Re: SATA: link online but device misclassified

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

The drive I just bought:
SEAGATE 160GB SATA 7200RPM HDD

The other is a Western Digital 500GB.

The ATA controllers: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller.

To be honest, I'm not even too concerned about the link speed, I'm
more annoyed by the long timeout at boot time.

On Wed, Jun 10, 2009 at 10:34 PM, Matthew Wilcox<matthew@xxxxxx> wrote:
> On Wed, Jun 10, 2009 at 10:31:32PM +0200, Marc Bowes wrote:
>> Greetings,
>>
>> Firstly, I hope that the SCSI list is the correct place to ask about SATA.
>
> Not really, linux-ide is the preferred place.
>
>> I just got a new chipset (Gigabyte EP45-DQ6) courtesy of a
>> competition. This coincided with the death of a hard drive. I had to
>> reinstall my Gentoo system on the new hard drive, and hit this issue
>> when booting the newly configured Kernel (2.6.29-gentoo-r5):
>>
>> ata1: link is slow to respond, please be patient (ready=0)
>> ata1: softreset failed (device not ready)
>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> ata1: link online but device misclassified, retrying
>> ata1: link is slow to respond, please be patient (ready=0)
>> ata1: softreset failed (device not ready)
>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> ata1: link online but device misclassified, retrying
>> ata1: link is slow to respond, please be patient (ready=0)
>> ata1: softreset failed (device not ready)
>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> ata1: link online but device misclassified, retrying
>> ata1: limiting SATA link speed to 1.5 Gbps
>> ata1: softreset failed (device not ready)
>> ata1: SATA link up to 1.5 Gbps (SStatus 113 SControl 310)
>> ata1: link online but device misclassified, device detection might fail
>> ata2: link is slow to respond, please be patient (ready=0)
>> ata2: softreset failed (device not ready)
>> ... (as with ata1)
>>
>> This whole process takes a very long time (minutes) to finish. It
>> seems to be down-grading two of the four SATA-2 drives to SATA-1
>> speeds. The drives are actually SATA-2 drives, and appear to work (at
>> full speed) on my Windows 7 install.
>
> What drive model, what ATA controller, and have you checked you're really
> getting 250MB/s under Windows?
>
> --
> Matthew Wilcox                          Intel Open Source Technology Centre
> "Bill, look, we understand that you're interested in selling us this
> operating system, but compare it to ours.  We can't possibly take such
> a retrograde step."
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux