Patch to add debugging stuff for rdac device handler.
- Added a bit mask "module parameter" rdac_logging with 2 bits for each type of logging.
- currently defined only two types of logging(failover and sense logging). Can be enhanced later if required.
- By default only failover logging is enabled which is equivalent of current logging.
Signed-off-by: Babu Moger <babu.moger@xxxxxxx>
Reviewed-by: Vijay Chauhan <vijay.chauhan@xxxxxxx>
Reviewed-by: Bob Stankey <Robert.stankey@xxxxxxx>
---
--- linux-2.6.31-rc5/drivers/scsi/device_handler/scsi_dh_rdac.c.orig 2009-08-27 18:33:39.000000000 -0500
+++ linux-2.6.31-rc5/drivers/scsi/device_handler/scsi_dh_rdac.c 2009-08-27 18:35:24.000000000 -0500
@@ -201,6 +201,31 @@ static const char *lun_state[] =
static LIST_HEAD(ctlr_list);
static DEFINE_SPINLOCK(list_lock);
+/*
+ * module parameter to enable rdac debug logging.
+ * 2 bits for each type of logging, only two types defined for now
+ * Can be enhanced if required at later point
+ */
+static int rdac_logging = 1;
+module_param(rdac_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(rdac_logging, "A bit mask of rdac logging levels, "
+ "Default is 1 - failover logging enabled, "
+ "set it to 0xF to enable all the logs");
+
+#define RDAC_LOG_FAILOVER 0
+#define RDAC_LOG_SENSE 2
+
+#define RDAC_LOG_BITS 2
+
+#define RDAC_LOG_LEVEL(SHIFT) \
+ ((rdac_logging >> (SHIFT)) & ((1 << (RDAC_LOG_BITS)) - 1))
+
+#define RDAC_LOG(SHIFT, sdev, f, arg...) \
+do { \
+ if (unlikely(RDAC_LOG_LEVEL(SHIFT))) \
+ sdev_printk(KERN_INFO, sdev, RDAC_NAME ": " f "\n", ## arg); \
+} while (0);
+
static inline struct rdac_dh_data *get_rdac_data(struct scsi_device *sdev)
{
struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
@@ -480,6 +505,7 @@ static int mode_select_handle_sense(stru
{
struct scsi_sense_hdr sense_hdr;
int err = SCSI_DH_IO, ret;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr);
if (!ret)
@@ -508,11 +534,14 @@ static int mode_select_handle_sense(stru
err = SCSI_DH_RETRY;
break;
default:
- sdev_printk(KERN_INFO, sdev,
- "MODE_SELECT failed with sense %02x/%02x/%02x.\n",
- sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq);
+ break;
}
+ RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
+ "MODE_SELECT returned with sense %02x/%02x/%02x",
+ (char *) h->ctlr->array_name, h->ctlr->index,
+ sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq);
+
done:
return err;
}
@@ -529,7 +558,9 @@ retry:
if (!rq)
goto done;
- sdev_printk(KERN_INFO, sdev, "%s MODE_SELECT command.\n",
+ RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
+ "%s MODE_SELECT command",
+ (char *) h->ctlr->array_name, h->ctlr->index,
(retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying");
err = blk_execute_rq(q, NULL, rq, 1);
@@ -539,8 +570,12 @@ retry:
if (err == SCSI_DH_RETRY && retry_cnt--)
goto retry;
}
- if (err == SCSI_DH_OK)
+ if (err == SCSI_DH_OK) {
h->state = RDAC_STATE_ACTIVE;
+ RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
+ "MODE_SELECT completed",
+ (char *) h->ctlr->array_name, h->ctlr->index);
+ }
done:
return err;
@@ -578,6 +613,12 @@ static int rdac_check_sense(struct scsi_
struct scsi_sense_hdr *sense_hdr)
{
struct rdac_dh_data *h = get_rdac_data(sdev);
+
+ RDAC_LOG(RDAC_LOG_SENSE, sdev, "array %s, ctlr %d, "
+ "I/O returned with sense %02x/%02x/%02x",
+ (char *) h->ctlr->array_name, h->ctlr->index,
+ sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq);
+
switch (sense_hdr->sense_key) {
case NOT_READY:
if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
