Hello All, Currently, device handlers process path activation in series. This leads to a lot of time delay when more than 100 luns are involved. For example, with lsi rdac 100+ luns take about 12-15 minutes. This was found by Moger Babu of LSI. This time delay can be avoided if we can do the activations asynchronously. By making scsi_dh_activate() async, we can give the device handlers an oppurtunity to decide on how to send the device activation down the wire to make the turn around time faster. They can send the commands asynchronously or send them in batches. I brought up this issue on th emailing list few days back (http://marc.info/?l=linux-scsi&m=123888063818755&w=2). This set of patches applies cleanly on 2.6.30-rc3 and is tested on the same. Please review and provide comments. This set of patched adds asynchronous support only to rdac handler. WIll be sending patches to support other handlers too. Thanks & Regards, chandra -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html