Bug fix in the broadcast primative async event code where the driver would
stop sending tm queries after the first queury was completed. This was due
driver not reseting the tm_cmds.status field back to MPT2_CMD_NOT_USED after
completing a task management request.
An addtional fix adding sanity check to insure sas_device->starget set to NULL.
During multipath testing fail over/fail back, the mid layer was holding onto
sdev longer than the fail back period, thus starget was getting set to NULL
for device being added.
Signed-off-by: Eric Moore <eric.moore@xxxxxxx>
diff -uarpN a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c 2009-04-09 16:43:07.000000000 -0600
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c 2009-04-13 15:58:57.000000000 -0600
@@ -516,12 +516,8 @@ _scsih_sas_device_add(struct MPT2SAS_ADA
handle = sas_device->handle;
parent_handle = sas_device->parent_handle;
sas_address = sas_device->sas_address;
- if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) {
+ if (!mpt2sas_transport_port_add(ioc, handle, parent_handle))
_scsih_sas_device_remove(ioc, sas_device);
- } else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc, sas_address, parent_handle);
- _scsih_sas_device_remove(ioc, sas_device);
- }
}
/**
@@ -1203,7 +1199,9 @@ scsih_target_destroy(struct scsi_target
rphy = dev_to_rphy(starget->dev.parent);
sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
rphy->identify.sas_address);
- if (sas_device)
+ if (sas_device && (sas_device->starget == starget) &&
+ (sas_device->id == starget->id) &&
+ (sas_device->channel == starget->channel))
sas_device->starget = NULL;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
@@ -3924,7 +3922,7 @@ _scsih_sas_broadcast_primative_event(str
mpt2sas_scsih_issue_tm(ioc, handle, lun,
MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
- termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) &&
(mpi_reply->ResponseCode ==
@@ -3934,10 +3932,10 @@ _scsih_sas_broadcast_primative_event(str
continue;
mpt2sas_scsih_issue_tm(ioc, handle, lun,
- MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30);
+ MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
termination_count += le32_to_cpu(mpi_reply->TerminationCount);
}
- ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
ioc->broadcast_aen_busy = 0;
mutex_unlock(&ioc->tm_cmds.mutex);
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
