http://bugzilla.kernel.org/show_bug.cgi?id=13594 --- Comment #7 from Matthew Wilcox <matthew@xxxxxx> 2009-06-22 12:04:31 --- On Sun, Jun 21, 2009 at 04:53:29PM -0400, Douglas Gilbert wrote: > As for the hiccup, I have noticed that with SAS (SCSI) > disks from Seagate there is a curious sound and a pause > before the response to LOG SENSE SCSI command (the > type the smartmontools uses on SCSI disks). > > Another annoyance is that the disk must be ready (i.e. > spun up) before MODE SENSE and LOG SENSE work, haven't > Seagate heard of flash :-) > SCSI standards permit that (i.e. only > a small number of commands have to work when the disk > is not ready) but you would think accessing metadata > given the disk has spun up once since power up could > be accomplished from RAM or flash. We've experienced similar problems at Intel with an LSI card and Intel SSDs (SATA, not SAS). This issue got pushed into the 'investigate later' category, as we were able to just disable smartd. I'll try and get some more information on this later. -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
