Re: Adaptec driver crashes (1/3 and 2/3)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2009-05-06 at 16:13 +0900, Norman Diamond wrote:
> The easiest 100% reproducible way to crash a Linux system is as follows.
> 
> Insert either an Adaptec 1460 PCMCIA card or Adaptec 1480 CardBus card. 
> Remove the card.  Insert the card again.  Even if you knew to set the 
> console to a text mode terminal first (since Linux doesn't give Blue Screens 
> of Death otherwise), you still won't get a dump.  Not much to go on without 
> a dump, but at least it's 100% repro.

Sounds like something's still pinned.  When you remove it the first
time, can you remove the module? (that's aha152x_cs right?).

James


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux