From: Aaro Koskinen <Aaro.Koskinen@xxxxxxxxx>
(Resent with proper formatting)
Fix for the sym53c8xx_2 driver to initialize lun's to_clear flag after
a bus reset (a failed clear can trigger a bus reset and it should not
be attemped again after that).
Signed-off-by: Aaro Koskinen <Aaro.Koskinen@xxxxxxxxx>
Tested-by: Tony Battersby <tonyb@xxxxxxxxxxxxxxx>
Signed-off-by: Mike Christie <michaelc@xxxxxxxxxxx>
---
drivers/scsi/sym53c8xx_2/sym_hipd.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index ffa70d1..60d6a6d 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -1896,6 +1896,15 @@ void sym_start_up(struct Scsi_Host *shost, int reason)
tp->head.sval = 0;
tp->head.wval = np->rv_scntl3;
tp->head.uval = 0;
+ if (tp->lun0p)
+ tp->lun0p->to_clear = 0;
+ if (tp->lunmp) {
+ int ln;
+
+ for (ln = 1; ln < SYM_CONF_MAX_LUN; ln++)
+ if (tp->lunmp[ln])
+ tp->lunmp[ln]->to_clear = 0;
+ }
}
/*
--
1.6.0.6
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
