1.Changed driver prints to use scmd_printk, sdev_printk
2.Changed dev_err calls to scmd_printk for scsi related print messages
Signed-off-by: Anil Ravindranath <anil_ravindranath@xxxxxxxxxxxxxx>
pmcraid.c | 58
+++++++++++++++++++++++++++++++---------------------------
1 file changed, 31 insertions(+), 27 deletions(-)
--- scsi-misc-2.6.orig/drivers/scsi/pmcraid.c 2009-09-09 10:14:45.000000000 -0700
+++ scsi-misc-2.6/drivers/scsi/pmcraid.c 2009-09-09 12:32:01.000000000 -0700
@@ -46,6 +46,7 @@
#include <linux/mutex.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_cmnd.h>
@@ -684,7 +685,7 @@ static void pmcraid_timeout_handler(stru
struct pmcraid_instance *pinstance = cmd->drv_inst;
unsigned long lock_flags;
- dev_err(&pinstance->pdev->dev,
+ dev_info(&pinstance->pdev->dev,
"Adapter being reset due to command timeout.\n");
/* Command timeouts result in hard reset sequence. The command that got
@@ -815,8 +816,9 @@ static void pmcraid_erp_done(struct pmcr
if (PMCRAID_IOASC_SENSE_KEY(ioasc) > 0) {
scsi_cmd->result |= (DID_ERROR << 16);
- pmcraid_err("command CDB[0] = %x failed with IOASC: 0x%08X\n",
- cmd->ioa_cb->ioarcb.cdb[0], ioasc);
+ scmd_printk(KERN_INFO, scsi_cmd,
+ "command CDB[0] = %x failed with IOASC: 0x%08X\n",
+ cmd->ioa_cb->ioarcb.cdb[0], ioasc);
}
/* if we had allocated sense buffers for request sense, copy the sense
@@ -1541,13 +1543,13 @@ static void pmcraid_handle_error_log(str
if (pinstance->ldn.hcam->notification_lost ==
HOSTRCB_NOTIFICATIONS_LOST)
- dev_err(&pinstance->pdev->dev, "Error notifications lost\n");
+ dev_info(&pinstance->pdev->dev, "Error notifications lost\n");
ioasc = le32_to_cpu(hcam_ldn->error_log.fd_ioasc);
if (ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET ||
ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER) {
- dev_err(&pinstance->pdev->dev,
+ dev_info(&pinstance->pdev->dev,
"UnitAttention due to IOA Bus Reset\n");
scsi_report_bus_reset(
pinstance->host,
@@ -1584,7 +1586,7 @@ static void pmcraid_process_ccn(struct p
atomic_read(&pinstance->ccn.ignore) == 1) {
return;
} else if (ioasc) {
- dev_err(&pinstance->pdev->dev,
+ dev_info(&pinstance->pdev->dev,
"Host RCB (CCN) failed with IOASC: 0x%08X\n", ioasc);
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
pmcraid_send_hcam(pinstance, PMCRAID_HCAM_CODE_CONFIG_CHANGE);
@@ -1634,7 +1636,7 @@ static void pmcraid_process_ldn(struct p
return;
}
} else {
- dev_err(&pinstance->pdev->dev,
+ dev_info(&pinstance->pdev->dev,
"Host RCB(LDN) failed with IOASC: 0x%08X\n", ioasc);
}
/* send netlink message for HCAM notification if enabled */
@@ -1822,7 +1824,6 @@ static void pmcraid_fail_outstanding_cmd
scsi_dma_unmap(scsi_cmd);
pmcraid_return_cmd(cmd);
-
pmcraid_info("failing(%d) CDB[0] = %x result: %x\n",
le32_to_cpu(resp) >> 2,
cmd->ioa_cb->ioarcb.cdb[0],
@@ -2514,7 +2515,8 @@ static int pmcraid_reset_device(
res = scsi_cmd->device->hostdata;
if (!res) {
- pmcraid_err("reset_device: NULL resource pointer\n");
+ sdev_printk(KERN_ERR, scsi_cmd->device,
+ "reset_device: NULL resource pointer\n");
return FAILED;
}
@@ -2752,8 +2754,8 @@ static int pmcraid_eh_abort_handler(stru
pinstance =
(struct pmcraid_instance *)scsi_cmd->device->host->hostdata;
- dev_err(&pinstance->pdev->dev,
- "I/O command timed out, aborting it.\n");
+ scmd_printk(KERN_INFO, scsi_cmd,
+ "I/O command timed out, aborting it.\n");
res = scsi_cmd->device->hostdata;
@@ -2824,7 +2826,8 @@ static int pmcraid_eh_abort_handler(stru
*/
static int pmcraid_eh_device_reset_handler(struct scsi_cmnd *scmd)
{
- pmcraid_err("Doing device reset due to an I/O command timeout.\n");
+ scmd_printk(KERN_INFO, scmd,
+ "resetting device due to an I/O command timeout.\n");
return pmcraid_reset_device(scmd,
PMCRAID_INTERNAL_TIMEOUT,
RESET_DEVICE_LUN);
@@ -2832,7 +2835,8 @@ static int pmcraid_eh_device_reset_handl
static int pmcraid_eh_bus_reset_handler(struct scsi_cmnd *scmd)
{
- pmcraid_err("Doing bus reset due to an I/O command timeout.\n");
+ scmd_printk(KERN_INFO, scmd,
+ "Doing bus reset due to an I/O command timeout.\n");
return pmcraid_reset_device(scmd,
PMCRAID_RESET_BUS_TIMEOUT,
RESET_DEVICE_BUS);
@@ -2840,7 +2844,8 @@ static int pmcraid_eh_bus_reset_handler(
static int pmcraid_eh_target_reset_handler(struct scsi_cmnd *scmd)
{
- pmcraid_err("Doing target reset due to an I/O command timeout.\n");
+ scmd_printk(KERN_INFO, scmd,
+ "Doing target reset due to an I/O command timeout.\n");
return pmcraid_reset_device(scmd,
PMCRAID_INTERNAL_TIMEOUT,
RESET_DEVICE_TARGET);
@@ -2988,11 +2993,11 @@ static int pmcraid_build_ioadl(
nseg = scsi_dma_map(scsi_cmd);
if (nseg < 0) {
- dev_err(&pinstance->pdev->dev, "scsi_map_dma failed!\n");
+ scmd_printk(KERN_ERR, scsi_cmd, "scsi_map_dma failed!\n");
return -1;
} else if (nseg > PMCRAID_MAX_IOADLS) {
scsi_dma_unmap(scsi_cmd);
- dev_err(&pinstance->pdev->dev,
+ scmd_printk(KERN_ERR, scsi_cmd,
"sg count is (%d) more than allowed!\n", nseg);
return -1;
}
@@ -5040,7 +5045,7 @@ static int pmcraid_resume(struct pci_dev
rc = pci_enable_device(pdev);
if (rc) {
- pmcraid_err("pmcraid: Enable device failed\n");
+ dev_err(&pdev->dev, "resume: Enable device failed\n");
return rc;
}
@@ -5054,7 +5059,7 @@ static int pmcraid_resume(struct pci_dev
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc != 0) {
- dev_err(&pdev->dev, "Failed to set PCI DMA mask\n");
+ dev_err(&pdev->dev, "resume: Failed to set PCI DMA mask\n");
goto disable_device;
}
@@ -5063,7 +5068,8 @@ static int pmcraid_resume(struct pci_dev
rc = pmcraid_register_interrupt_handler(pinstance);
if (rc) {
- pmcraid_err("resume: couldn't register interrupt handlers\n");
+ dev_err(&pdev->dev,
+ "resume: couldn't register interrupt handlers\n");
rc = -ENODEV;
goto release_host;
}
@@ -5080,7 +5086,7 @@ static int pmcraid_resume(struct pci_dev
* state.
*/
if (pmcraid_reset_bringup(pinstance)) {
- pmcraid_err("couldn't initialize IOA \n");
+ dev_err(&pdev->dev, "couldn't initialize IOA \n");
rc = -ENODEV;
goto release_tasklets;
}
@@ -5187,7 +5193,7 @@ static void pmcraid_init_res_table(struc
LIST_HEAD(old_res);
if (pinstance->cfg_table->flags & MICROCODE_UPDATE_REQUIRED)
- dev_err(&pinstance->pdev->dev, "Require microcode download\n");
+ pmcraid_err("IOA requires microcode download\n");
/* resource list is protected by pinstance->resource_lock.
* init_res_table can be called from probe (user-thread) or runtime
@@ -5224,8 +5230,7 @@ static void pmcraid_init_res_table(struc
if (!found) {
if (list_empty(&pinstance->free_res_q)) {
- dev_err(&pinstance->pdev->dev,
- "Too many devices attached\n");
+ pmcraid_err("Too many devices attached\n");
break;
}
@@ -5442,7 +5447,7 @@ static int __devinit pmcraid_probe(
rc = pmcraid_register_interrupt_handler(pinstance);
if (rc) {
- pmcraid_err("couldn't register interrupt handler\n");
+ dev_err(&pdev->dev, "couldn't register interrupt handler\n");
goto out_scsi_host_put;
}
@@ -5466,7 +5471,7 @@ static int __devinit pmcraid_probe(
*/
pmcraid_info("starting IOA initialization sequence\n");
if (pmcraid_reset_bringup(pinstance)) {
- pmcraid_err("couldn't initialize IOA \n");
+ dev_err(&pdev->dev, "couldn't initialize IOA \n");
rc = 1;
goto out_release_bufs;
}
@@ -5534,7 +5539,6 @@ static struct pci_driver pmcraid_driver
.shutdown = pmcraid_shutdown
};
-
/**
* pmcraid_init - module load entry point
*/
@@ -5566,7 +5570,6 @@ static int __init pmcraid_init(void)
goto out_unreg_chrdev;
}
-
error = pmcraid_netlink_init();
if (error)
@@ -5584,6 +5587,7 @@ static int __init pmcraid_init(void)
out_unreg_chrdev:
unregister_chrdev_region(MKDEV(pmcraid_major, 0), PMCRAID_MAX_ADAPTERS);
+
out_init:
return error;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
