Add the 3 mins support during the FW boot-up to the driver. Also add the fix for the 64 bit sense buff error.
Signed-off-by Bo Yang<bo.yang@xxxxxxx>
---
drivers/scsi/megaraid/megaraid_sas.c | 36 ++++++++++++++++++++---------------
1 file changed, 21 insertions(+), 15 deletions(-)
diff -rupN linux-2.6.28_orig/drivers/scsi/megaraid/megaraid_sas.c linux-2.6.28_new/drivers/scsi/megaraid/megaraid_sas.c
--- linux-2.6.28_orig/drivers/scsi/megaraid/megaraid_sas.c 2009-09-15 05:01:51.000000000 -0400
+++ linux-2.6.28_new/drivers/scsi/megaraid/megaraid_sas.c 2009-09-15 05:23:28.000000000 -0400
@@ -1820,6 +1820,7 @@ megasas_transition_to_ready(struct megas
u8 max_wait;
u32 fw_state;
u32 cur_state;
+ u32 abs_state, curr_abs_state;
fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
@@ -1829,6 +1830,9 @@ megasas_transition_to_ready(struct megas
while (fw_state != MFI_STATE_READY) {
+ abs_state =
+ instance->instancet->read_fw_status_reg(instance->reg_set);
+
switch (fw_state) {
case MFI_STATE_FAULT:
@@ -1854,7 +1858,7 @@ megasas_transition_to_ready(struct megas
&instance->reg_set->inbound_doorbell);
}
- max_wait = 2;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_WAIT_HANDSHAKE;
break;
@@ -1869,7 +1873,7 @@ megasas_transition_to_ready(struct megas
writel(MFI_INIT_HOTPLUG,
&instance->reg_set->inbound_doorbell);
- max_wait = 10;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_BOOT_MESSAGE_PENDING;
break;
@@ -1888,7 +1892,7 @@ megasas_transition_to_ready(struct megas
writel(MFI_RESET_FLAGS,
&instance->reg_set->inbound_doorbell);
- max_wait = 60;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_OPERATIONAL;
break;
@@ -1896,32 +1900,32 @@ megasas_transition_to_ready(struct megas
/*
* This state should not last for more than 2 seconds
*/
- max_wait = 2;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_UNDEFINED;
break;
case MFI_STATE_BB_INIT:
- max_wait = 2;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_BB_INIT;
break;
case MFI_STATE_FW_INIT:
- max_wait = 20;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_FW_INIT;
break;
case MFI_STATE_FW_INIT_2:
- max_wait = 20;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_FW_INIT_2;
break;
case MFI_STATE_DEVICE_SCAN:
- max_wait = 20;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_DEVICE_SCAN;
break;
case MFI_STATE_FLUSH_CACHE:
- max_wait = 20;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_FLUSH_CACHE;
break;
@@ -1937,8 +1941,10 @@ megasas_transition_to_ready(struct megas
for (i = 0; i < (max_wait * 1000); i++) {
fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &
MFI_STATE_MASK ;
+ curr_abs_state =
+ instance->instancet->read_fw_status_reg(instance->reg_set);
- if (fw_state == cur_state) {
+ if (abs_state == curr_abs_state) {
msleep(1);
} else
break;
@@ -1947,7 +1953,7 @@ megasas_transition_to_ready(struct megas
/*
* Return error if fw_state hasn't changed after max_wait
*/
- if (fw_state == cur_state) {
+ if (curr_abs_state == abs_state) {
printk(KERN_DEBUG "FW state [%d] hasn't changed "
"in %d secs\n", fw_state, max_wait);
return -ENODEV;
@@ -3515,7 +3521,7 @@ megasas_mgmt_fw_ioctl(struct megasas_ins
int error = 0, i;
void *sense = NULL;
dma_addr_t sense_handle;
- u32 *sense_ptr;
+ unsigned long *sense_ptr;
memset(kbuff_arr, 0, sizeof(kbuff_arr));
@@ -3593,7 +3599,7 @@ megasas_mgmt_fw_ioctl(struct megasas_ins
}
sense_ptr =
- (u32 *) ((unsigned long)cmd->frame + ioc->sense_off);
+ (unsigned long *) ((unsigned long)cmd->frame + ioc->sense_off);
*sense_ptr = sense_handle;
}
@@ -3624,8 +3630,8 @@ megasas_mgmt_fw_ioctl(struct megasas_ins
* sense_ptr points to the location that has the user
* sense buffer address
*/
- sense_ptr = (u32 *) ((unsigned long)ioc->frame.raw +
- ioc->sense_off);
+ sense_ptr = (unsigned long *) ((unsigned long)ioc->frame.raw +
+ ioc->sense_off);
if (copy_to_user((void __user *)((unsigned long)(*sense_ptr)),
sense, ioc->sense_len)) {
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
