Hello, recently I've acquired Infortrend EonStor A16U-G2421 array with 16x 500GB SATA drives inside. It is connected via: 04:00.0 SCSI storage controller: Adaptec AHA-2940U2/U2W to host running Fedora 12 with following kernel: 2.6.31-0.33.rc1.git2.fc12.x86_64 When I export LUN >2TB from array I got following errors: scsi 5:0:0:1: Direct-Access VW VRU1610 347G PQ: 0 ANSI: 5 scsi target5:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127) scsi5:A:0:1: Tagged Queuing enabled. Depth 4 sd 5:0:0:1: Attached scsi generic sg3 type 0 sd 5:0:0:1: [sdd] READ CAPACITY(16) failed sd 5:0:0:1: [sdd] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK sd 5:0:0:1: [sdd] Sense not available. sd 5:0:0:1: [sdd] 4294967296 512-byte logical blocks: (2.19 TB/2.00 TiB) sd 5:0:0:1: [sdd] Write Protect is off sd 5:0:0:1: [sdd] Mode Sense: 9b 00 00 08 sd 5:0:0:1: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:1: [sdd] READ CAPACITY(16) failed sd 5:0:0:1: [sdd] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK sd 5:0:0:1: [sdd] Sense not available. sdd: unknown partition table sd 5:0:0:1: [sdd] READ CAPACITY(16) failed sd 5:0:0:1: [sdd] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK sd 5:0:0:1: [sdd] Sense not available. sd 5:0:0:1: [sdd] Attached SCSI disk According to manufacturer, this array supports LUNs up to 64TB, although >2TB LUNs require enigmatic ,,support from OS side''. I was under impression that aic7xxx supports them, but it seems not true. What can I tweak on the Linux side to use 6TB volumes? (please keep CCs to me on reply) -- Tomasz Torcz "God, root, what's the difference?" xmpp: zdzichubg@xxxxxxxxx "God is more forgiving." -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html