Hi, again. Sorry, I forgot to write next additional info in the previous mail. ~$ cat /proc/mpt/summary ioc0: LSISAS1064E B1, FwRev=01100000h, Ports=1, MaxQ=511, IRQ=277 ~$ cat /proc/mpt/version mptlinux-3.04.07 Fusion MPT base driver Fusion MPT SAS host driver ~$ cat /sys/class/scsi_host/host8/version_fw 01.16.00.00 ~$ cat /sys/class/scsi_host/host8/version_bios 06.10.00.00 I have Debian 4.0r4a installation on a server with SAS1064E built-in controller: ~$ lspci | grep LSI 04:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS (rev 02) Vanilla kernel with aufs2-base5 patch: ~$ uname -a Linux ftp 2.6.28.7-aufs #10 Fri Mar 6 19:34:56 UTC 2009 i686 GNU/Linux There are six sata hard disks connected through SAS HDD Hub box to the controller on the motherboard by two sata cables. Everything work all right, but dmesg shows many annoying lines like this: [ 1876.212880] mptscsih: ioc0: attempting task abort! (sc=f6ff1c80) [ 1876.212953] sd 8:0:5:0: [sdh] CDB: Write(10): 2a 00 17 42 ee 0f 00 04 00 00 [ 1876.213635] mptscsih: ioc0: task abort: SUCCESS (sc=f6ff1c80) [ 1876.213973] mptscsih: ioc0: attempting task abort! (sc=d1fc18c0) [ 1876.214046] sd 8:0:5:0: [sdh] CDB: Read(10): 28 00 17 10 c0 3f 00 00 08 00 [ 1876.214727] mptscsih: ioc0: task abort: SUCCESS (sc=d1fc18c0) [ 1876.215081] mptscsih: ioc0: attempting target reset! (sc=d1fc1ec0) [ 1876.215154] sd 8:0:5:0: [sdh] CDB: Write(10): 2a 00 17 42 b1 ff 00 04 00 00 [ 1877.735588] mptscsih: ioc0: target reset: SUCCESS (sc=d1fc1ec0) sdh is a sata Western Digital disk, model WD10EADS. Is this a firmware problem? In the mailing list archive I saw similar problem, but I don't sure. Thanks. ----- End forwarded message ----- -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
