http://bugzilla.kernel.org/show_bug.cgi?id=14159 --- Comment #10 from Anonymous Emailer <anonymous@xxxxxxxxxxxxxxxxxxxx> 2009-09-15 13:55:57 --- Reply-To: James.Bottomley@xxxxxxx On Tue, 2009-09-15 at 13:07 +0000, bugzilla-daemon@xxxxxxxxxxxxxxxxxxx wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=14159 cc'ing linux-acpi James > --- Comment #8 from g.giorgetti@xxxxxxxxxxxxxx 2009-09-15 13:07:42 --- > All right, we've just rebooted the server and tried with the "noioapicquirk" > param and everything is fine. > > Looking at the patch you put up in your reply I can see some code for amd_813x > (quirk_disable_amd_813x_boot_interrupt and the definition for AMD_813X_REV_B2) > > So just in case you need it, I'm pasting the lspci for the AMD-8131 we have. > Please let me know if you need anything else. > > Thank you, > Gabriele > > > > 40:0f.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) > (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 150 > Bus: primary=40, secondary=41, subordinate=41, sec-latency=96 > I/O behind bridge: 00007000-00007fff > Memory behind bridge: e1f00000-e1ffffff > Prefetchable memory behind bridge: 00000000e0200000-00000000e02fffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [a0] PCI-X bridge device > Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz > Status: Dev=40:0f.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- > Upstream: Capacity=14 CommitmentLimit=65535 > Downstream: Capacity=2 CommitmentLimit=65535 > Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration > Capabilities: [c0] HyperTransport: Slave or Primary Interface > !!! Possibly incomplete decoding > Command: BaseUnitID=15 UnitCnt=2 MastHost- DefDir- > Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 > Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 > Link Config 1: MLWI=8bit MLWO=8bit LWI=N/C LWO=N/C > Revision ID: 1.02 > > 40:0f.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) > (prog-if 10 [IO-APIC]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 > > 40:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) > (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 150 > Bus: primary=40, secondary=42, subordinate=42, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [a0] PCI-X bridge device > Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv > Status: Dev=40:10.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- > Upstream: Capacity=14 CommitmentLimit=65535 > Downstream: Capacity=2 CommitmentLimit=65535 > Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration > > 40:10.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) > (prog-if 10 [IO-APIC]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 > > 41:01.0 SCSI storage controller: Adaptec ASC-29320ALP U320 (rev 10) > Subsystem: Adaptec Unknown device 0044 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 148 (10000ns min, 6250ns max), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 19 > Region 0: I/O ports at 7000 [disabled] [size=256] > Region 1: Memory at e1f80000 (64-bit, non-prefetchable) [size=8K] > Region 3: I/O ports at 7800 [disabled] [size=256] > [virtual] Expansion ROM at e0200000 [disabled] [size=512K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 > Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [94] PCI-X non-bridge device > Command: DPERE- ERO- RBC=512 OST=3 > Status: Dev=41:01.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 > DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz- > -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
