From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Use init device discovery infrastructure to provide notification of availability of USB devices. History v2 Change names from bootdev_* to initdev_*. v1.1 Changed check for blockdevice in #if to use || instead of | v1 Initial versions Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Signed-off-by: David VomLehn <dvomlehn@xxxxxxxxx> --- drivers/usb/core/hub.c | 26 ++++++++++++++++++++++++++ 1 files changed, 26 insertions(+), 0 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index be86ae3..2074ab9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -37,6 +37,20 @@ #endif #endif +/* The mask of possible USB boot devices depends on what drivers and + * options have been configured into the kernel. There are too many + * USB network config options to list here, so just assume it is always + * possible to have a USB network device. + */ +static int usb_initdev_mask = 0 +#ifdef CONFIG_USB_SERIAL_CONSOLE + | BOOTDEV_CONSOLE_MASK +#endif +#if defined(CONFIG_USB_STORAGE) || defined(CONFIG_BLK_DEV_UB) + | BOOTDEV_BLOCK_MASK +#endif + | BOOTDEV_NETDEV_MASK; + struct usb_hub { struct device *intfdev; /* the "interface" device */ struct usb_device *hdev; @@ -73,6 +87,7 @@ struct usb_hub { unsigned limited_power:1; unsigned quiescing:1; unsigned disconnected:1; + unsigned probing:1; unsigned has_indicators:1; u8 indicator[USB_MAXCHILDREN]; @@ -1079,6 +1094,9 @@ static int hub_configure(struct usb_hub *hub, if (hub->has_indicators && blinkenlights) hub->indicator [0] = INDICATOR_CYCLE; + hub->probing = 1; + initdev_found(usb_initdev_mask); + hub_activate(hub, HUB_INIT); return 0; @@ -1124,6 +1142,9 @@ static void hub_disconnect(struct usb_interface *intf) usb_buffer_free(hub->hdev, sizeof(*hub->buffer), hub->buffer, hub->buffer_dma); + if (hub->probing) + initdev_probe_done(usb_initdev_mask); + kref_put(&hub->kref, hub_release); } @@ -3135,6 +3156,11 @@ static void hub_events(void) portstatus, portchange); } /* end for i */ + if (hub->probing) { + hub->probing = 0; + initdev_probe_done(usb_initdev_mask); + } + /* deal with hub status changes */ if (test_and_clear_bit(0, hub->event_bits) == 0) ; /* do nothing */ -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html