Hi All,
I'm trying to use the multipath tools to enable multipath on an EMC Clariion AX4-5 storage array. The following is the information for my system:
Multipath-Tools Version:
multipath -v
Missing option arguement
multipath-tools v0.4.8 (08/02, 2007)
Linux Kernel Version
Linux localhost 2.6.29.4-loglogic #2 SMP Thu Aug 6 19:02:01 PDT 2009 i686 GNU/Linux
The following kernel config has been turned on:
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
HBA Model: QLogic QLE2562
First I tried a dry run using multipath, with the following results:
Logapp root:~ 0$ multipath -d
create: 3600050e05f325700345300002c820000 AMCC ,9690SA-8I DIS
[size=1.4T][features=0][hwhandler=0]
\_ round-robin 0 [prio=1][undef]
\_ 0:0:0:0 sda 8:0 [undef][ready]
create: SATA_SEAGATE_ST35006_9QG953PN ATA ,SEAGATE ST3500
[size=466G][features=0][hwhandler=0]
\_ round-robin 0 [prio=1][undef]
\_ 1:0:0:0 sdb 8:16 [undef][ready]
create: SATA_SEAGATE_ST35006_9QG977GT ATA ,SEAGATE ST3500
[size=466G][features=0][hwhandler=0]
\_ round-robin 0 [prio=1][undef]
\_ 2:0:0:0 sdc 8:32 [undef][ready]
create: 36006016005f021002a26d6d7b84fde11 DGC ,RAID 5
[size=1.4T][features=1 queue_if_no_path][hwhandler=1 emc]
\_ round-robin 0 [prio=1][undef]
\_ 5:0:0:0 sdd 8:48 [undef][ready]
\_ round-robin 0 [prio=0][undef]
\_ 6:0:0:0 sdj 8:144 [undef][ready]
create: 36006016005f02100545f6b5aa74fde11 DGC ,RAID 5
[size=1.4T][features=1 queue_if_no_path][hwhandler=1 emc]
\_ round-robin 0 [prio=1][undef]
\_ 5:0:0:1 sde 8:64 [undef][ready]
\_ round-robin 0 [prio=0][undef]
\_ 6:0:0:1 sdk 8:160 [undef][ready]
create: 36006016005f02100b0dfd619b94fde11 DGC ,RAID 5
[size=300G][features=1 queue_if_no_path][hwhandler=1 emc]
\_ round-robin 0 [prio=1][undef]
\_ 5:0:0:2 sdf 8:80 [undef][ready]
\_ round-robin 0 [prio=0][undef]
\_ 6:0:0:2 sdl 8:176 [undef][ready]
create: 36006016005f0210016bb2544b84fde11 DGC ,RAID 5
[size=300G][features=1 queue_if_no_path][hwhandler=1 emc]
\_ round-robin 0 [prio=1][undef]
\_ 5:0:0:3 sdg 8:96 [undef][ready]
\_ round-robin 0 [prio=0][undef]
\_ 6:0:0:3 sdm 8:192 [undef][ready]
create: 36006016005f02100e89714f7b74fde11 DGC ,RAID 5
[size=569G][features=1 queue_if_no_path][hwhandler=1 emc]
\_ round-robin 0 [prio=1][undef]
\_ 5:0:0:4 sdh 8:112 [undef][ready]
\_ round-robin 0 [prio=0][undef]
\_ 6:0:0:4 sdn 8:208 [undef][ready]
create: 36006016005f02100a65b331ab84fde11 DGC ,RAID 5
[size=1.2T][features=1 queue_if_no_path][hwhandler=1 emc]
\_ round-robin 0 [prio=1][undef]
\_ 5:0:0:5 sdi 8:128 [undef][ready]
\_ round-robin 0 [prio=0][undef]
\_ 6:0:0:5 sdo 8:224 [undef][ready]
Since it seems to recognize everything, I went ahead and created one multipath device:
Logapp root:~ 0$ multipath /dev/sdl
create: 36006016005f02100b0dfd619b94fde11 DGC ,RAID 5
[size=300G][features=1 queue_if_no_path][hwhandler=1 emc]
\_ round-robin 0 [prio=1][undef]
\_ 5:0:0:2 sdf 8:80 [undef][ready]
\_ round-robin 0 [prio=0][undef]
\_ 6:0:0:2 sdl 8:176 [undef][ready]
This created the device /dev/dm-3:
Logapp root:~ 0$ multipath -l
36006016005f02100b0dfd619b94fde11dm-3 DGC ,RAID 5
[size=300G][features=1 queue_if_no_path][hwhandler=1 emc]
\_ round-robin 0 [prio=0][enabled]
\_ 5:0:0:2 sdf 8:80 [active][undef]
\_ round-robin 0 [prio=0][enabled]
\_ 6:0:0:2 sdl 8:176 [active][undef]
The kernel panic happens when I try to access /dev/dm-3, like using kpartx:
Logapp root:~ 0$ kpartx /dev/dm-3
The kernel panic dumps the following to the console:
------------[ cut here ]------------
kernel BUG at block/cfq-iosched.c:2078!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/class/fc_transport/target6:0:0/node_name
Modules linked in: iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter max6650 hwmon_vid i2c
_piix4 i2c_dev coretemp bond0 i2c_i801 i2c_core qla2xxx
Pid: 1205, comm: kmpath_handlerd Not tainted (2.6.29.4-loglogic #2) ST2020_SAN
EIP: 0060:[<c02caa77>] EFLAGS: 00010046 CPU: 1
EIP is at cfq_put_request+0x47/0x50
EAX: 00000000 EBX: f76fc0a0 ECX: c02caa30 EDX: 00000001
ESI: f66efb1c EDI: f6454578 EBP: f687de9c ESP: f687de94
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kmpath_handlerd (pid: 1205, ti=f687c000 task=f752b540 task.ti=f687c000)
Stack:
f76fc0a0 00282e4f f687dea4 c02bdd83 f687debc c02c036f 00002000 f6454578
f76fc0a0 00000292 f687ded0 c02c06cc f6065d04 f6065c04 f76fc0a0 f687df34
c03bbf34 00000001 c481d4b4 c4819e00 f687def4 c0124cf8 f752b540 c0522c80
Call Trace:
[<c02bdd83>] ? elv_put_request+0x13/0x20
[<c02c036f>] ? __blk_put_request+0x7f/0x90
[<c02c06cc>] ? blk_put_request+0x2c/0x50
[<c03bbf34>] ? clariion_activate+0x114/0x420
[<c0124cf8>] ? dequeue_task_fair+0x28/0x40
[<c02ce032>] ? kobject_get+0x12/0x20
[<c03ba622>] ? scsi_dh_activate+0x92/0xa0
[<c0464593>] ? activate_path+0x43/0x160
[<c0464550>] ? activate_path+0x0/0x160
[<c013772d>] ? run_workqueue+0xad/0x140
[<c013809c>] ? worker_thread+0x5c/0xa0
[<c013aee0>] ? autoremove_wake_function+0x0/0x40
[<c0138040>] ? worker_thread+0x0/0xa0
[<c013abe2>] ? kthread+0x42/0x70
[<c013aba0>] ? kthread+0x0/0x70
[<c010398b>] ? kernel_thread_helper+0x7/0x1c
Code: 83 e8 01 89 44 96 2c 8b 43 6c 8b 40 10 e8 c2 8d ff ff 89 f0 c7 43 6c 00 00 00 00 c7 43 70 00 00 00 00 e8 3d ff ff
ff 5b 5e 5d c3 <0f> 0b eb fe 90 8d 74 26 00 55 89 e5 83 ec 08 89 1c 24 89 d3 89
EIP: [<c02caa77>] cfq_put_request+0x47/0x50 SS:ESP 0068:f687de94
---[ end trace 4efc3c49e4977b31 ]---
Looking at the code, this situation seems to be specifically marked as a kernel bug. Can anyone please shed some light on this? Thank you very much in advance for your time and help.
Sincerely,
Paul Lung--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
