This patch is Errata for 1030 card.
Errata:
Certain conditions on the scsi bus may casue the 53C1030 to incorrectly signal
a SCSI_DATA_UNDERRUN to the host.
Workaround 1:
For an Errata on LSI53C1030 When the length of request data
and transfer data are different with result of command (READ or VERIFY),
DID_SOFT_ERROR is set.
Workaround 2:
For potential trouble on LSI53C1030. It is checked whether the length of
request data is equal to the length of transfer and residual.
MEDIUM_ERROR is set by incorrect data.
Signed-off-by: Kashyap Desai <kashyap.desai@xxxxxxx>
---
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index c295786..4f22744 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -792,11 +792,36 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
* precedence!
*/
sc->result = (DID_OK << 16) | scsi_status;
- if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
- /* Have already saved the status and sense data
+ if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
+
+ /*
+ * For an Errata on LSI53C1030
+ * When the length of request data
+ * and transfer data are different
+ * with result of command (READ or VERIFY),
+ * DID_SOFT_ERROR is set.
*/
- ;
- } else {
+ if (ioc->bus_type == SPI) {
+ if (pScsiReq->CDB[0] == READ_6 ||
+ pScsiReq->CDB[0] == READ_10 ||
+ pScsiReq->CDB[0] == READ_12 ||
+ pScsiReq->CDB[0] == READ_16 ||
+ pScsiReq->CDB[0] == VERIFY ||
+ pScsiReq->CDB[0] == VERIFY_16) {
+ if (scsi_bufflen(sc) !=
+ xfer_cnt) {
+ sc->result =
+ DID_SOFT_ERROR << 16;
+ printk(KERN_WARNING "Errata"
+ "on LSI53C1030 occurred."
+ "sc->req_bufflen=0x%02x,"
+ "xfer_cnt=0x%02x\n",
+ scsi_bufflen(sc),
+ xfer_cnt);
+ }
+ }
+ }
+
if (xfer_cnt < sc->underflow) {
if (scsi_status == SAM_STAT_BUSY)
sc->result = SAM_STAT_BUSY;
@@ -835,7 +860,58 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
sc->result = (DID_OK << 16) | scsi_status;
if (scsi_state == 0) {
;
- } else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
+ } else if (scsi_state &
+ MPI_SCSI_STATE_AUTOSENSE_VALID) {
+
+ /*
+ * For potential trouble on LSI53C1030.
+ * (date:2007.xx.)
+ * It is checked whether the length of
+ * request data is equal to
+ * the length of transfer and residual.
+ * MEDIUM_ERROR is set by incorrect data.
+ */
+ if ((ioc->bus_type == SPI) &&
+ (sc->sense_buffer[2] & 0x20)) {
+ u32 difftransfer;
+ difftransfer =
+ sc->sense_buffer[3] << 24 |
+ sc->sense_buffer[4] << 16 |
+ sc->sense_buffer[5] << 8 |
+ sc->sense_buffer[6];
+ if (((sc->sense_buffer[3] & 0x80) ==
+ 0x80) && (scsi_bufflen(sc)
+ != xfer_cnt)) {
+ sc->sense_buffer[2] =
+ MEDIUM_ERROR;
+ sc->sense_buffer[12] = 0xff;
+ sc->sense_buffer[13] = 0xff;
+ printk(KERN_WARNING"Errata"
+ "on LSI53C1030 occurred."
+ "sc->req_bufflen=0x%02x,"
+ "xfer_cnt=0x%02x\n" ,
+ scsi_bufflen(sc),
+ xfer_cnt);
+ }
+ if (((sc->sense_buffer[3] & 0x80)
+ != 0x80) &&
+ (scsi_bufflen(sc) !=
+ xfer_cnt + difftransfer)) {
+ sc->sense_buffer[2] =
+ MEDIUM_ERROR;
+ sc->sense_buffer[12] = 0xff;
+ sc->sense_buffer[13] = 0xff;
+ printk(KERN_WARNING
+ "Errata on LSI53C1030 occurred"
+ "sc->req_bufflen=0x%02x,"
+ " xfer_cnt=0x%02x,"
+ "difftransfer=0x%02x\n",
+ scsi_bufflen(sc),
+ xfer_cnt,
+ difftransfer);
+ }
+ }
+
/*
* If running against circa 200003dd 909 MPT f/w,
* may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
