 0.5
[ 0.256552] NET: Registered protocol family 16
[ 0.256837] node 0 link 0: io port [a000, ffff]
[ 0.256840] TOM: 00000000d0000000 aka 3328M
[ 0.256963] Fam 10h mmconf [e0000000, e00fffff]
[ 0.256965] node 0 link 0: mmio [a0000, bffff]
[ 0.256968] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.256970] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.256972] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
[ 0.256976] TOM2: 0000000130000000 aka 4864M
[ 0.257031] bus: [00,05] on node 0 link 0
[ 0.257033] bus: 00 index 0 io port: [0, ffff]
[ 0.257035] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.257037] bus: 00 index 2 mmio: [d0000000, dfffffff]
[ 0.257038] bus: 00 index 3 mmio: [e0600000, ffffffff]
[ 0.257040] bus: 00 index 4 mmio: [e0100000, e05fffff]
[ 0.257042] bus: 00 index 5 mmio: [130000000, fcffffffff]
[ 0.257052] ACPI: bus type pci registered
[ 0.257208] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.257266] PCI: MCFG area at e0000000 reserved in E820
[ 0.263709] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.263765] PCI: Using configuration type 1 for base access
[ 0.269062] bio: create slab <bio-0> at 0
[ 0.273448] ACPI: EC: Look up EC in DSDT
[ 0.281278] ACPI: Interpreter enabled
[ 0.281335] ACPI: (supports S0 S3 S4 S5)
[ 0.281574] ACPI: Using IOAPIC for interrupt routing
[ 0.287154] ACPI: No dock devices found.
[ 0.287305] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.288003] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.288021] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.288079] pci 0000:00:02.0: PME# disabled
[ 0.288165] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.288222] pci 0000:00:07.0: PME# disabled
[ 0.288304] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.288362] pci 0000:00:09.0: PME# disabled
[ 0.288444] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.288500] pci 0000:00:0b.0: PME# disabled
[ 0.288598] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
[ 0.288604] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.288610] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.288616] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.288622] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.288629] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
[ 0.288677] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
[ 0.298982] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.311996] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
[ 0.312056] pci 0000:00:12.2: supports D1 D2
[ 0.312058] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.312116] pci 0000:00:12.2: PME# disabled
[ 0.312199] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.325027] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[ 0.338043] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
[ 0.338104] pci 0000:00:13.2: supports D1 D2
[ 0.338105] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.338164] pci 0000:00:13.2: PME# disabled
[ 0.338324] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.338330] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.338336] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.338342] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.338349] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f]
[ 0.338409] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
[ 0.338449] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.338507] pci 0000:00:14.2: PME# disabled
[ 0.338658] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff]
[ 0.350105] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.350113] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.350121] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.350125] pci 0000:01:00.0: reg 24 io port: [0xcf00-0xcf7f]
[ 0.350130] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.350195] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.350197] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.350201] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.350232] pci 0000:02:00.0: reg 10 io port: [0xbe00-0xbeff]
[ 0.350245] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdbff000-0xfdbfffff]
[ 0.350255] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdbf8000-0xfdbfbfff]
[ 0.350261] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.350288] pci 0000:02:00.0: supports D1 D2
[ 0.350289] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.350348] pci 0000:02:00.0: PME# disabled
[ 0.350456] pci 0000:00:07.0: bridge io port: [0xb000-0xbfff]
[ 0.350458] pci 0000:00:07.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.350462] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.350493] pci 0000:03:00.0: reg 10 io port: [0xee00-0xeeff]
[ 0.350507] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff]
[ 0.350517] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xfdff8000-0xfdffbfff]
[ 0.350522] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.350549] pci 0000:03:00.0: supports D1 D2
[ 0.350550] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.350609] pci 0000:03:00.0: PME# disabled
[ 0.350717] pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
[ 0.350719] pci 0000:00:09.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.350722] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.350757] pci 0000:04:00.0: reg 18 io port: [0xdf00-0xdf7f]
[ 0.350769] pci 0000:04:00.0: reg 20 64bit mmio: [0xfdef0000-0xfdefffff]
[ 0.350774] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 0.350795] pci 0000:04:00.0: supports D1
[ 0.350797] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[ 0.350854] pci 0000:04:00.0: PME# disabled
[ 0.351047] pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff]
[ 0.351050] pci 0000:00:0b.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.351053] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.351116] pci 0000:05:0e.0: reg 10 32bit mmio: [0xfdaff000-0xfdaff7ff]
[ 0.351125] pci 0000:05:0e.0: reg 14 32bit mmio: [0xfdaf8000-0xfdafbfff]
[ 0.351179] pci 0000:05:0e.0: supports D1 D2
[ 0.351181] pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.351240] pci 0000:05:0e.0: PME# disabled
[ 0.351326] pci 0000:00:14.4: transparent bridge
[ 0.351383] pci 0000:00:14.4: bridge io port: [0xa000-0xafff]
[ 0.351387] pci 0000:00:14.4: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.351391] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.351406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.351678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.351759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.351817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.351867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.351918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT]
[ 0.377315] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.377359] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.377958] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.378559] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.379183] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.379782] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.380388] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.381019] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.382562] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.382562] vgaarb: loaded
[ 0.382562] usbcore: registered new interface driver usbfs
[ 0.383014] usbcore: registered new interface driver hub
[ 0.383073] usbcore: registered new device driver usb
[ 0.383076] PCI: Using ACPI for IRQ routing
[ 0.383076] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.383131] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.383283] PCI-DMA: Disabling AGP.
[ 0.384011] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.384058] PCI-DMA: using GART IOMMU.
[ 0.384114] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.384979] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.384979] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.387043] hpet: hpet2 irq 24 for MSI
[ 0.390009] Switching to clocksource tsc
[ 0.391077] pnp: PnP ACPI init
[ 0.391144] ACPI: bus type pnp registered
[ 0.394071] pnp 00:0d: mem resource (0xd6c00-0xd7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.394141] pnp 00:0d: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.394210] pnp 00:0d: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.394279] pnp 00:0d: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.394348] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.394416] pnp 00:0d: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.394611] pnp: PnP ACPI: found 14 devices
[ 0.394666] ACPI: ACPI bus type pnp unregistered
[ 0.394727] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.394799] system 00:01: ioport range 0x220-0x225 has been reserved
[ 0.394856] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.394915] system 00:02: ioport range 0x4100-0x411f has been reserved
[ 0.394972] system 00:02: ioport range 0x228-0x22f has been reserved
[ 0.395029] system 00:02: ioport range 0x40b-0x40b has been reserved
[ 0.395086] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 0.395143] system 00:02: ioport range 0xc00-0xc01 has been reserved
[ 0.395200] system 00:02: ioport range 0xc14-0xc14 has been reserved
[ 0.395257] system 00:02: ioport range 0xc50-0xc52 has been reserved
[ 0.395314] system 00:02: ioport range 0xc6c-0xc6d has been reserved
[ 0.395371] system 00:02: ioport range 0xc6f-0xc6f has been reserved
[ 0.395427] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
[ 0.395484] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
[ 0.395541] system 00:02: ioport range 0xcd4-0xcdf has been reserved
[ 0.395598] system 00:02: ioport range 0x4000-0x40fe has been reserved
[ 0.395655] system 00:02: ioport range 0x4210-0x4217 has been reserved
[ 0.395712] system 00:02: ioport range 0xb00-0xb0f has been reserved
[ 0.395779] system 00:02: ioport range 0xb10-0xb1f has been reserved
[ 0.395836] system 00:02: ioport range 0xb20-0xb3f has been reserved
[ 0.395900] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.395961] system 00:0d: iomem range 0xcfde0000-0xcfdfffff could not be reserved
[ 0.396027] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.396085] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.396152] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.396209] system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.401318] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.401375] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.401432] pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff
[ 0.401489] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.401557] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02
[ 0.401614] pci 0000:00:07.0: IO window: 0xb000-0xbfff
[ 0.401670] pci 0000:00:07.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.401735] pci 0000:00:07.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.401805] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.401862] pci 0000:00:09.0: IO window: 0xe000-0xefff
[ 0.401918] pci 0000:00:09.0: MEM window: 0xfd800000-0xfd8fffff
[ 0.401975] pci 0000:00:09.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.402043] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
[ 0.402099] pci 0000:00:0b.0: IO window: 0xd000-0xdfff
[ 0.402156] pci 0000:00:0b.0: MEM window: 0xfde00000-0xfdefffff
[ 0.402212] pci 0000:00:0b.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.402280] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.402337] pci 0000:00:14.4: IO window: 0xa000-0xafff
[ 0.402395] pci 0000:00:14.4: MEM window: 0xfda00000-0xfdafffff
[ 0.402454] pci 0000:00:14.4: PREFETCH window: 0xfd900000-0xfd9fffff
[ 0.402517] alloc irq_desc for 18 on node 0
[ 0.402518] alloc kstat_irqs on node 0
[ 0.402527] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.402585] pci 0000:00:02.0: setting latency timer to 64
[ 0.402590] alloc irq_desc for 19 on node 0
[ 0.402591] alloc kstat_irqs on node 0
[ 0.402598] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.402655] pci 0000:00:07.0: setting latency timer to 64
[ 0.402660] alloc irq_desc for 17 on node 0
[ 0.402661] alloc kstat_irqs on node 0
[ 0.402668] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.402726] pci 0000:00:09.0: setting latency timer to 64
[ 0.402749] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.402807] pci 0000:00:0b.0: setting latency timer to 64
[ 0.402814] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.402816] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.402818] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.402820] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.402822] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.402824] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.402826] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.402828] pci_bus 0000:02: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.402830] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.402832] pci_bus 0000:03: resource 1 mem: [0xfd800000-0xfd8fffff]
[ 0.402834] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.402836] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.402837] pci_bus 0000:04: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.402839] pci_bus 0000:04: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.402841] pci_bus 0000:05: resource 0 io: [0xa000-0xafff]
[ 0.402843] pci_bus 0000:05: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.402845] pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.402847] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.402849] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.402914] NET: Registered protocol family 2
[ 0.403124] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.404221] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.406453] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.406794] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.406852] TCP reno registered
[ 0.407020] NET: Registered protocol family 1
[ 0.407123] Trying to unpack rootfs image as initramfs...
[ 0.570521] Freeing initrd memory: 9419k freed
[ 0.574288] audit: initializing netlink socket (disabled)
[ 0.574355] type=2000 audit(1255108530.573:1): initialized
[ 0.574658] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.574934] VFS: Disk quotas dquot_6.5.2
[ 0.575017] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.575125] msgmni has been set to 7928
[ 0.575378] alg: No test for stdrng (krng)
[ 0.575483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.575550] io scheduler noop registered
[ 0.579883] io scheduler anticipatory registered
[ 0.579937] io scheduler deadline registered
[ 0.580010] io scheduler cfq registered (default)
[ 0.580107] pci 0000:01:00.0: Boot video device
[ 0.580265] alloc irq_desc for 25 on node 0
[ 0.580267] alloc kstat_irqs on node 0
[ 0.580275] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.580280] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.580412] alloc irq_desc for 26 on node 0
[ 0.580414] alloc kstat_irqs on node 0
[ 0.580418] pcieport-driver 0000:00:07.0: irq 26 for MSI/MSI-X
[ 0.580422] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 0.580536] alloc irq_desc for 27 on node 0
[ 0.580537] alloc kstat_irqs on node 0
[ 0.580542] pcieport-driver 0000:00:09.0: irq 27 for MSI/MSI-X
[ 0.580546] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.580660] alloc irq_desc for 28 on node 0
[ 0.580662] alloc kstat_irqs on node 0
[ 0.580666] pcieport-driver 0000:00:0b.0: irq 28 for MSI/MSI-X
[ 0.580670] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 0.583608] Linux agpgart interface v0.103
[ 0.583664] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.583841] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.584272] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.585921] brd: module loaded
[ 0.586033] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.586244] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.586300] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.586452] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.586717] mice: PS/2 mouse device common for all mice
[ 0.586802] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 0.586879] rtc_cmos 00:05: RTC can wake from S4
[ 0.586976] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.587062] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.587142] cpuidle: using governor ladder
[ 0.587197] cpuidle: using governor menu
[ 0.587255] No iBFT detected.
[ 0.587592] TCP cubic registered
[ 0.587710] NET: Registered protocol family 10
[ 0.588153] lo: Disabled Privacy Extensions
[ 0.588449] Mobile IPv6
[ 0.588503] NET: Registered protocol family 17
[ 0.588677] registered taskstats version 1
[ 0.589099] rtc_cmos 00:05: setting system clock to 2009-10-09 17:15:31 UTC (1255108531)
[ 0.589205] Freeing unused kernel memory: 612k freed
[ 0.589407] Write protecting the kernel read-only data: 4224k
[ 0.596152] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.683893] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.683979] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.684079] r8169 0000:02:00.0: setting latency timer to 64
[ 0.684110] alloc irq_desc for 29 on node 0
[ 0.684113] alloc kstat_irqs on node 0
[ 0.684125] r8169 0000:02:00.0: irq 29 for MSI/MSI-X
[ 0.684613] eth0: RTL8168d/8111d at 0xffffc90000666000, 00:24:1d:18:f8:b2, XID 081000c0 IRQ 29
[ 0.702070] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.702833] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.702906] ACPI: Power Button [PWRB]
[ 0.703025] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.703093] ACPI: Power Button [PWRF]
[ 0.709712] Uniform Multi-Platform E-IDE driver
[ 0.710809] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.710899] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.711022] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.711114] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.711192] ehci_hcd 0000:00:12.2: debug port 1
[ 0.711273] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 0.713114] SCSI subsystem initialized
[ 0.716694] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.716774] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.716832] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.716899] usb usb1: Product: EHCI Host Controller
[ 0.716955] usb usb1: Manufacturer: Linux 2.6.32-rc3-git2 ehci_hcd
[ 0.717012] usb usb1: SerialNumber: 0000:00:12.2
[ 0.717131] usb usb1: configuration #1 chosen from 1 choice
[ 0.717210] hub 1-0:1.0: USB hub found
[ 0.717271] hub 1-0:1.0: 6 ports detected
[ 0.723713] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.723806] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.723918] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.724007] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.724084] ehci_hcd 0000:00:13.2: debug port 1
[ 0.724165] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 0.724648] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.727698] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.727772] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.727865] r8169 0000:03:00.0: setting latency timer to 64
[ 0.727897] alloc irq_desc for 30 on node 0
[ 0.727899] alloc kstat_irqs on node 0
[ 0.727910] r8169 0000:03:00.0: irq 30 for MSI/MSI-X
[ 0.728419] eth1: RTL8168d/8111d at 0xffffc9000064e000, 00:24:1d:18:f8:f3, XID 081000c0 IRQ 30
[ 0.732172] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.732246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.732303] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.732369] usb usb2: Product: EHCI Host Controller
[ 0.732424] usb usb2: Manufacturer: Linux 2.6.32-rc3-git2 ehci_hcd
[ 0.732480] usb usb2: SerialNumber: 0000:00:13.2
[ 0.732595] usb usb2: configuration #1 chosen from 1 choice
[ 0.732679] hub 2-0:1.0: USB hub found
[ 0.732739] hub 2-0:1.0: 6 ports detected
[ 0.732870] alloc irq_desc for 22 on node 0
[ 0.732872] alloc kstat_irqs on node 0
[ 0.732881] firewire_ohci 0000:05:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.733799] alloc irq_desc for 16 on node 0
[ 0.733801] alloc kstat_irqs on node 0
[ 0.733810] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.733881] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.733976] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.734077] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 0.736418] libata version 3.00 loaded.
[ 0.737284] Floppy drive(s): fd0 is 1.44M
[ 0.742671] mvsas 0000:04:00.0: mvsas: driver version 0.8.2
[ 0.742737] mvsas 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.742797] mvsas 0000:04:00.0: setting latency timer to 64
[ 0.744063] mvsas 0000:04:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 0.751650] FDC 0 is a post-1991 82077
[ 0.788794] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.788853] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.788919] usb usb3: Product: OHCI Host Controller
[ 0.788974] usb usb3: Manufacturer: Linux 2.6.32-rc3-git2 ohci_hcd
[ 0.789030] usb usb3: SerialNumber: 0000:00:12.0
[ 0.789153] usb usb3: configuration #1 chosen from 1 choice
[ 0.789231] hub 3-0:1.0: USB hub found
[ 0.789292] hub 3-0:1.0: 3 ports detected
[ 0.789473] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
[ 0.789538] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.789618] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
[ 0.789684] ide0: BM-DMA at 0xfa00-0xfa07
[ 0.789752] atiixp 0000:00:14.1: simplex device: DMA disabled
[ 0.789808] ide1: DMA disabled
[ 0.789870] Probing IDE interface ide0...
[ 0.791660] firewire_ohci: Added fw-ohci device 0000:05:0e.0, OHCI version 1.10
[ 1.217122] usb 3-3: new low speed USB device using ohci_hcd and address 2
[ 1.292081] firewire_core: created device fw0: GUID 001a9c2c0000241d, S400
[ 1.313134] Probing IDE interface ide1...
[ 1.316143] ide1: no devices on the port
[ 1.316269] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.316414] ide1 at 0x170-0x177,0x376 on irq 15
[ 1.317261] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.317346] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.317461] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.317547] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.367804] usb 3-3: New USB device found, idVendor=046d, idProduct=c01d
[ 1.367863] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.367921] usb 3-3: Product: USB-PS/2 Optical Mouse
[ 1.367976] usb 3-3: Manufacturer: Logitech
[ 1.368141] usb 3-3: configuration #1 chosen from 1 choice
[ 1.372068] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.372126] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.372191] usb usb4: Product: OHCI Host Controller
[ 1.372246] usb usb4: Manufacturer: Linux 2.6.32-rc3-git2 ohci_hcd
[ 1.372303] usb usb4: SerialNumber: 0000:00:12.1
[ 1.372433] usb usb4: configuration #1 chosen from 1 choice
[ 1.372526] hub 4-0:1.0: USB hub found
[ 1.372587] hub 4-0:1.0: 3 ports detected
[ 1.372784] ahci 0000:00:11.0: version 3.0
[ 1.372793] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.372960] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.373037] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.373407] scsi1 : ahci
[ 1.373592] scsi2 : ahci
[ 1.373704] scsi3 : ahci
[ 1.373814] scsi4 : ahci
[ 1.373922] scsi5 : ahci
[ 1.374047] scsi6 : ahci
[ 1.374219] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed
[ 1.374277] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.374344] ata3: SATA max UDMA/133 irq_stat 0x00000040, connection status changed
[ 1.374419] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.374485] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[ 1.374552] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[ 1.375310] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.375382] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.375500] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.375596] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.430140] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.430198] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.430266] usb usb5: Product: OHCI Host Controller
[ 1.430325] usb usb5: Manufacturer: Linux 2.6.32-rc3-git2 ohci_hcd
[ 1.430381] usb usb5: SerialNumber: 0000:00:13.0
[ 1.430506] usb usb5: configuration #1 chosen from 1 choice
[ 1.430598] hub 5-0:1.0: USB hub found
[ 1.434963] hub 5-0:1.0: 3 ports detected
[ 1.436109] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.436177] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.436281] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.436361] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.491149] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.491209] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.491275] usb usb6: Product: OHCI Host Controller
[ 1.491330] usb usb6: Manufacturer: Linux 2.6.32-rc3-git2 ohci_hcd
[ 1.491387] usb usb6: SerialNumber: 0000:00:13.1
[ 1.491505] usb usb6: configuration #1 chosen from 1 choice
[ 1.491596] hub 6-0:1.0: USB hub found
[ 1.491656] hub 6-0:1.0: 3 ports detected
[ 1.492122] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.492195] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.492298] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.492379] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.547140] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.547199] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.547264] usb usb7: Product: OHCI Host Controller
[ 1.547319] usb usb7: Manufacturer: Linux 2.6.32-rc3-git2 ohci_hcd
[ 1.547376] usb usb7: SerialNumber: 0000:00:14.5
[ 1.547497] usb usb7: configuration #1 chosen from 1 choice
[ 1.547588] hub 7-0:1.0: USB hub found
[ 1.547648] hub 7-0:1.0: 2 ports detected
[ 1.679158] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.681129] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.682123] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.832088] ata2: softreset failed (device not ready)
[ 1.832145] ata2: applying SB600 PMP SRST workaround and retrying
[ 1.985133] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.012374] ata2.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 2.012436] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.052206] ata2.00: configured for UDMA/133
[ 2.251101] ata3: softreset failed (device not ready)
[ 2.251108] ata1: softreset failed (device not ready)
[ 2.251111] ata1: applying SB600 PMP SRST workaround and retrying
[ 2.251281] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.404124] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.404127] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.404834] ata1.00: ATA-7: OCZ-VERTEX v1.10, 1370, max UDMA/133
[ 2.404893] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.405345] ata3.00: ATAPI: PIONEER DVD-RW DVR-212D, 1.21, max UDMA/66
[ 2.405416] ata1.00: configured for UDMA/133
[ 2.407111] ata3.00: configured for UDMA/66
[ 2.416181] scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX v1.10 1370 PQ: 0 ANSI: 5
[ 2.416421] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 2.423933] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-212D 1.21 PQ: 0 ANSI: 5
[ 2.428100] sd 1:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.428152] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.428183] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.428185] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.428200] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.428324] sdb:
[ 2.428436] sd 1:0:0:0: [sda] Write Protect is off
[ 2.428541] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.428557] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.428724] sda: sda2
[ 2.429324] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.438431] sdb1 sdb2 sdb3 sdb4
[ 2.464934] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.467052] usbcore: registered new interface driver hiddev
[ 2.473792] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input4
[ 2.473912] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-3/input0
[ 2.473999] usbcore: registered new interface driver usbhid
[ 2.474059] usbhid: v2.6:USB HID core driver
[ 2.487186] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.487244] Uniform CD-ROM driver Revision: 3.20
[ 2.487452] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.490172] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.490280] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.490361] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 5.124153] drivers/scsi/mvsas/mv_sas.c 1214:port 0 attach dev info is 0
[ 5.124156] drivers/scsi/mvsas/mv_sas.c 1216:port 0 attach sas addr is 0
[ 5.325142] drivers/scsi/mvsas/mv_sas.c 1214:port 1 attach dev info is 0
[ 5.325145] drivers/scsi/mvsas/mv_sas.c 1216:port 1 attach sas addr is 1
[ 5.526132] drivers/scsi/mvsas/mv_sas.c 1214:port 2 attach dev info is 2000000
[ 5.526134] drivers/scsi/mvsas/mv_sas.c 1216:port 2 attach sas addr is 2
[ 5.727131] drivers/scsi/mvsas/mv_sas.c 1214:port 3 attach dev info is 2000000
[ 5.727133] drivers/scsi/mvsas/mv_sas.c 1216:port 3 attach sas addr is 3
[ 5.828106] drivers/scsi/mvsas/mv_sas.c 1214:port 4 attach dev info is 0
[ 5.828108] drivers/scsi/mvsas/mv_sas.c 1216:port 4 attach sas addr is 0
[ 5.929109] drivers/scsi/mvsas/mv_sas.c 1214:port 5 attach dev info is 0
[ 5.929111] drivers/scsi/mvsas/mv_sas.c 1216:port 5 attach sas addr is 0
[ 6.030102] drivers/scsi/mvsas/mv_sas.c 1214:port 6 attach dev info is 0
[ 6.030104] drivers/scsi/mvsas/mv_sas.c 1216:port 6 attach sas addr is 0
[ 6.231112] drivers/scsi/mvsas/mv_sas.c 1214:port 7 attach dev info is 0
[ 6.231114] drivers/scsi/mvsas/mv_sas.c 1216:port 7 attach sas addr is 7
[ 6.231119] scsi0 : mvsas
[ 6.231530] drivers/scsi/mvsas/mv_sas.c 380:phy 0 byte dmaded.
[ 6.231533] drivers/scsi/mvsas/mv_sas.c 380:phy 1 byte dmaded.
[ 6.231536] drivers/scsi/mvsas/mv_sas.c 380:phy 2 byte dmaded.
[ 6.231538] drivers/scsi/mvsas/mv_sas.c 380:phy 3 byte dmaded.
[ 6.231540] drivers/scsi/mvsas/mv_sas.c 380:phy 7 byte dmaded.
[ 6.232850] drivers/scsi/mvsas/mv_sas.c 1365:found dev[0:5] is gone.
[ 6.260393] ata7.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 6.260452] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.284789] device-mapper: uevent: version 1.0.3
[ 6.284951] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 6.300081] ata7.00: configured for UDMA/133
[ 6.300109] kjournald starting. Commit interval 5 seconds
[ 6.300121] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.300287] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 6.301316] drivers/scsi/mvsas/mv_sas.c 1365:found dev[1:5] is gone.
[ 6.302775] ata8.00: ATA-8: ST31000523AS, CC35, max UDMA/133
[ 6.302841] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.304161] ata8.00: configured for UDMA/133
[ 6.304251] scsi 0:0:1:0: Direct-Access ATA ST31000523AS CC35 PQ: 0 ANSI: 5
[ 6.306722] drivers/scsi/mvsas/mv_sas.c 1365:found dev[2:5] is gone.
[ 6.333837] ata9.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 6.333896] ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.373625] ata9.00: configured for UDMA/133
[ 6.373717] scsi 0:0:2:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 6.374786] drivers/scsi/mvsas/mv_sas.c 1365:found dev[3:5] is gone.
[ 6.401912] ata10.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 6.401971] ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.441462] ata10.00: configured for UDMA/133
[ 6.441562] scsi 0:0:3:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 6.442681] drivers/scsi/mvsas/mv_sas.c 1365:found dev[4:5] is gone.
[ 6.459715] udev: starting version 146
[ 6.469810] ata11.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 6.469868] ata11.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.486720] processor LNXCPU:00: registered as cooling_device0
[ 6.486824] processor LNXCPU:01: registered as cooling_device1
[ 6.486910] processor LNXCPU:02: registered as cooling_device2
[ 6.486995] processor LNXCPU:03: registered as cooling_device3
[ 6.497868] parport_pc 00:0a: reported by Plug and Play ACPI
[ 6.497981] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.509334] ata11.00: configured for UDMA/133
[ 6.509461] scsi 0:0:4:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 6.534342] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.539646] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[ 6.539718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.542188] EDAC MC: Ver: 2.1.0 Oct 9 2009
[ 6.551565] EDAC amd64_edac: Ver: 3.2.0 Oct 9 2009
[ 6.552590] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 6.552671] EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
[ 6.552673] Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
[ 6.552674] Also, use of the override can cause unknown side effects.
[ 6.552879] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 6.610870] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.649906] hda_codec: ALC889A: BIOS auto-probing.
[ 6.651400] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 6.864370] Adding 8385920k swap on /dev/sdb4. Priority:-1 extents:1 across:8385920k
[ 6.889282] EXT3 FS on sda2, internal journal
[ 6.908799] loop: module loaded
[ 6.920222] it87: Found IT8720F chip at 0x228, revision 5
[ 6.920297] it87: in3 is VCC (+5V)
[ 7.233160] sd 0:0:0:0: Attached scsi generic sg3 type 0
[ 7.233331] sd 0:0:1:0: Attached scsi generic sg4 type 0
[ 7.233337] sd 0:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 7.233365] sd 0:0:0:0: [sdc] Write Protect is off
[ 7.233368] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 7.233382] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.233495] sd 0:0:1:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 7.233510] sdc:
[ 7.233538] sd 0:0:1:0: [sdd] Write Protect is off
[ 7.233540] sd 0:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 7.233554] sd 0:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.233667] sdd:
[ 7.238431] sd 0:0:2:0: Attached scsi generic sg5 type 0
[ 7.238638] sd 0:0:2:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 7.238758] sd 0:0:2:0: [sde] Write Protect is off
[ 7.238820] sd 0:0:2:0: [sde] Mode Sense: 00 3a 00 00
[ 7.238836] sd 0:0:2:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.238993] sde:
[ 7.239144] sd 0:0:3:0: Attached scsi generic sg6 type 0
[ 7.239478] sd 0:0:4:0: Attached scsi generic sg7 type 0
[ 7.239890] sd 0:0:3:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 7.239986] sd 0:0:3:0: [sdf] Write Protect is off
[ 7.240045] sd 0:0:3:0: [sdf] Mode Sense: 00 3a 00 00
[ 7.240061] sd 0:0:3:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.240230] sdf:
[ 7.240316] sd 0:0:4:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 7.240458] sd 0:0:4:0: [sdg] Write Protect is off
[ 7.240514] sd 0:0:4:0: [sdg] Mode Sense: 00 3a 00 00
[ 7.240528] sd 0:0:4:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.241170] sdg: unknown partition table
[ 7.247573] sd 0:0:0:0: [sdc] Attached SCSI disk
[ 7.249636] unknown partition table
[ 7.249929] sd 0:0:1:0: [sdd] Attached SCSI disk
[ 7.250842] unknown partition table
[ 7.251435] unknown partition table
[ 7.251457] sd 0:0:2:0: [sde] Attached SCSI disk
[ 7.252071] sd 0:0:4:0: [sdg] Attached SCSI disk
[ 7.252522] unknown partition table
[ 7.252810] sd 0:0:3:0: [sdf] Attached SCSI disk
[ 7.257043] kjournald starting. Commit interval 5 seconds
[ 7.257536] EXT3 FS on sdb3, internal journal
[ 7.257639] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.486947] Bridge firewalling registered
[ 7.489667] device eth0 entered promiscuous mode
[ 7.491909] r8169: eth0: link down
[ 7.491972] r8169: eth0: link down
[ 7.492464] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.485017] br0: no IPv6 routers present
[ 78.172371] RPC: Registered udp transport module.
[ 78.172441] RPC: Registered tcp transport module.
[ 78.172496] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 78.183319] Slow work thread pool: Starting up
[ 78.183433] Slow work thread pool: Ready
[ 78.183513] FS-Cache: Loaded
[ 78.201219] FS-Cache: Netfs 'nfs' registered for caching
[ 78.213988] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 78.554225] kvm: Nested Virtualization enabled
[ 78.554281] kvm: Nested Paging enabled
[ 78.592703] powernow-k8: Found 1 AMD Phenom(tm) II X4 810 Processor processors (4 cpu cores) (version 2.20.00)
[ 78.592741] powernow-k8: 0 : pstate 0 (2600 MHz)
[ 78.592743] powernow-k8: 1 : pstate 1 (1900 MHz)
[ 78.592745] powernow-k8: 2 : pstate 2 (1400 MHz)
[ 78.592746] powernow-k8: 3 : pstate 3 (800 MHz)
[ 82.103590] process `upsagentd' is using obsolete setsockopt SO_BSDCOMPAT
[ 82.475158] lo: Disabled Privacy Extensions
[ 92.987633] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 121.264073] device eth0 left promiscuous mode
[ 121.264083] br0: port 1(eth0) entering disabled state
[ 121.413369] device eth0 entered promiscuous mode
[ 121.414370] r8169: eth0: link down
[ 121.414808] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 131.674052] br0: no IPv6 routers present
[ 192.256720] device eth0 left promiscuous mode
[ 192.256731] br0: port 1(eth0) entering disabled state
[ 192.455432] device eth0 entered promiscuous mode
[ 192.458515] r8169: eth0: link down
[ 192.459894] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 202.761139] br0: no IPv6 routers present
[ 220.690305] CE: hpet increasing min_delta_ns to 15000 nsec
[ 286.341818] device eth0 left promiscuous mode
[ 286.341830] br0: port 1(eth0) entering disabled state
[ 286.511184] device eth0 entered promiscuous mode
[ 286.512254] r8169: eth0: link down
[ 286.512702] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 296.613530] br0: no IPv6 routers present
[ 338.939342] device eth0 left promiscuous mode
[ 338.939348] br0: port 1(eth0) entering disabled state
[ 339.130661] device eth1 entered promiscuous mode
[ 339.134564] r8169: eth1: link down
[ 339.134572] r8169: eth1: link down
[ 339.135013] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 349.482281] br0: no IPv6 routers present
[ 388.155110] device eth1 left promiscuous mode
[ 388.155121] br0: port 1(eth1) entering disabled state
[ 410.211499] device eth1 entered promiscuous mode
[ 410.215368] r8169: eth1: link down
[ 410.216852] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 420.879170] br0: no IPv6 routers present
[ 434.448677] device eth1 left promiscuous mode
[ 434.448688] br0: port 1(eth1) entering disabled state
[ 451.676874] device eth0 entered promiscuous mode
[ 451.677994] r8169: eth0: link up
[ 451.678004] r8169: eth0: link up
[ 451.683438] br0: port 1(eth0) entering learning state
[ 462.264154] br0: no IPv6 routers present
[ 462.655175] eth0: no IPv6 routers present
[ 466.683163] br0: port 1(eth0) entering forwarding state
[ 472.254038] svc: failed to register lockdv1 RPC service (errno 97).
[ 693.557737] md: nonpersistent superblock ...
[ 693.557748] md: bind<sdc>
[ 693.557798] md: nonpersistent superblock ...
[ 693.557805] md: bind<sdd>
[ 693.557899] md: nonpersistent superblock ...
[ 693.557906] md: bind<sde>
[ 693.557952] md: nonpersistent superblock ...
[ 693.557958] md: bind<sdf>
[ 693.557997] md: nonpersistent superblock ...
[ 693.558003] md: bind<sdg>
[ 693.563692] md: raid0 personality registered for level 0
[ 693.564013] raid0: looking at sdg
[ 693.564022] raid0: comparing sdg(1953524736)
[ 693.564027] with sdg(1953524736)
[ 693.564032] raid0: END
[ 693.564035] raid0: ==> UNIQUE
[ 693.564039] raid0: 1 zones
[ 693.564044] raid0: looking at sdf
[ 693.564048] raid0: comparing sdf(1953524736)
[ 693.564053] with sdg(1953524736)
[ 693.564056] raid0: EQUAL
[ 693.564060] raid0: looking at sde
[ 693.564064] raid0: comparing sde(1953524736)
[ 693.564068] with sdg(1953524736)
[ 693.564072] raid0: EQUAL
[ 693.564075] raid0: looking at sdd
[ 693.564079] raid0: comparing sdd(1953524736)
[ 693.564083] with sdg(1953524736)
[ 693.564087] raid0: EQUAL
[ 693.564090] raid0: looking at sdc
[ 693.564094] raid0: comparing sdc(1953524736)
[ 693.564099] with sdg(1953524736)
[ 693.564102] raid0: EQUAL
[ 693.564106] raid0: FINAL 1 zones
[ 693.564113] raid0: done.
[ 693.564117] raid0 : md_size is 9767623680 sectors.
[ 693.564122] ******* md0 configuration *********
[ 693.564126] zone0=[sdc/sdd/sde/sdf/sdg/]
[ 693.564140] zone offset=0kb device offset=0kb size=4883811840kb
[ 693.564144] **********************************
[ 693.564147]
[ 693.564178] md0: detected capacity change from 0 to 5001023324160
[ 693.568346] md0: unknown partition table
[ 700.335997] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 700.346528] SGI XFS Quota Management subsystem
[ 700.347214] Filesystem "md0": Disabling barriers, trial barrier write failed
[ 700.347647] XFS mounting filesystem md0
[ 730.695553] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 730.695562] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 730.695579] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 730.695585] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 730.695593] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 730.695599] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 730.695607] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 730.695612] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 730.695620] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 730.695625] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 761.695183] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 761.695193] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 761.695210] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 761.695216] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 761.695225] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 761.695231] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 761.695240] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 761.695245] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 761.695261] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 761.695267] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 792.695233] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 792.695243] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 792.695260] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 792.695266] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 792.695274] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 792.695279] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 792.695287] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 792.695292] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 792.695300] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 792.695305] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 823.695392] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 823.695395] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 823.695402] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 823.695404] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 823.695406] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 823.695408] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 823.695411] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 823.695413] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 823.695416] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 823.695417] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 840.574235] INFO: task mount:4459 blocked for more than 120 seconds.
[ 840.574243] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 840.574250] mount D 0000000000000000 0 4459 3005 0x00000000
[ 840.574278] ffff88012fb717e0 0000000000000082 0000000000000000 ffff8800b4e4b000
[ 840.574303] 0000005100000002 ffff8800ce28c000 00000000000108a0 ffff8800ce28dfd8
[ 840.574325] ffff88012d6cd860 ffff88012d6cdb68 000000032b874000 ffffffffa00b44fc
[ 840.574347] Call Trace:
[ 840.574395] [<ffffffffa00b44fc>] ? __ata_scsi_queuecmd+0x185/0x1dc [libata]
[ 840.574424] [<ffffffff81305f56>] ? _spin_lock_irq+0x15/0x31
[ 840.574442] [<ffffffff81304eee>] ? schedule_timeout+0x1e/0xb8
[ 840.574458] [<ffffffff81179f84>] ? blk_peek_request+0x1a6/0x1ba
[ 840.574484] [<ffffffffa002cbcf>] ? scsi_dispatch_cmd+0x1cf/0x23c [scsi_mod]
[ 840.574500] [<ffffffff813042d1>] ? wait_for_common+0xcf/0x13d
[ 840.574515] [<ffffffff81045db6>] ? default_wake_function+0x0/0x9
[ 840.574529] [<ffffffff81305f56>] ? _spin_lock_irq+0x15/0x31
[ 840.574581] [<ffffffffa04a2773>] ? xfs_buf_iowait+0x27/0x30 [xfs]
[ 840.574627] [<ffffffffa0492879>] ? xlog_bread_noalign+0xb1/0xd8 [xfs]
[ 840.574674] [<ffffffffa04928c2>] ? xlog_bread+0x22/0x4a [xfs]
[ 840.574721] [<ffffffffa0494a28>] ? xlog_find_verify_log_record+0x7a/0x1b1 [xfs]
[ 840.574768] [<ffffffffa04928d9>] ? xlog_bread+0x39/0x4a [xfs]
[ 840.574815] [<ffffffffa0494cd8>] ? xlog_find_zeroed+0x179/0x1b6 [xfs]
[ 840.574865] [<ffffffffa0494d38>] ? xlog_find_head+0x23/0x2bc [xfs]
[ 840.574881] [<ffffffff81049ce9>] ? check_preempt_wakeup+0x1ee/0x234
[ 840.574896] [<ffffffff81017298>] ? native_sched_clock+0x34/0x5e
[ 840.574944] [<ffffffffa0495381>] ? xlog_find_tail+0x27/0x30e [xfs]
[ 840.574992] [<ffffffffa049567d>] ? xlog_recover+0x15/0x84 [xfs]
[ 840.575044] [<ffffffffa0490f54>] ? xfs_log_mount+0xd4/0x131 [xfs]
[ 840.575091] [<ffffffffa049797b>] ? xfs_mountfs+0x2d9/0x5c7 [xfs]
[ 840.575136] [<ffffffffa04a075f>] ? kmem_zalloc+0xd/0x28 [xfs]
[ 840.575183] [<ffffffffa0498654>] ? xfs_mru_cache_create+0x111/0x14c [xfs]
[ 840.575228] [<ffffffffa04a96e0>] ? xfs_fs_fill_super+0x206/0x365 [xfs]
[ 840.575244] [<ffffffff810f0795>] ? get_sb_bdev+0x125/0x16d
[ 840.575300] [<ffffffffa04a94da>] ? xfs_fs_fill_super+0x0/0x365 [xfs]
[ 840.575316] [<ffffffff810f03ad>] ? vfs_kern_mount+0x99/0x14a
[ 840.575331] [<ffffffff810f04b1>] ? do_kern_mount+0x43/0xe1
[ 840.575346] [<ffffffff81104987>] ? do_mount+0x743/0x7ab
[ 840.575361] [<ffffffff81104a6f>] ? sys_mount+0x80/0xbd
[ 840.575375] [<ffffffff81010ac2>] ? system_call_fastpath+0x16/0x1b
[ 854.695189] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 854.695199] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 854.695215] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 854.695221] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 854.695229] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 854.695235] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 854.695243] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 854.695249] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 854.695256] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 854.695262] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 885.695193] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 885.695202] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 885.695219] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 885.695225] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 885.695233] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 885.695239] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 885.695247] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 885.695252] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 885.695260] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= 5
[ 885.695265] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= 5
[ 885.695289] sd 0:0:0:0: [sdc] Unhandled error code
[ 885.695296] sd 0:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 885.695304] sd 0:0:0:0: [sdc] CDB: Read(10): 28 00 3a 3d 0c 00 00 04 00 00
[ 885.695326] end_request: I/O error, dev sdc, sector 977079296
[ 885.695360] sd 0:0:1:0: [sdd] Unhandled error code
[ 885.695365] sd 0:0:1:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 885.695372] sd 0:0:1:0: [sdd] CDB: Read(10): 28 00 3a 3d 0e 00 00 02 00 00
[ 885.695407] end_request: I/O error, dev sdd, sector 977079808
[ 885.695427] sd 0:0:2:0: [sde] Unhandled error code
[ 885.695440] sd 0:0:2:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 885.695454] sd 0:0:2:0: [sde] CDB: Read(10): 28 00 3a 3d 0c 00 00 02 00 00
[ 885.695500] end_request: I/O error, dev sde, sector 977079296
[ 885.695524] sd 0:0:3:0: [sdf] Unhandled error code
[ 885.695532] sd 0:0:3:0: [sdf] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 885.695544] sd 0:0:3:0: [sdf] CDB: Read(10): 28 00 3a 3d 0c 00 00 02 00 00
[ 885.695590] end_request: I/O error, dev sdf, sector 977079296
[ 885.695614] sd 0:0:4:0: [sdg] Unhandled error code
[ 885.695622] sd 0:0:4:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 885.695635] sd 0:0:4:0: [sdg] CDB: Read(10): 28 00 3a 3d 0a 00 00 04 00 00
[ 885.695684] end_request: I/O error, dev sdg, sector 977078784
[ 885.695805] I/O error in filesystem ("md0") meta-data dev md0 block 0x123313a00 ("xlog_bread") error 5 buf count 2097152
[ 885.696108] XFS: empty log check failed
[ 885.696115] XFS: log mount/recovery failed: error 5
[ 885.696670] XFS: log mount failed
