Thanks James.. Will take care next time..
________________________________________
From: James Bottomley [James.Bottomley@xxxxxxx]
Sent: Saturday, September 05, 2009 10:19 AM
To: Moger, Babu
Cc: 'linux-scsi@xxxxxxxxxxxxxxx'; 'device mapper development'; 'sekharan@xxxxxxxxxxxxxxxxxx'; Chauhan, Vijay; Stankey, Robert; Dachepalli, Sudhir
Subject: Re: [PATCH 3/3][RESUBMIT] scsi_dh_rdac: changes for rdac debug logging
On Thu, 2009-09-03 at 21:42 -0600, Moger, Babu wrote:
> Patch to add debugging stuff for rdac device handler.
> - Added a bit mask "module parameter" rdac_logging with 2 bits for each type of logging.
> - currently defined only two types of logging(failover and sense logging). Can be enhanced later if required.
> - By default only failover logging is enabled which is equivalent of current logging.
>
> Signed-off-by: Babu Moger <babu.moger@xxxxxxx>
> Reviewed-by: Vijay Chauhan <vijay.chauhan@xxxxxxx>
> Reviewed-by: Bob Stankey <Robert.stankey@xxxxxxx>
>
> ---
> --- linux-2.6.31-rc5/drivers/scsi/device_handler/scsi_dh_rdac.c.orig 2009-09-03 14:52:46.000000000 -0500
> +++ linux-2.6.31-rc5/drivers/scsi/device_handler/scsi_dh_rdac.c 2009-09-03 14:53:06.000000000 -0500
> @@ -201,6 +201,31 @@ static const char *lun_state[] =
> static LIST_HEAD(ctlr_list);
> static DEFINE_SPINLOCK(list_lock);
>
> +/*
> + * module parameter to enable rdac debug logging.
> + * 2 bits for each type of logging, only two types defined for now
> + * Can be enhanced if required at later point
> + */
> +static int rdac_logging = 1;
> +module_param(rdac_logging, int, S_IRUGO|S_IWUSR);
> +MODULE_PARM_DESC(rdac_logging, "A bit mask of rdac logging levels, "
> + "Default is 1 - failover logging enabled, "
> + "set it to 0xF to enable all the logs");
> +
> +#define RDAC_LOG_FAILOVER 0
> +#define RDAC_LOG_SENSE 2
> +
> +#define RDAC_LOG_BITS 2
> +
> +#define RDAC_LOG_LEVEL(SHIFT) \
> + ((rdac_logging >> (SHIFT)) & ((1 << (RDAC_LOG_BITS)) - 1))
> +
> +#define RDAC_LOG(SHIFT, sdev, f, arg...) \
> +do { \
> + if (unlikely(RDAC_LOG_LEVEL(SHIFT))) \
> + sdev_printk(KERN_INFO, sdev, RDAC_NAME ": " f "\n", ## arg); \
> +} while (0);
> +
> static inline struct rdac_dh_data *get_rdac_data(struct scsi_device *sdev)
> {
> struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
> @@ -469,6 +494,7 @@ static int mode_select_handle_sense(stru
> {
> struct scsi_sense_hdr sense_hdr;
> int err = SCSI_DH_IO, ret;
> + struct rdac_dh_data *h = get_rdac_data(sdev);
>
> ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr);
> if (!ret)
> @@ -497,11 +523,14 @@ static int mode_select_handle_sense(stru
> err = SCSI_DH_RETRY;
> break;
> default:
> - sdev_printk(KERN_INFO, sdev,
> - "MODE_SELECT failed with sense %02x/%02x/%02x.\n",
> - sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq);
> + break;
> }
>
> + RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
> + "MODE_SELECT returned with sense %02x/%02x/%02x",
> + (char *) h->ctlr->array_name, h->ctlr->index,
> + sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq);
> +
> done:
> return err;
> }
> @@ -518,7 +547,9 @@ retry:
> if (!rq)
> goto done;
>
> - sdev_printk(KERN_INFO, sdev, "%s MODE_SELECT command.\n",
> + RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
> + "%s MODE_SELECT command",
> + (char *) h->ctlr->array_name, h->ctlr->index,
> (retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying");
>
> err = blk_execute_rq(q, NULL, rq, 1);
> @@ -528,8 +559,12 @@ retry:
> if (err == SCSI_DH_RETRY && retry_cnt--)
> goto retry;
> }
> - if (err == SCSI_DH_OK)
> + if (err == SCSI_DH_OK) {
> h->state = RDAC_STATE_ACTIVE;
> + RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
> + "MODE_SELECT completed",
> + (char *) h->ctlr->array_name, h->ctlr->index);
> + }
>
> done:
> return err;
> @@ -567,6 +602,12 @@ static int rdac_check_sense(struct scsi_
> struct scsi_sense_hdr *sense_hdr)
> {
> struct rdac_dh_data *h = get_rdac_data(sdev);
> +
> + RDAC_LOG(RDAC_LOG_SENSE, sdev, "array %s, ctlr %d, "
> + "I/O returned with sense %02x/%02x/%02x",
> + (char *) h->ctlr->array_name, h->ctlr->index,
> + sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq);
> +
> switch (sense_hdr->sense_key) {
> case NOT_READY:
> if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
Could you run these through checkpatch.pl before sending them next time?
ERROR: trailing whitespace
#30: FILE: drivers/scsi/device_handler/scsi_dh_rdac.c:204:
+/* $
ERROR: trailing whitespace
#32: FILE: drivers/scsi/device_handler/scsi_dh_rdac.c:206:
+ * 2 bits for each type of logging, only two types defined for now $
ERROR: code indent should use tabs where possible
#47: FILE: drivers/scsi/device_handler/scsi_dh_rdac.c:221:
+ ((rdac_logging >> (SHIFT)) & ((1 << (RDAC_LOG_BITS)) - 1))$
ERROR: trailing whitespace
#113: FILE: drivers/scsi/device_handler/scsi_dh_rdac.c:605:
+^I^I$
total: 4 errors, 0 warnings, 90 lines checked
I fixed it all up this time around.
James--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
