Addition of SLI4 Interface - Queues - Part 1 of 2
Adds support for the new queues in the SLI-4 interface. There are :
- Work Queues - host-to-adapter for fast-path traffic
- Mailbox Queues - host-to-adapter for control (slow-path)
- Buffer Queues - host-to-adapter for posting buffers for async receive
- Completion Queues - adapter-to-host for posting async events,
completions for fast or slow patch work, receipt of async
receive traffic
- Event Queues - tied to MSI-X vectors, binds completion queues with
interrupts
These patches add the all the support code to tie into command submission
and response paths, updates the interrupt handling, etc.
Signed-off-by: James Smart <james.smart@xxxxxxxxxx>
---
lpfc_sli.c | 1721 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 1653 insertions(+), 68 deletions(-)
diff -upNr a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
--- a/drivers/scsi/lpfc/lpfc_sli.c 2009-05-22 13:16:40.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_sli.c 2009-05-22 13:18:00.000000000 -0400
@@ -70,6 +70,350 @@ typedef enum _lpfc_iocb_type {
LPFC_ABORT_IOCB
} lpfc_iocb_type;
+
+/* Provide function prototypes local to this module. */
+static int lpfc_sli_issue_mbox_s4(struct lpfc_hba *, LPFC_MBOXQ_t *,
+ uint32_t);
+static int lpfc_sli4_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *,
+ uint8_t *, uint32_t *);
+
+static IOCB_t *
+lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
+{
+ return &iocbq->iocb;
+}
+
+/**
+ * lpfc_sli4_wq_put - Put a Work Queue Entry on an Work Queue
+ * @q: The Work Queue to operate on.
+ * @wqe: The work Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
+{
+ union lpfc_wqe *temp_wqe = q->qe[q->host_index].wqe;
+ struct lpfc_register doorbell;
+ uint32_t host_index;
+
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+ return -ENOMEM;
+ /* set consumption flag every once in a while */
+ if (!((q->host_index + 1) % LPFC_RELEASE_NOTIFICATION_INTERVAL))
+ bf_set(lpfc_wqe_gen_wqec, &wqe->generic, 1);
+
+ lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
+
+ /* Update the host index before invoking device */
+ host_index = q->host_index;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+
+ /* Ring Doorbell */
+ doorbell.word0 = 0;
+ bf_set(lpfc_wq_doorbell_num_posted, &doorbell, 1);
+ bf_set(lpfc_wq_doorbell_index, &doorbell, host_index);
+ bf_set(lpfc_wq_doorbell_id, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.WQDBregaddr);
+ readl(q->phba->sli4_hba.WQDBregaddr); /* Flush */
+
+ return 0;
+}
+
+/**
+ * lpfc_sli4_wq_release - Updates internal hba index for WQ
+ * @q: The Work Queue to operate on.
+ * @index: The index to advance the hba index to.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * Work Queue Entries by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_wq_release(struct lpfc_queue *q, uint32_t index)
+{
+ uint32_t released = 0;
+
+ if (q->hba_index == index)
+ return 0;
+ do {
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ released++;
+ } while (q->hba_index != index);
+ return released;
+}
+
+/**
+ * lpfc_sli4_mq_put - Put a Mailbox Queue Entry on an Mailbox Queue
+ * @q: The Mailbox Queue to operate on.
+ * @wqe: The Mailbox Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @mqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_mq_put(struct lpfc_queue *q, struct lpfc_mqe *mqe)
+{
+ struct lpfc_mqe *temp_mqe = q->qe[q->host_index].mqe;
+ struct lpfc_register doorbell;
+ uint32_t host_index;
+
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+ return -ENOMEM;
+ lpfc_sli_pcimem_bcopy(mqe, temp_mqe, q->entry_size);
+ /* Save off the mailbox pointer for completion */
+ q->phba->mbox = (MAILBOX_t *)temp_mqe;
+
+ /* Update the host index before invoking device */
+ host_index = q->host_index;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+
+ /* Ring Doorbell */
+ doorbell.word0 = 0;
+ bf_set(lpfc_mq_doorbell_num_posted, &doorbell, 1);
+ bf_set(lpfc_mq_doorbell_id, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.MQDBregaddr);
+ readl(q->phba->sli4_hba.MQDBregaddr); /* Flush */
+ return 0;
+}
+
+/**
+ * lpfc_sli4_mq_release - Updates internal hba index for MQ
+ * @q: The Mailbox Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * a Mailbox Queue Entry by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_mq_release(struct lpfc_queue *q)
+{
+ /* Clear the mailbox pointer for completion */
+ q->phba->mbox = NULL;
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ return 1;
+}
+
+/**
+ * lpfc_sli4_eq_get - Gets the next valid EQE from a EQ
+ * @q: The Event Queue to get the first valid EQE from
+ *
+ * This routine will get the first valid Event Queue Entry from @q, update
+ * the queue's internal hba index, and return the EQE. If no valid EQEs are in
+ * the Queue (no more work to do), or the Queue is full of EQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_eqe *
+lpfc_sli4_eq_get(struct lpfc_queue *q)
+{
+ struct lpfc_eqe *eqe = q->qe[q->hba_index].eqe;
+
+ /* If the next EQE is not valid then we are done */
+ if (!bf_get(lpfc_eqe_valid, eqe))
+ return NULL;
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+ return NULL;
+
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ return eqe;
+}
+
+/**
+ * lpfc_sli4_eq_release - Indicates the host has finished processing an EQ
+ * @q: The Event Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Event Queue Entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the EQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of EQEs that were popped.
+ **/
+uint32_t
+lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
+{
+ uint32_t released = 0;
+ struct lpfc_eqe *temp_eqe;
+ struct lpfc_register doorbell;
+
+ /* while there are valid entries */
+ while (q->hba_index != q->host_index) {
+ temp_eqe = q->qe[q->host_index].eqe;
+ bf_set(lpfc_eqe_valid, temp_eqe, 0);
+ released++;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+ }
+ if (unlikely(released == 0 && !arm))
+ return 0;
+
+ /* ring doorbell for number popped */
+ doorbell.word0 = 0;
+ if (arm) {
+ bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+ bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
+ }
+ bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+ bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
+ bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ return released;
+}
+
+/**
+ * lpfc_sli4_cq_get - Gets the next valid CQE from a CQ
+ * @q: The Completion Queue to get the first valid CQE from
+ *
+ * This routine will get the first valid Completion Queue Entry from @q, update
+ * the queue's internal hba index, and return the CQE. If no valid CQEs are in
+ * the Queue (no more work to do), or the Queue is full of CQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_cqe *
+lpfc_sli4_cq_get(struct lpfc_queue *q)
+{
+ struct lpfc_cqe *cqe;
+
+ /* If the next CQE is not valid then we are done */
+ if (!bf_get(lpfc_cqe_valid, q->qe[q->hba_index].cqe))
+ return NULL;
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+ return NULL;
+
+ cqe = q->qe[q->hba_index].cqe;
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ return cqe;
+}
+
+/**
+ * lpfc_sli4_cq_release - Indicates the host has finished processing a CQ
+ * @q: The Completion Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Completion queue entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the CQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of CQEs that were released.
+ **/
+uint32_t
+lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
+{
+ uint32_t released = 0;
+ struct lpfc_cqe *temp_qe;
+ struct lpfc_register doorbell;
+
+ /* while there are valid entries */
+ while (q->hba_index != q->host_index) {
+ temp_qe = q->qe[q->host_index].cqe;
+ bf_set(lpfc_cqe_valid, temp_qe, 0);
+ released++;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+ }
+ if (unlikely(released == 0 && !arm))
+ return 0;
+
+ /* ring doorbell for number popped */
+ doorbell.word0 = 0;
+ if (arm)
+ bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+ bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+ bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
+ bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ return released;
+}
+
+/**
+ * lpfc_sli4_rq_put - Put a Receive Buffer Queue Entry on a Receive Queue
+ * @q: The Header Receive Queue to operate on.
+ * @wqe: The Receive Queue Entry to put on the Receive queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Receive Queue Doorbell to signal the
+ * HBA to start processing the Receive Queue Entry. This function returns the
+ * index that the rqe was copied to if successful. If no entries are available
+ * on @q then this function will return -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static int
+lpfc_sli4_rq_put(struct lpfc_queue *hq, struct lpfc_queue *dq,
+ struct lpfc_rqe *hrqe, struct lpfc_rqe *drqe)
+{
+ struct lpfc_rqe *temp_hrqe = hq->qe[hq->host_index].rqe;
+ struct lpfc_rqe *temp_drqe = dq->qe[dq->host_index].rqe;
+ struct lpfc_register doorbell;
+ int put_index = hq->host_index;
+
+ if (hq->type != LPFC_HRQ || dq->type != LPFC_DRQ)
+ return -EINVAL;
+ if (hq->host_index != dq->host_index)
+ return -EINVAL;
+ /* If the host has not yet processed the next entry then we are done */
+ if (((hq->host_index + 1) % hq->entry_count) == hq->hba_index)
+ return -EBUSY;
+ lpfc_sli_pcimem_bcopy(hrqe, temp_hrqe, hq->entry_size);
+ lpfc_sli_pcimem_bcopy(drqe, temp_drqe, dq->entry_size);
+
+ /* Update the host index to point to the next slot */
+ hq->host_index = ((hq->host_index + 1) % hq->entry_count);
+ dq->host_index = ((dq->host_index + 1) % dq->entry_count);
+
+ /* Ring The Header Receive Queue Doorbell */
+ if (!(hq->host_index % LPFC_RQ_POST_BATCH)) {
+ doorbell.word0 = 0;
+ bf_set(lpfc_rq_doorbell_num_posted, &doorbell,
+ LPFC_RQ_POST_BATCH);
+ bf_set(lpfc_rq_doorbell_id, &doorbell, hq->queue_id);
+ writel(doorbell.word0, hq->phba->sli4_hba.RQDBregaddr);
+ }
+ return put_index;
+}
+
+/**
+ * lpfc_sli4_rq_release - Updates internal hba index for RQ
+ * @q: The Header Receive Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * one Receive Queue Entry by the HBA. When the HBA indicates that it has
+ * consumed an entry the host calls this function to update the queue's
+ * internal pointers. This routine returns the number of entries that were
+ * consumed by the HBA.
+ **/
+static uint32_t
+lpfc_sli4_rq_release(struct lpfc_queue *hq, struct lpfc_queue *dq)
+{
+ if ((hq->type != LPFC_HRQ) || (dq->type != LPFC_DRQ))
+ return 0;
+ hq->hba_index = ((hq->hba_index + 1) % hq->entry_count);
+ dq->hba_index = ((dq->hba_index + 1) % dq->entry_count);
+ return 1;
+}
+
/**
* lpfc_cmd_iocb - Get next command iocb entry in the ring
* @phba: Pointer to HBA context object.
@@ -215,6 +559,59 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba
}
/**
+ * __lpfc_sli_release_iocbq_s4 - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ * The sqlq structure that holds the xritag and phys and virtual
+ * mappings for the scatter gather list is retrieved from the
+ * active array of sglq. The get of the sglq pointer also clears
+ * the entry in the array. If the status of the IO indiactes that
+ * this IO was aborted then the sglq entry it put on the
+ * lpfc_abts_els_sgl_list until the CQ_ABORTED_XRI is received. If the
+ * IO has good status or fails for any other reason then the sglq
+ * entry is added to the free list (lpfc_sgl_list).
+ **/
+static void
+__lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+ struct lpfc_sglq *sglq;
+ size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
+ unsigned long iflag;
+
+ if (iocbq->sli4_xritag == NO_XRI)
+ sglq = NULL;
+ else
+ sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
+ if (sglq) {
+ if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED
+ || ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
+ && (iocbq->iocb.un.ulpWord[4]
+ == IOERR_SLI_ABORTED))) {
+ spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock,
+ iflag);
+ list_add(&sglq->list,
+ &phba->sli4_hba.lpfc_abts_els_sgl_list);
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_sgl_list_lock, iflag);
+ } else
+ list_add(&sglq->list, &phba->sli4_hba.lpfc_sgl_list);
+ }
+
+
+ /*
+ * Clean all volatile data fields, preserve iotag and node struct.
+ */
+ memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+ iocbq->sli4_xritag = NO_XRI;
+ list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+}
+
+/**
* __lpfc_sli_release_iocbq_s3 - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
@@ -959,6 +1356,37 @@ lpfc_sli_hbq_to_firmware_s3(struct lpfc_
return -ENOMEM;
}
+/**
+ * lpfc_sli_hbq_to_firmware_s4 - Post the hbq buffer to SLI4 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post an RQE to the SLI4
+ * firmware. If able to post the RQE to the RQ it will queue the hbq entry to
+ * the hbq_buffer_list and return zero, otherwise it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s4(struct lpfc_hba *phba, uint32_t hbqno,
+ struct hbq_dmabuf *hbq_buf)
+{
+ int rc;
+ struct lpfc_rqe hrqe;
+ struct lpfc_rqe drqe;
+
+ hrqe.address_lo = putPaddrLow(hbq_buf->hbuf.phys);
+ hrqe.address_hi = putPaddrHigh(hbq_buf->hbuf.phys);
+ drqe.address_lo = putPaddrLow(hbq_buf->dbuf.phys);
+ drqe.address_hi = putPaddrHigh(hbq_buf->dbuf.phys);
+ rc = lpfc_sli4_rq_put(phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+ &hrqe, &drqe);
+ if (rc < 0)
+ return rc;
+ hbq_buf->tag = rc;
+ list_add_tail(&hbq_buf->dbuf.list, &phba->hbqs[hbqno].hbq_buffer_list);
+ return 0;
+}
+
/* HBQ for ELS and CT traffic. */
static struct lpfc_hbq_init lpfc_els_hbq = {
.rn = 1,
@@ -2575,6 +3003,36 @@ lpfc_sli_handle_slow_ring_event_s3(struc
}
/**
+ * lpfc_sli_handle_slow_ring_event_s4 - Handle SLI4 slow-path els events
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a pending
+ * ELS response iocb on the driver internal slow-path response iocb worker
+ * queue. The caller does not hold any lock. The function will remove each
+ * response iocb from the response worker queue and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s4(struct lpfc_hba *phba,
+ struct lpfc_sli_ring *pring, uint32_t mask)
+{
+ struct lpfc_iocbq *irspiocbq;
+ unsigned long iflag;
+
+ while (!list_empty(&phba->sli4_hba.sp_rspiocb_work_queue)) {
+ /* Get the response iocb from the head of work queue */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ list_remove_head(&phba->sli4_hba.sp_rspiocb_work_queue,
+ irspiocbq, struct lpfc_iocbq, list);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ /* Process the response iocb */
+ lpfc_sli_sp_handle_rspiocb(phba, pring, irspiocbq);
+ }
+}
+
+/**
* lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
@@ -3376,6 +3834,26 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba
}
/**
+ * lpfc_sli4_rb_setup - Initialize and post RBs to HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called during the SLI initialization to configure
+ * all the HBQs and post buffers to the HBQ. The caller is not
+ * required to hold any locks. This function will return zero if successful
+ * else it will return negative error code.
+ **/
+static int
+lpfc_sli4_rb_setup(struct lpfc_hba *phba)
+{
+ phba->hbq_in_use = 1;
+ phba->hbqs[0].entry_count = lpfc_hbq_defs[0]->entry_count;
+ phba->hbq_count = 1;
+ /* Initially populate or replenish the HBQs */
+ lpfc_sli_hbqbuf_init_hbqs(phba, 0);
+ return 0;
+}
+
+/**
* lpfc_sli_config_port - Issue config port mailbox command
* @phba: Pointer to HBA context object.
* @sli_mode: sli mode - 2/3
@@ -5130,99 +5608,545 @@ __lpfc_sli_issue_iocb_s3(struct lpfc_hba
}
/**
- * __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
+ * lpfc_sli4_bpl2sgl - Convert the bpl/bde to a sgl.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @sglq: Pointer to the scatter gather queue object.
*
- * This routine wraps the actual lockless version for issusing IOCB function
- * pointer from the lpfc_hba struct.
+ * This routine converts the bpl or bde that is in the IOCB
+ * to a sgl list for the sli4 hardware. The physical address
+ * of the bpl/bde is converted back to a virtual address.
+ * If the IOCB contains a BPL then the list of BDE's is
+ * converted to sli4_sge's. If the IOCB contains a single
+ * BDE then it is converted to a single sli_sge.
+ * The IOCB is still in cpu endianess so the contents of
+ * the bpl can be used without byte swapping.
*
- * Return codes:
- * IOCB_ERROR - Error
- * IOCB_SUCCESS - Success
- * IOCB_BUSY - Busy
- **/
-static inline int
-__lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
- struct lpfc_iocbq *piocb, uint32_t flag)
-{
- return phba->__lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
-}
+ * Returns valid XRI = Success, NO_XRI = Failure.
+**/
+static uint16_t
+lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
+ struct lpfc_sglq *sglq)
+{
+ uint16_t xritag = NO_XRI;
+ struct ulp_bde64 *bpl = NULL;
+ struct ulp_bde64 bde;
+ struct sli4_sge *sgl = NULL;
+ IOCB_t *icmd;
+ int numBdes = 0;
+ int i = 0;
-/**
- * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
- * @phba: The hba struct for which this call is being executed.
- * @dev_grp: The HBA PCI-Device group number.
- *
- * This routine sets up the SLI interface API function jump table in @phba
- * struct.
- * Returns: 0 - success, -ENODEV - failure.
- **/
-int
-lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
-{
+ if (!piocbq || !sglq)
+ return xritag;
- switch (dev_grp) {
- case LPFC_PCI_DEV_LP:
- phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
- phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
- break;
- default:
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1419 Invalid HBA PCI-device group: 0x%x\n",
- dev_grp);
- return -ENODEV;
- break;
+ sgl = (struct sli4_sge *)sglq->sgl;
+ icmd = &piocbq->iocb;
+ if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+ numBdes = icmd->un.genreq64.bdl.bdeSize /
+ sizeof(struct ulp_bde64);
+ /* The addrHigh and addrLow fields within the IOCB
+ * have not been byteswapped yet so there is no
+ * need to swap them back.
+ */
+ bpl = (struct ulp_bde64 *)
+ ((struct lpfc_dmabuf *)piocbq->context3)->virt;
+
+ if (!bpl)
+ return xritag;
+
+ for (i = 0; i < numBdes; i++) {
+ /* Should already be byte swapped. */
+ sgl->addr_hi = bpl->addrHigh;
+ sgl->addr_lo = bpl->addrLow;
+ /* swap the size field back to the cpu so we
+ * can assign it to the sgl.
+ */
+ bde.tus.w = le32_to_cpu(bpl->tus.w);
+ bf_set(lpfc_sli4_sge_len, sgl, bde.tus.f.bdeSize);
+ if ((i+1) == numBdes)
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ else
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ bpl++;
+ sgl++;
+ }
+ } else if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BDE_64) {
+ /* The addrHigh and addrLow fields of the BDE have not
+ * been byteswapped yet so they need to be swapped
+ * before putting them in the sgl.
+ */
+ sgl->addr_hi =
+ cpu_to_le32(icmd->un.genreq64.bdl.addrHigh);
+ sgl->addr_lo =
+ cpu_to_le32(icmd->un.genreq64.bdl.addrLow);
+ bf_set(lpfc_sli4_sge_len, sgl,
+ icmd->un.genreq64.bdl.bdeSize);
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
}
- phba->lpfc_get_iocb_from_iocbq = lpfc_get_iocb_from_iocbq;
- return 0;
+ return sglq->sli4_xritag;
}
/**
- * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
+ * lpfc_sli4_scmd_to_wqidx_distr - scsi command to SLI4 WQ index distribution
* @phba: Pointer to HBA context object.
- * @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to command iocb.
- * @flag: Flag indicating if this command can be put into txq.
*
- * lpfc_sli_issue_iocb is a wrapper around __lpfc_sli_issue_iocb
- * function. This function gets the hbalock and calls
- * __lpfc_sli_issue_iocb function and will return the error returned
- * by __lpfc_sli_issue_iocb function. This wrapper is used by
- * functions which do not hold hbalock.
+ * This routine performs a round robin SCSI command to SLI4 FCP WQ index
+ * distribution.
+ *
+ * Return: index into SLI4 fast-path FCP queue index.
**/
-int
-lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
- struct lpfc_iocbq *piocb, uint32_t flag)
+static uint32_t
+lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba, struct lpfc_iocbq *piocb)
{
- unsigned long iflags;
- int rc;
+ static uint32_t fcp_qidx;
- spin_lock_irqsave(&phba->hbalock, iflags);
- rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
- spin_unlock_irqrestore(&phba->hbalock, iflags);
-
- return rc;
+ return fcp_qidx++ % phba->cfg_fcp_wq_count;
}
/**
- * lpfc_extra_ring_setup - Extra ring setup function
+ * lpfc_sli_iocb2wqe - Convert the IOCB to a work queue entry.
* @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @wqe: Pointer to the work queue entry.
*
- * This function is called while driver attaches with the
- * HBA to setup the extra ring. The extra ring is used
- * only when driver needs to support target mode functionality
- * or IP over FC functionalities.
+ * This routine converts the iocb command to its Work Queue Entry
+ * equivalent. The wqe pointer should not have any fields set when
+ * this routine is called because it will memcpy over them.
+ * This routine does not set the CQ_ID or the WQEC bits in the
+ * wqe.
*
- * This function is called with no lock held.
+ * Returns: 0 = Success, IOCB_ERROR = Failure.
**/
static int
-lpfc_extra_ring_setup( struct lpfc_hba *phba)
+lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
+ union lpfc_wqe *wqe)
{
- struct lpfc_sli *psli;
- struct lpfc_sli_ring *pring;
+ uint32_t payload_len = 0;
+ uint8_t ct = 0;
+ uint32_t fip;
+ uint32_t abort_tag;
+ uint8_t command_type = ELS_COMMAND_NON_FIP;
+ uint8_t cmnd;
+ uint16_t xritag;
+ struct ulp_bde64 *bpl = NULL;
+
+ fip = bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags);
+ /* The fcp commands will set command type */
+ if ((!(iocbq->iocb_flag & LPFC_IO_FCP)) && (!fip))
+ command_type = ELS_COMMAND_NON_FIP;
+ else if (!(iocbq->iocb_flag & LPFC_IO_FCP))
+ command_type = ELS_COMMAND_FIP;
+ else if (iocbq->iocb_flag & LPFC_IO_FCP)
+ command_type = FCP_COMMAND;
+ else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2019 Invalid cmd 0x%x\n",
+ iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ }
+ /* Some of the fields are in the right position already */
+ memcpy(wqe, &iocbq->iocb, sizeof(union lpfc_wqe));
+ abort_tag = (uint32_t) iocbq->iotag;
+ xritag = iocbq->sli4_xritag;
+ wqe->words[7] = 0; /* The ct field has moved so reset */
+ /* words0-2 bpl convert bde */
+ if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+ bpl = (struct ulp_bde64 *)
+ ((struct lpfc_dmabuf *)iocbq->context3)->virt;
+ if (!bpl)
+ return IOCB_ERROR;
- psli = &phba->sli;
+ /* Should already be byte swapped. */
+ wqe->generic.bde.addrHigh = le32_to_cpu(bpl->addrHigh);
+ wqe->generic.bde.addrLow = le32_to_cpu(bpl->addrLow);
+ /* swap the size field back to the cpu so we
+ * can assign it to the sgl.
+ */
+ wqe->generic.bde.tus.w = le32_to_cpu(bpl->tus.w);
+ payload_len = wqe->generic.bde.tus.f.bdeSize;
+ } else
+ payload_len = iocbq->iocb.un.fcpi64.bdl.bdeSize;
- /* Adjust cmd/rsp ring iocb entries more evenly */
+ iocbq->iocb.ulpIoTag = iocbq->iotag;
+ cmnd = iocbq->iocb.ulpCommand;
+
+ switch (iocbq->iocb.ulpCommand) {
+ case CMD_ELS_REQUEST64_CR:
+ if (!iocbq->iocb.ulpLe) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2007 Only Limited Edition cmd Format"
+ " supported 0x%x\n",
+ iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ }
+ wqe->els_req.payload_len = payload_len;
+ /* Els_reguest64 has a TMO */
+ bf_set(wqe_tmo, &wqe->els_req.wqe_com,
+ iocbq->iocb.ulpTimeout);
+ /* Need a VF for word 4 set the vf bit*/
+ bf_set(els_req64_vf, &wqe->els_req, 0);
+ /* And a VFID for word 12 */
+ bf_set(els_req64_vfid, &wqe->els_req, 0);
+ /*
+ * Set ct field to 3, indicates that the context_tag field
+ * contains the FCFI and remote N_Port_ID is
+ * in word 5.
+ */
+
+ ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+ bf_set(lpfc_wqe_gen_context, &wqe->generic,
+ iocbq->iocb.ulpContext);
+
+ if (iocbq->vport->fc_myDID != 0) {
+ bf_set(els_req64_sid, &wqe->els_req,
+ iocbq->vport->fc_myDID);
+ bf_set(els_req64_sp, &wqe->els_req, 1);
+ }
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic, ct);
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+ /* CCP CCPE PV PRI in word10 were set in the memcpy */
+ break;
+ case CMD_XMIT_SEQUENCE64_CR:
+ /* word3 iocb=io_tag32 wqe=payload_offset */
+ /* payload offset used for multilpe outstanding
+ * sequences on the same exchange
+ */
+ wqe->words[3] = 0;
+ /* word4 relative_offset memcpy */
+ /* word5 r_ctl/df_ctl memcpy */
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+ wqe->xmit_sequence.xmit_len = payload_len;
+ break;
+ case CMD_XMIT_BCAST64_CN:
+ /* word3 iocb=iotag32 wqe=payload_len */
+ wqe->words[3] = 0; /* no definition for this in wqe */
+ /* word4 iocb=rsvd wqe=rsvd */
+ /* word5 iocb=rctl/type/df_ctl wqe=rctl/type/df_ctl memcpy */
+ /* word6 iocb=ctxt_tag/io_tag wqe=ctxt_tag/xri */
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+ ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+ break;
+ case CMD_FCP_IWRITE64_CR:
+ command_type = FCP_COMMAND_DATA_OUT;
+ /* The struct for wqe fcp_iwrite has 3 fields that are somewhat
+ * confusing.
+ * word3 is payload_len: byte offset to the sgl entry for the
+ * fcp_command.
+ * word4 is total xfer len, same as the IOCB->ulpParameter.
+ * word5 is initial xfer len 0 = wait for xfer-ready
+ */
+
+ /* Always wait for xfer-ready before sending data */
+ wqe->fcp_iwrite.initial_xfer_len = 0;
+ /* word 4 (xfer length) should have been set on the memcpy */
+
+ /* allow write to fall through to read */
+ case CMD_FCP_IREAD64_CR:
+ /* FCP_CMD is always the 1st sgl entry */
+ wqe->fcp_iread.payload_len =
+ payload_len + sizeof(struct fcp_rsp);
+
+ /* word 4 (xfer length) should have been set on the memcpy */
+
+ bf_set(lpfc_wqe_gen_erp, &wqe->generic,
+ iocbq->iocb.ulpFCP2Rcvy);
+ bf_set(lpfc_wqe_gen_lnk, &wqe->generic, iocbq->iocb.ulpXS);
+ /* The XC bit and the XS bit are similar. The driver never
+ * tracked whether or not the exchange was previouslly open.
+ * XC = Exchange create, 0 is create. 1 is already open.
+ * XS = link cmd: 1 do not close the exchange after command.
+ * XS = 0 close exchange when command completes.
+ * The only time we would not set the XC bit is when the XS bit
+ * is set and we are sending our 2nd or greater command on
+ * this exchange.
+ */
+
+ /* ALLOW read & write to fall through to ICMD64 */
+ case CMD_FCP_ICMND64_CR:
+ /* Always open the exchange */
+ bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
+
+ wqe->words[10] &= 0xffff0000; /* zero out ebde count */
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+ break;
+ case CMD_GEN_REQUEST64_CR:
+ /* word3 command length is described as byte offset to the
+ * rsp_data. Would always be 16, sizeof(struct sli4_sge)
+ * sgl[0] = cmnd
+ * sgl[1] = rsp.
+ *
+ */
+ wqe->gen_req.command_len = payload_len;
+ /* Word4 parameter copied in the memcpy */
+ /* Word5 [rctl, type, df_ctl, la] copied in memcpy */
+ /* word6 context tag copied in memcpy */
+ if (iocbq->iocb.ulpCt_h || iocbq->iocb.ulpCt_l) {
+ ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2015 Invalid CT %x command 0x%x\n",
+ ct, iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ }
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic, 0);
+ bf_set(wqe_tmo, &wqe->gen_req.wqe_com,
+ iocbq->iocb.ulpTimeout);
+
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+ command_type = OTHER_COMMAND;
+ break;
+ case CMD_XMIT_ELS_RSP64_CX:
+ /* words0-2 BDE memcpy */
+ /* word3 iocb=iotag32 wqe=rsvd */
+ wqe->words[3] = 0;
+ /* word4 iocb=did wge=rsvd. */
+ wqe->words[4] = 0;
+ /* word5 iocb=rsvd wge=did */
+ bf_set(wqe_els_did, &wqe->xmit_els_rsp.wqe_dest,
+ iocbq->iocb.un.elsreq64.remoteID);
+
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+ ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+ bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
+ if (!iocbq->iocb.ulpCt_h && iocbq->iocb.ulpCt_l)
+ bf_set(lpfc_wqe_gen_context, &wqe->generic,
+ iocbq->vport->vpi + phba->vpi_base);
+ command_type = OTHER_COMMAND;
+ break;
+ case CMD_CLOSE_XRI_CN:
+ case CMD_ABORT_XRI_CN:
+ case CMD_ABORT_XRI_CX:
+ /* words 0-2 memcpy should be 0 rserved */
+ /* port will send abts */
+ if (iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+ /*
+ * The link is down so the fw does not need to send abts
+ * on the wire.
+ */
+ bf_set(abort_cmd_ia, &wqe->abort_cmd, 1);
+ else
+ bf_set(abort_cmd_ia, &wqe->abort_cmd, 0);
+ bf_set(abort_cmd_criteria, &wqe->abort_cmd, T_XRI_TAG);
+ abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+ wqe->words[5] = 0;
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+ ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+ abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+ wqe->generic.abort_tag = abort_tag;
+ /*
+ * The abort handler will send us CMD_ABORT_XRI_CN or
+ * CMD_CLOSE_XRI_CN and the fw only accepts CMD_ABORT_XRI_CX
+ */
+ bf_set(lpfc_wqe_gen_command, &wqe->generic, CMD_ABORT_XRI_CX);
+ cmnd = CMD_ABORT_XRI_CX;
+ command_type = OTHER_COMMAND;
+ xritag = 0;
+ break;
+ case CMD_XRI_ABORTED_CX:
+ case CMD_CREATE_XRI_CR: /* Do we expect to use this? */
+ /* words0-2 are all 0's no bde */
+ /* word3 and word4 are rsvrd */
+ wqe->words[3] = 0;
+ wqe->words[4] = 0;
+ /* word5 iocb=rsvd wge=did */
+ /* There is no remote port id in the IOCB? */
+ /* Let this fall through and fail */
+ case CMD_IOCB_FCP_IBIDIR64_CR: /* bidirectional xfer */
+ case CMD_FCP_TSEND64_CX: /* Target mode send xfer-ready */
+ case CMD_FCP_TRSP64_CX: /* Target mode rcv */
+ case CMD_FCP_AUTO_TRSP_CX: /* Auto target rsp */
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2014 Invalid command 0x%x\n",
+ iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ break;
+
+ }
+ bf_set(lpfc_wqe_gen_xri, &wqe->generic, xritag);
+ bf_set(lpfc_wqe_gen_request_tag, &wqe->generic, iocbq->iotag);
+ wqe->generic.abort_tag = abort_tag;
+ bf_set(lpfc_wqe_gen_cmd_type, &wqe->generic, command_type);
+ bf_set(lpfc_wqe_gen_command, &wqe->generic, cmnd);
+ bf_set(lpfc_wqe_gen_class, &wqe->generic, iocbq->iocb.ulpClass);
+ bf_set(lpfc_wqe_gen_cq_id, &wqe->generic, LPFC_WQE_CQ_ID_DEFAULT);
+
+ return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb_s4 - SLI4 device lockless ver of lpfc_sli_issue_iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue iocb on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_iocb_s4 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-4 interface spec.
+ *
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ struct lpfc_sglq *sglq;
+ uint16_t xritag;
+ union lpfc_wqe wqe;
+ struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
+ uint32_t fcp_wqidx;
+
+ if (piocb->sli4_xritag == NO_XRI) {
+ if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
+ piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+ sglq = NULL;
+ else {
+ sglq = __lpfc_sli_get_sglq(phba);
+ if (!sglq)
+ return IOCB_ERROR;
+ piocb->sli4_xritag = sglq->sli4_xritag;
+ }
+ } else if (piocb->iocb_flag & LPFC_IO_FCP) {
+ sglq = NULL; /* These IO's already have an XRI and
+ * a mapped sgl.
+ */
+ } else {
+ /* This is a continuation of a commandi,(CX) so this
+ * sglq is on the active list
+ */
+ sglq = __lpfc_get_active_sglq(phba, piocb->sli4_xritag);
+ if (!sglq)
+ return IOCB_ERROR;
+ }
+
+ if (sglq) {
+ xritag = lpfc_sli4_bpl2sgl(phba, piocb, sglq);
+ if (xritag != sglq->sli4_xritag)
+ return IOCB_ERROR;
+ }
+
+ if (lpfc_sli4_iocb2wqe(phba, piocb, &wqe))
+ return IOCB_ERROR;
+
+ if (piocb->iocb_flag & LPFC_IO_FCP) {
+ fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba, piocb);
+ if (lpfc_sli4_wq_put(phba->sli4_hba.fcp_wq[fcp_wqidx], &wqe))
+ return IOCB_ERROR;
+ } else {
+ if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, &wqe))
+ return IOCB_ERROR;
+ }
+ lpfc_sli_ringtxcmpl_put(phba, pring, piocb);
+
+ return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
+ *
+ * This routine wraps the actual lockless version for issusing IOCB function
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * IOCB_ERROR - Error
+ * IOCB_SUCCESS - Success
+ * IOCB_BUSY - Busy
+ **/
+static inline int
+__lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ return phba->__lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+}
+
+/**
+ * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SLI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
+ phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s4;
+ phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1419 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ phba->lpfc_get_iocb_from_iocbq = lpfc_get_iocb_from_iocbq;
+ return 0;
+}
+
+/**
+ * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * lpfc_sli_issue_iocb is a wrapper around __lpfc_sli_issue_iocb
+ * function. This function gets the hbalock and calls
+ * __lpfc_sli_issue_iocb function and will return the error returned
+ * by __lpfc_sli_issue_iocb function. This wrapper is used by
+ * functions which do not hold hbalock.
+ **/
+int
+lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ unsigned long iflags;
+ int rc;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ return rc;
+}
+
+/**
+ * lpfc_extra_ring_setup - Extra ring setup function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called while driver attaches with the
+ * HBA to setup the extra ring. The extra ring is used
+ * only when driver needs to support target mode functionality
+ * or IP over FC functionalities.
+ *
+ * This function is called with no lock held.
+ **/
+static int
+lpfc_extra_ring_setup( struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli;
+ struct lpfc_sli_ring *pring;
+
+ psli = &phba->sli;
+
+ /* Adjust cmd/rsp ring iocb entries more evenly */
/* Take some away from the FCP ring */
pring = &psli->ring[psli->fcp_ring];
@@ -7152,3 +8076,664 @@ lpfc_sli_intr_handler(int irq, void *dev
/* Return device-level interrupt handling status */
return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc;
} /* lpfc_sli_intr_handler */
+
+/**
+ * lpfc_sli4_fcp_xri_abort_event_proc - Process fcp xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 FCP abort XRI events.
+ **/
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+
+ /* First, declare the fcp xri abort event has been handled */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~FCP_XRI_ABORT_EVENT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, handle all the fcp xri abort events */
+ while (!list_empty(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue)) {
+ /* Get the first event from the head of the event queue */
+ spin_lock_irq(&phba->hbalock);
+ list_remove_head(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+ cq_event, struct lpfc_cq_event, list);
+ spin_unlock_irq(&phba->hbalock);
+ /* Notify aborted XRI for FCP work queue */
+ lpfc_sli4_fcp_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+ /* Free the event processed back to the free pool */
+ lpfc_sli4_cq_event_release(phba, cq_event);
+ }
+}
+
+/**
+ * lpfc_sli4_els_xri_abort_event_proc - Process els xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 els abort xri events.
+ **/
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+
+ /* First, declare the els xri abort event has been handled */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~ELS_XRI_ABORT_EVENT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, handle all the els xri abort events */
+ while (!list_empty(&phba->sli4_hba.sp_els_xri_aborted_work_queue)) {
+ /* Get the first event from the head of the event queue */
+ spin_lock_irq(&phba->hbalock);
+ list_remove_head(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+ cq_event, struct lpfc_cq_event, list);
+ spin_unlock_irq(&phba->hbalock);
+ /* Notify aborted XRI for ELS work queue */
+ lpfc_sli4_els_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+ /* Free the event processed back to the free pool */
+ lpfc_sli4_cq_event_release(phba, cq_event);
+ }
+}
+
+static void
+lpfc_sli4_iocb_param_transfer(struct lpfc_iocbq *pIocbIn,
+ struct lpfc_iocbq *pIocbOut,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ size_t offset = offsetof(struct lpfc_iocbq, iocb);
+
+ memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
+ sizeof(struct lpfc_iocbq) - offset);
+ memset(&pIocbIn->sli4_info, 0,
+ sizeof(struct lpfc_sli4_rspiocb_info));
+ /* Map WCQE parameters into irspiocb parameters */
+ pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe);
+ if (pIocbOut->iocb_flag & LPFC_IO_FCP)
+ if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
+ pIocbIn->iocb.un.fcpi.fcpi_parm =
+ pIocbOut->iocb.un.fcpi.fcpi_parm -
+ wcqe->total_data_placed;
+ else
+ pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+ else
+ pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+ /* Load in additional WCQE parameters */
+ pIocbIn->sli4_info.hw_status = bf_get(lpfc_wcqe_c_hw_status, wcqe);
+ pIocbIn->sli4_info.bfield = 0;
+ if (bf_get(lpfc_wcqe_c_xb, wcqe))
+ pIocbIn->sli4_info.bfield |= LPFC_XB;
+ if (bf_get(lpfc_wcqe_c_pv, wcqe)) {
+ pIocbIn->sli4_info.bfield |= LPFC_PV;
+ pIocbIn->sli4_info.priority =
+ bf_get(lpfc_wcqe_c_priority, wcqe);
+ }
+}
+
+/**
+ * lpfc_sli4_sp_handle_els_wcqe - Handle els work-queue completion event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an ELS work-queue completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_els_wcqe(struct lpfc_hba *phba,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
+ struct lpfc_iocbq *cmdiocbq;
+ struct lpfc_iocbq *irspiocbq;
+ unsigned long iflags;
+ bool workposted = false;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pring->stats.iocb_event++;
+ /* Look up the ELS command IOCB and create pseudo response IOCB */
+ cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ if (unlikely(!cmdiocbq)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0386 ELS complete with no corresponding "
+ "cmdiocb: iotag (%d)\n",
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ return workposted;
+ }
+
+ /* Fake the irspiocbq and copy necessary response information */
+ irspiocbq = lpfc_sli_get_iocbq(phba);
+ if (!irspiocbq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0387 Failed to allocate an iocbq\n");
+ return workposted;
+ }
+ lpfc_sli4_iocb_param_transfer(irspiocbq, cmdiocbq, wcqe);
+
+ /* Add the irspiocb to the response IOCB work list */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&irspiocbq->list, &phba->sli4_hba.sp_rspiocb_work_queue);
+ /* Indicate ELS ring attention */
+ phba->work_ha |= (HA_R0ATT << (4*LPFC_ELS_RING));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rel_wcqe - Handle slow-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles slow-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_sp_handle_rel_wcqe(struct lpfc_hba *phba,
+ struct lpfc_wcqe_release *wcqe)
+{
+ /* Check for the slow-path ELS work queue */
+ if (bf_get(lpfc_wcqe_r_wq_id, wcqe) == phba->sli4_hba.els_wq->queue_id)
+ lpfc_sli4_wq_release(phba->sli4_hba.els_wq,
+ bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+ else
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2579 Slow-path wqe consume event carries "
+ "miss-matched qid: wcqe-qid=x%x, sp-qid=x%x\n",
+ bf_get(lpfc_wcqe_r_wqe_index, wcqe),
+ phba->sli4_hba.els_wq->queue_id);
+}
+
+/**
+ * lpfc_sli4_sp_handle_abort_xri_wcqe - Handle a xri abort event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to a WQ completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an XRI abort event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_abort_xri_wcqe(struct lpfc_hba *phba,
+ struct lpfc_queue *cq,
+ struct sli4_wcqe_xri_aborted *wcqe)
+{
+ bool workposted = false;
+ struct lpfc_cq_event *cq_event;
+ unsigned long iflags;
+
+ /* Allocate a new internal CQ_EVENT entry */
+ cq_event = lpfc_sli4_cq_event_alloc(phba);
+ if (!cq_event) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0602 Failed to allocate CQ_EVENT entry\n");
+ return false;
+ }
+
+ /* Move the CQE into the proper xri abort event list */
+ memcpy(&cq_event->cqe, wcqe, sizeof(struct sli4_wcqe_xri_aborted));
+ switch (cq->subtype) {
+ case LPFC_FCP:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&cq_event->list,
+ &phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+ /* Set the fcp xri abort event flag */
+ phba->hba_flag |= FCP_XRI_ABORT_EVENT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ case LPFC_ELS:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&cq_event->list,
+ &phba->sli4_hba.sp_els_xri_aborted_work_queue);
+ /* Set the els xri abort event flag */
+ phba->hba_flag |= ELS_XRI_ABORT_EVENT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0603 Invalid work queue CQE subtype (x%x)\n",
+ cq->subtype);
+ workposted = false;
+ break;
+ }
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_wcqe - Process a work-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to the completion queue.
+ * @wcqe: Pointer to a completion queue entry.
+ *
+ * This routine process a slow-path work-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_cqe *cqe)
+{
+ struct lpfc_wcqe_complete wcqe;
+ bool workposted = false;
+
+ /* Copy the work queue CQE and convert endian order if needed */
+ lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+ /* Check and process for different type of WCQE and dispatch */
+ switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+ case CQE_CODE_COMPL_WQE:
+ /* Process the WQ complete event */
+ workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
+ (struct lpfc_wcqe_complete *)&wcqe);
+ break;
+ case CQE_CODE_RELEASE_WQE:
+ /* Process the WQ release event */
+ lpfc_sli4_sp_handle_rel_wcqe(phba,
+ (struct lpfc_wcqe_release *)&wcqe);
+ break;
+ case CQE_CODE_XRI_ABORTED:
+ /* Process the WQ XRI abort event */
+ workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+ (struct sli4_wcqe_xri_aborted *)&wcqe);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0388 Not a valid WCQE code: x%x\n",
+ bf_get(lpfc_wcqe_c_code, &wcqe));
+ break;
+ }
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rcqe - Process a receive-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @rcqe: Pointer to receive-queue completion queue entry.
+ *
+ * This routine process a receive-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_rcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+ struct lpfc_rcqe rcqe;
+ bool workposted = false;
+ struct lpfc_queue *hrq = phba->sli4_hba.hdr_rq;
+ struct lpfc_queue *drq = phba->sli4_hba.dat_rq;
+ struct hbq_dmabuf *dma_buf;
+ uint32_t status;
+ unsigned long iflags;
+
+ /* Copy the receive queue CQE and convert endian order if needed */
+ lpfc_sli_pcimem_bcopy(cqe, &rcqe, sizeof(struct lpfc_rcqe));
+ lpfc_sli4_rq_release(hrq, drq);
+ if (bf_get(lpfc_rcqe_code, &rcqe) != CQE_CODE_RECEIVE)
+ goto out;
+ if (bf_get(lpfc_rcqe_rq_id, &rcqe) != hrq->queue_id)
+ goto out;
+
+ status = bf_get(lpfc_rcqe_status, &rcqe);
+ switch (status) {
+ case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2537 Receive Frame Truncated!!\n");
+ case FC_STATUS_RQ_SUCCESS:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ dma_buf = lpfc_sli_hbqbuf_get(&phba->hbqs[0].hbq_buffer_list);
+ if (!dma_buf) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ goto out;
+ }
+ memcpy(&dma_buf->rcqe, &rcqe, sizeof(rcqe));
+ /* save off the frame for the word thread to process */
+ list_add_tail(&dma_buf->dbuf.list, &phba->rb_pend_list);
+ /* Frame received */
+ phba->hba_flag |= HBA_RECEIVE_BUFFER;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ case FC_STATUS_INSUFF_BUF_NEED_BUF:
+ case FC_STATUS_INSUFF_BUF_FRM_DISC:
+ /* Post more buffers if possible */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ phba->hba_flag |= HBA_POST_RECEIVE_BUFFER;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ }
+out:
+ return workposted;
+
+}
+
+/**
+ * lpfc_sli4_sp_handle_eqe - Process a slow-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the slow-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on that completion queue, rearm the
+ * completion queue, and then return.
+ *
+ **/
+static void
+lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe)
+{
+ struct lpfc_queue *cq = NULL, *childq, *speq;
+ struct lpfc_cqe *cqe;
+ bool workposted = false;
+ int ecount = 0;
+ uint16_t cqid;
+
+ if (bf_get(lpfc_eqe_major_code, eqe) != 0 ||
+ bf_get(lpfc_eqe_minor_code, eqe) != 0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0359 Not a valid slow-path completion "
+ "event: majorcode=x%x, minorcode=x%x\n",
+ bf_get(lpfc_eqe_major_code, eqe),
+ bf_get(lpfc_eqe_minor_code, eqe));
+ return;
+ }
+
+ /* Get the reference to the corresponding CQ */
+ cqid = bf_get(lpfc_eqe_resource_id, eqe);
+
+ /* Search for completion queue pointer matching this cqid */
+ speq = phba->sli4_hba.sp_eq;
+ list_for_each_entry(childq, &speq->child_list, list) {
+ if (childq->queue_id == cqid) {
+ cq = childq;
+ break;
+ }
+ }
+ if (unlikely(!cq)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0365 Slow-path CQ identifier (%d) does "
+ "not exist\n", cqid);
+ return;
+ }
+
+ /* Process all the entries to the CQ */
+ switch (cq->type) {
+ case LPFC_MCQ:
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_sp_handle_mcqe(phba, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+ break;
+ case LPFC_WCQ:
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_sp_handle_wcqe(phba, cq, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+ break;
+ case LPFC_RCQ:
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_sp_handle_rcqe(phba, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0370 Invalid completion queue type (%d)\n",
+ cq->type);
+ return;
+ }
+
+ /* Catch the no cq entry condition, log an error */
+ if (unlikely(ecount == 0))
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0371 No entry from the CQ: identifier "
+ "(x%x), type (%d)\n", cq->queue_id, cq->type);
+
+ /* In any case, flash and re-arm the RCQ */
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+ /* wake up worker thread if there are works to be done */
+ if (workposted)
+ lpfc_worker_wake_up(phba);
+}
+
+/**
+ * lpfc_sli4_fp_handle_fcp_wcqe - Process fast-path work queue completion entry
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static void
+lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_FCP_RING];
+ struct lpfc_iocbq *cmdiocbq;
+ struct lpfc_iocbq irspiocbq;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pring->stats.iocb_event++;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ /* Check for response status */
+ if (unlikely(bf_get(lpfc_wcqe_c_status, wcqe))) {
+ /* If resource errors reported from HBA, reduce queue
+ * depth of the SCSI device.
+ */
+ if ((bf_get(lpfc_wcqe_c_status, wcqe) ==
+ IOSTAT_LOCAL_REJECT) &&
+ (wcqe->parameter == IOERR_NO_RESOURCES)) {
+ phba->lpfc_rampdown_queue_depth(phba);
+ }
+ /* Log the error status */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0373 FCP complete error: status=x%x, "
+ "hw_status=x%x, total_data_specified=%d, "
+ "parameter=x%x, word3=x%x\n",
+ bf_get(lpfc_wcqe_c_status, wcqe),
+ bf_get(lpfc_wcqe_c_hw_status, wcqe),
+ wcqe->total_data_placed, wcqe->parameter,
+ wcqe->word3);
+ }
+
+ /* Look up the FCP command IOCB and create pseudo response IOCB */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ if (unlikely(!cmdiocbq)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0374 FCP complete with no corresponding "
+ "cmdiocb: iotag (%d)\n",
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ return;
+ }
+ if (unlikely(!cmdiocbq->iocb_cmpl)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0375 FCP cmdiocb not callback function "
+ "iotag: (%d)\n",
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ return;
+ }
+
+ /* Fake the irspiocb and copy necessary response information */
+ lpfc_sli4_iocb_param_transfer(&irspiocbq, cmdiocbq, wcqe);
+
+ /* Pass the cmd_iocb and the rsp state to the upper layer */
+ (cmdiocbq->iocb_cmpl)(phba, cmdiocbq, &irspiocbq);
+}
+
+/**
+ * lpfc_sli4_fp_handle_rel_wcqe - Handle fast-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an fast-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_fp_handle_rel_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_wcqe_release *wcqe)
+{
+ struct lpfc_queue *childwq;
+ bool wqid_matched = false;
+ uint16_t fcp_wqid;
+
+ /* Check for fast-path FCP work queue release */
+ fcp_wqid = bf_get(lpfc_wcqe_r_wq_id, wcqe);
+ list_for_each_entry(childwq, &cq->child_list, list) {
+ if (childwq->queue_id == fcp_wqid) {
+ lpfc_sli4_wq_release(childwq,
+ bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+ wqid_matched = true;
+ break;
+ }
+ }
+ /* Report warning log message if no match found */
+ if (wqid_matched != true)
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2580 Fast-path wqe consume event carries "
+ "miss-matched qid: wcqe-qid=x%x\n", fcp_wqid);
+}
+
+/**
+ * lpfc_sli4_fp_handle_wcqe - Process fast-path work queue completion entry
+ * @cq: Pointer to the completion queue.
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static int
+lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_cqe *cqe)
+{
+ struct lpfc_wcqe_release wcqe;
+ bool workposted = false;
+
+ /* Copy the work queue CQE and convert endian order if needed */
+ lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+ /* Check and process for different type of WCQE and dispatch */
+ switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+ case CQE_CODE_COMPL_WQE:
+ /* Process the WQ complete event */
+ lpfc_sli4_fp_handle_fcp_wcqe(phba,
+ (struct lpfc_wcqe_complete *)&wcqe);
+ break;
+ case CQE_CODE_RELEASE_WQE:
+ /* Process the WQ release event */
+ lpfc_sli4_fp_handle_rel_wcqe(phba, cq,
+ (struct lpfc_wcqe_release *)&wcqe);
+ break;
+ case CQE_CODE_XRI_ABORTED:
+ /* Process the WQ XRI abort event */
+ workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+ (struct sli4_wcqe_xri_aborted *)&wcqe);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0144 Not a valid WCQE code: x%x\n",
+ bf_get(lpfc_wcqe_c_code, &wcqe));
+ break;
+ }
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_fp_handle_eqe - Process a fast-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the fast-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on the completion queue, rearm the
+ * completion queue, and then return.
+ **/
+static void
+lpfc_sli4_fp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
+ uint32_t fcp_cqidx)
+{
+ struct lpfc_queue *cq;
+ struct lpfc_cqe *cqe;
+ bool workposted = false;
+ uint16_t cqid;
+ int ecount = 0;
+
+ if (unlikely(bf_get(lpfc_eqe_major_code, eqe) != 0) ||
+ unlikely(bf_get(lpfc_eqe_minor_code, eqe) != 0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0366 Not a valid fast-path completion "
+ "event: majorcode=x%x, minorcode=x%x\n",
+ bf_get(lpfc_eqe_major_code, eqe),
+ bf_get(lpfc_eqe_minor_code, eqe));
+ return;
+ }
+
+ cq = phba->sli4_hba.fcp_cq[fcp_cqidx];
+ if (unlikely(!cq)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0367 Fast-path completion queue does not "
+ "exist\n");
+ return;
+ }
+
+ /* Get the reference to the corresponding CQ */
+ cqid = bf_get(lpfc_eqe_resource_id, eqe);
+ if (unlikely(cqid != cq->queue_id)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0368 Miss-matched fast-path completion "
+ "queue identifier: eqcqid=%d, fcpcqid=%d\n",
+ cqid, cq->queue_id);
+ return;
+ }
+
+ /* Process all the entries to the CQ */
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_fp_handle_wcqe(phba, cq, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+
+ /* Catch the no cq entry condition */
+ if (unlikely(ecount == 0))
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0369 No entry from fast-path completion "
+ "queue fcpcqid=%d\n", cq->queue_id);
+
+ /* In any case, flash and re-arm the CQ */
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+ /* wake up worker thread if there are works to be done */
+ if (workposted)
+ lpfc_worker_wake_up(phba);
+}
+
+static void
+lpfc_sli4_eq_flush(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+ struct lpfc_eqe *eqe;
+
+ /* walk all the EQ entries and drop on the floor */
+ while ((eqe = lpfc_sli4_eq_get(eq)))
+ ;
+
+ /* Clear and re-arm the EQ */
+ lpfc_sli4_eq_release(eq, LPFC_QUEUE_REARM);
+}
+
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
