In case the onboard firmware is unable to be read or loaded for
operation, attempt to fallback to a limited-operational firmware
image stored in a different flash region. This will allow a user
to reflash and correct a board with proper operational firmware.
Signed-off-by: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_def.h | 2 ++
drivers/scsi/qla2xxx/qla_fw.h | 1 +
drivers/scsi/qla2xxx/qla_init.c | 33 +++++++++++++++++++++++++--------
drivers/scsi/qla2xxx/qla_os.c | 7 +++++++
drivers/scsi/qla2xxx/qla_sup.c | 3 +++
5 files changed, 38 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 4e846ae..88ddae0 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2223,6 +2223,7 @@ struct qla_hw_data {
uint32_t fac_supported :1;
uint32_t chip_reset_done :1;
uint32_t port0 :1;
+ uint32_t running_gold_fw :1;
} flags;
/* This spinlock is used to protect "io transactions", you must
@@ -2523,6 +2524,7 @@ struct qla_hw_data {
uint32_t flt_region_vpd;
uint32_t flt_region_nvram;
uint32_t flt_region_npiv_conf;
+ uint32_t flt_region_gold_fw;
/* Needed for BEACON */
uint16_t beacon_blink_led;
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 152d16c..9e56d4a 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1241,6 +1241,7 @@ struct qla_flt_header {
#define FLT_REG_HW_EVENT_1 0x1f
#define FLT_REG_NPIV_CONF_0 0x29
#define FLT_REG_NPIV_CONF_1 0x2a
+#define FLT_REG_GOLD_FW 0x2f
struct qla_flt_region {
uint32_t code;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a7abc10..34e6508 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3806,11 +3806,11 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
}
static int
-qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
+ uint32_t faddr)
{
int rval = QLA_SUCCESS;
int segments, fragment;
- uint32_t faddr;
uint32_t *dcode, dlen;
uint32_t risc_addr;
uint32_t risc_size;
@@ -3819,12 +3819,11 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
struct req_que *req = ha->req_q_map[0];
qla_printk(KERN_INFO, ha,
- "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+ "FW: Loading from flash (%x)...\n", faddr);
rval = QLA_SUCCESS;
segments = FA_RISC_CODE_SEGMENTS;
- faddr = ha->flt_region_fw;
dcode = (uint32_t *)req->ring;
*srisc_addr = 0;
@@ -4124,27 +4123,45 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
if (rval == QLA_SUCCESS)
return rval;
- return qla24xx_load_risc_flash(vha, srisc_addr);
+ return qla24xx_load_risc_flash(vha, srisc_addr,
+ vha->hw->flt_region_fw);
}
int
qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
int rval;
+ struct qla_hw_data *ha = vha->hw;
if (ql2xfwloadbin == 2)
- return qla24xx_load_risc(vha, srisc_addr);
+ goto try_blob_fw;
/*
* FW Load priority:
* 1) Firmware residing in flash.
* 2) Firmware via request-firmware interface (.bin file).
+ * 3) Golden-Firmware residing in flash -- limited operation.
*/
- rval = qla24xx_load_risc_flash(vha, srisc_addr);
+ rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_fw);
if (rval == QLA_SUCCESS)
return rval;
- return qla24xx_load_risc_blob(vha, srisc_addr);
+try_blob_fw:
+ rval = qla24xx_load_risc_blob(vha, srisc_addr);
+ if (rval == QLA_SUCCESS || !ha->flt_region_gold_fw)
+ return rval;
+
+ qla_printk(KERN_ERR, ha,
+ "FW: Attempting to fallback to golden firmware...\n");
+ rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_gold_fw);
+ if (rval != QLA_SUCCESS)
+ return rval;
+
+ qla_printk(KERN_ERR, ha,
+ "FW: Please update operational firmware...\n");
+ ha->flags.running_gold_fw = 1;
+
+ return rval;
}
void
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 181ed97..128b3d5 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1690,6 +1690,9 @@ qla2xxx_scan_start(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = shost_priv(shost);
+ if (vha->hw->flags.running_gold_fw)
+ return;
+
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
set_bit(RSCN_UPDATE, &vha->dpc_flags);
@@ -1962,6 +1965,9 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
"Can't create queues, falling back to single"
" queue mode\n");
+ if (ha->flags.running_gold_fw)
+ goto skip_dpc;
+
/*
* Startup the kernel thread for this host adapter
*/
@@ -1974,6 +1980,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
goto probe_failed;
}
+skip_dpc:
list_add_tail(&base_vha->list, &ha->vp_list);
base_vha->host->irq = ha->pdev->irq;
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index e239203..6260505 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -728,6 +728,9 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
if (!ha->flags.port0)
ha->flt_region_npiv_conf = start;
break;
+ case FLT_REG_GOLD_FW:
+ ha->flt_region_gold_fw = start;
+ break;
}
}
goto done;
--
1.6.3.1.244.gf9275
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
