On 08/18/2009 01:02 PM, Moore, Eric wrote:
On Tuesday, August 18, 2009 10:13 AM, James Bottomley wrote:
The code (0x12) means PL_LOGINFO_CODE_ABORT
The sub_code(0x102) means
PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATHWAY_BLOCKED
To translate this according to the SAS 1.1 specification, a
pathway open
failed because a timeout fired before the path could be established.
You can mitigate this by increasing the expander partial
pathway timeout
value. (or just move to a more efficient configuration).
I was telling Ric it was something else in seperate email. The pathway was blocked due to two initiors establishing a connection to single port. That woudl be the case if he wasn't using a sata multiplexor.
anyways, if the pathway timeout is the issue, then I believe you can set the pathway timeout value using Dougs smp tools, smp_phy_control , setting the --pptv command line option.
http://sg.danny.cz/sg/smp_utils.html
Thanks, I will give that a try,
ric
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
