Do not set max_id value received from FW. Once SAS transport layer is introduced max_id value is missleading to SCSI mid layer. Use max_id to infinite value. logic of can queue of scsi host is changed. --- Signed-off-by: Kashyap Desai <kashyap.desai@xxxxxxx> --- diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 936e35a..a63810c 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -4761,10 +4761,9 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* set 16 byte cdb's */ sh->max_cmd_len = 16; - - sh->max_id = ioc->pfacts[0].PortSCSIID; + sh->can_queue = min_t(int, ioc->req_depth - 10, sh->can_queue); + sh->max_id = -1; sh->max_lun = max_lun; - sh->transportt = mptsas_transport_template; /* Required entry. diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 1466a5a..0e402eb 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2290,7 +2290,10 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) else max_depth = MPT_SCSI_CMD_PER_DEV_LOW; } else - max_depth = MPT_SCSI_CMD_PER_DEV_HIGH; + max_depth = ioc->sh->can_queue; + + if (!sdev->tagged_supported) + max_depth = 1; if (qdepth > max_depth) qdepth = max_depth; -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
