sdparm is a command line utility designed to get and set SCSI device parameters (cf hdparm for ATA disks). The parameters are held in mode pages. Apart from SCSI devices (e.g. disks, tapes and enclosures) sdparm can be used on any device that uses a SCSI command set. Almost all CD/DVD/BD drives use the SCSI MMC set irrespective of the transport. sdparm also can decode VPD pages including the device identification page. Commands to start and stop the media; load and unload removable media and some other housekeeping functions are supported. sdparm supports both the linux kernel 2.4 and 2.6 series with ports to FreeBSD, Solaris, Tru64 and Windows. The version tracks changes in draft standards from www.t10.org since June 2008. ChangeLog for sdparm-1.04 [20090920] [svn: r129] - add SAT ATA Power condition mode page (sat2r06) - add SBC Thin provisioning mode page (sbc3r20) - add SBC Thin provisioning VPD page (sbc3r20) - sync with spc4r21 - add Power condition, update extended inquiry VPD pages - smc3: add Device capabilities + Extended device capabilities + Transport geometry parameters mode pages - prepare for Thin provisioning VPD and mode pages - expand block limits VPD page - update Power condition mode page - rename SAS-2 phy mode page to Enhanced phy control (SAS) - add ADC mode (sub)page place holders - print mode page descriptors in full in more contexts - add linux bsg support - scripts/sas_disk_blink: moved here from sg3_utils package - rework the '-w' option (win32) per sg_scan in sg3_utils - change SDPARM_* constants to SG_LIB_* - remove sdparm.html, refer to its url in sdparm.8 - sdparm.spec: correction to configure call ChangeLog for sdparm-1.03 [20080623] [svn: r96] .... For more information and downloads see: http://sg.danny.cz/sg/sdparm.html Note that the web site has changed since the previous release. A release announcement will be sent to freshmeat.net . Doug Gilbert -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html