From: Santosh Vernekar <santosh.vernekar@xxxxxxxxxx>
In fabric-login based on iop BIT_8 firmware notifies presence of
a FCP2 device and not necessarily a TAPE device. So instead of
setting FCF_TAPE_PRESENT flag there we set it using
scsi_device->type after mid-layer scan recognises "type" of the
device.
It also adds a new flag FCF_FCP2_DEVICE for any future use.
Signed-off-by: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Signed-off-by: Giridhar Malavali <giridhar.malavali@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_def.h | 1 +
drivers/scsi/qla2xxx/qla_init.c | 2 +-
drivers/scsi/qla2xxx/qla_isr.c | 4 ++--
drivers/scsi/qla2xxx/qla_os.c | 3 +++
4 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index f19a936..b1d5148 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1614,6 +1614,7 @@ typedef struct fc_port {
#define FCF_FABRIC_DEVICE BIT_0
#define FCF_LOGIN_NEEDED BIT_1
#define FCF_TAPE_PRESENT BIT_2
+#define FCF_FCP2_DEVICE BIT_3
/* No loop ID flag. */
#define FC_NO_LOOP_ID 0x1000
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2214ece..d420385 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3341,7 +3341,7 @@ qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport,
} else {
fcport->port_type = FCT_TARGET;
if (mb[1] & BIT_1) {
- fcport->flags |= FCF_TAPE_PRESENT;
+ fcport->flags |= FCF_FCP2_DEVICE;
}
}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index e07f37e..6c14b1e 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1017,7 +1017,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
data[0] = MBS_COMMAND_COMPLETE;
if (lio->ctx.type == SRB_LOGIN_CMD && le16_to_cpu(mbx->mb1) & BIT_1)
- fcport->flags |= FCF_TAPE_PRESENT;
+ fcport->flags |= FCF_FCP2_DEVICE;
goto done_post_logio_done_work;
}
@@ -1210,7 +1210,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
if (iop[0] & BIT_4) {
fcport->port_type = FCT_TARGET;
if (iop[0] & BIT_8)
- fcport->flags |= FCF_TAPE_PRESENT;
+ fcport->flags |= FCF_FCP2_DEVICE;
}
if (iop[0] & BIT_5)
fcport->port_type = FCT_INITIATOR;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7d56692..6b2b637 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1217,6 +1217,7 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
scsi_qla_host_t *vha = shost_priv(sdev->host);
struct qla_hw_data *ha = vha->hw;
struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
+ fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
struct req_que *req = vha->req;
if (sdev->tagged_supported)
@@ -1225,6 +1226,8 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
scsi_deactivate_tcq(sdev, req->max_q_depth);
rport->dev_loss_tmo = ha->port_down_retry_count;
+ if (sdev->type == TYPE_TAPE)
+ fcport->flags |= FCF_TAPE_PRESENT;
return 0;
}
--
1.6.2.rc1.30.gd43c
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
