mpt2sas_base Common API layer interface to MPT (Message Passing Technology) firmware. Signed-off-by: Eric Moore <eric.moore@xxxxxxx> --- --- a/drivers/scsi/mpt2sas/mpt2sas_base.c 1969-12-31 17:00:00.000000000 -0700 +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c 2009-02-24 14:27:01.000000000 -0700 @@ -0,0 +1,3403 @@ +/* + * This is the Fusion MPT base driver providing common API layer interface + * for access to MPT (Message Passing Technology) firmware. + * + * This code is based on drivers/scsi/mpt2sas/mpt2_base.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@xxxxxxx) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/sort.h> +#include <linux/io.h> + +#include "mpt2sas_base.h" + +static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS]; + +#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */ +#define MPT2SAS_MAX_REQUEST_QUEUE 500 /* maximum controller queue depth */ + +static int max_queue_depth = -1; +module_param(max_queue_depth, int, 0); +MODULE_PARM_DESC(max_queue_depth, " max controller queue depth "); + +static int max_sgl_entries = -1; +module_param(max_sgl_entries, int, 0); +MODULE_PARM_DESC(max_sgl_entries, " max sg entries "); + +static int msix_disable = -1; +module_param(msix_disable, int, 0); +MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); + +/** + * _base_fault_reset_work - workq handling ioc fault conditions + * @work: input argument, used to derive ioc + * Context: sleep. + * + * Return nothing. + */ +static void +_base_fault_reset_work(struct work_struct *work) +{ + struct MPT2SAS_ADAPTER *ioc = + container_of(work, struct MPT2SAS_ADAPTER, fault_reset_work.work); + unsigned long flags; + u32 doorbell; + int rc; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) + goto rearm_timer; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + doorbell = base_get_iocstate(ioc, 0); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + rc = base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); + printk(MPT2SAS_WARN_FMT "%s: hard reset: %s\n", ioc->name, + __func__, (rc == 0) ? "success" : "failed"); + doorbell = base_get_iocstate(ioc, 0); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) + base_fault_info(ioc, doorbell & + MPI2_DOORBELL_DATA_MASK); + } + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + rearm_timer: + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _base_sas_ioc_info - verbose translation of the ioc status + * @ioc: pointer to scsi command object + * @mpi_reply: reply mf payload returned from firmware + * @request_hdr: request mf + * + * Return nothing. + */ +static void +_base_sas_ioc_info(struct MPT2SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply, + MPI2RequestHeader_t *request_hdr) +{ + u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & + MPI2_IOCSTATUS_MASK; + char *desc = NULL; + u16 frame_sz; + char *func_str = NULL; + + /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */ + if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || + request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION) + return; + + switch (ioc_status) { + +/**************************************************************************** +* Common IOCStatus values for all replies +****************************************************************************/ + + case MPI2_IOCSTATUS_INVALID_FUNCTION: + desc = "invalid function"; + break; + case MPI2_IOCSTATUS_BUSY: + desc = "busy"; + break; + case MPI2_IOCSTATUS_INVALID_SGL: + desc = "invalid sgl"; + break; + case MPI2_IOCSTATUS_INTERNAL_ERROR: + desc = "internal error"; + break; + case MPI2_IOCSTATUS_INVALID_VPID: + desc = "invalid vpid"; + break; + case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: + desc = "insufficient resources"; + break; + case MPI2_IOCSTATUS_INVALID_FIELD: + desc = "invalid field"; + break; + case MPI2_IOCSTATUS_INVALID_STATE: + desc = "invalid state"; + break; + case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED: + desc = "op state not supported"; + break; + +/**************************************************************************** +* Config IOCStatus values +****************************************************************************/ + + case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION: + desc = "config invalid action"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE: + desc = "config invalid type"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE: + desc = "config invalid page"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_DATA: + desc = "config invalid data"; + break; + case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS: + desc = "config no defaults"; + break; + case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT: + desc = "config cant commit"; + break; + +/**************************************************************************** +* SCSI IO Reply +****************************************************************************/ + + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + break; + +/**************************************************************************** +* For use by SCSI Initiator and SCSI Target end-to-end data protection +****************************************************************************/ + + case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: + desc = "eedp guard error"; + break; + case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: + desc = "eedp ref tag error"; + break; + case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: + desc = "eedp app tag error"; + break; + +/**************************************************************************** +* SCSI Target values +****************************************************************************/ + + case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX: + desc = "target invalid io index"; + break; + case MPI2_IOCSTATUS_TARGET_ABORTED: + desc = "target aborted"; + break; + case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: + desc = "target no conn retryable"; + break; + case MPI2_IOCSTATUS_TARGET_NO_CONNECTION: + desc = "target no connection"; + break; + case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: + desc = "target xfer count mismatch"; + break; + case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: + desc = "target data offset error"; + break; + case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: + desc = "target too much write data"; + break; + case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT: + desc = "target iu too short"; + break; + case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: + desc = "target ack nak timeout"; + break; + case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED: + desc = "target nak received"; + break; + +/**************************************************************************** +* Serial Attached SCSI values +****************************************************************************/ + + case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED: + desc = "smp request failed"; + break; + case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN: + desc = "smp data overrun"; + break; + +/**************************************************************************** +* Diagnostic Buffer Post / Diagnostic Release values +****************************************************************************/ + + case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED: + desc = "diagnostic released"; + break; + default: + break; + } + + if (!desc) + return; + + switch (request_hdr->Function) { + case MPI2_FUNCTION_CONFIG: + frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size; + func_str = "config_page"; + break; + case MPI2_FUNCTION_SCSI_TASK_MGMT: + frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t); + func_str = "task_mgmt"; + break; + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t); + func_str = "sas_iounit_ctl"; + break; + case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: + frame_sz = sizeof(Mpi2SepRequest_t); + func_str = "enclosure"; + break; + case MPI2_FUNCTION_IOC_INIT: + frame_sz = sizeof(Mpi2IOCInitRequest_t); + func_str = "ioc_init"; + break; + case MPI2_FUNCTION_PORT_ENABLE: + frame_sz = sizeof(Mpi2PortEnableRequest_t); + func_str = "port_enable"; + break; + case MPI2_FUNCTION_SMP_PASSTHROUGH: + frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size; + func_str = "smp_passthru"; + break; + default: + frame_sz = 32; + func_str = "unknown"; + break; + } + + printk(MPT2SAS_WARN_FMT "ioc_status: %s(0x%04x), request(0x%p)," + " (%s)\n", ioc->name, desc, ioc_status, request_hdr, func_str); + + _debug_dump_mf(request_hdr, frame_sz/4); +} + +/** + * _base_display_event_data - verbose translation of firmware asyn events + * @ioc: pointer to scsi command object + * @mpi_reply: reply mf payload returned from firmware + * + * Return nothing. + */ +static void +_base_display_event_data(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply) +{ + char *desc = NULL; + u16 event; + + if (!(ioc->logging_level & MPT_DEBUG_EVENTS)) + return; + + event = le16_to_cpu(mpi_reply->Event); + + switch (event) { + case MPI2_EVENT_LOG_DATA: + desc = "Log Data"; + break; + case MPI2_EVENT_STATE_CHANGE: + desc = "Status Change"; + break; + case MPI2_EVENT_HARD_RESET_RECEIVED: + desc = "Hard Reset Received"; + break; + case MPI2_EVENT_EVENT_CHANGE: + desc = "Event Change"; + break; + case MPI2_EVENT_TASK_SET_FULL: + desc = "Task Set Full"; + break; + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + desc = "Device Status Change"; + break; + case MPI2_EVENT_IR_OPERATION_STATUS: + desc = "IR Operation Status"; + break; + case MPI2_EVENT_SAS_DISCOVERY: + desc = "Discovery"; + break; + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + desc = "SAS Broadcast Primitive"; + break; + case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: + desc = "SAS Init Device Status Change"; + break; + case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW: + desc = "SAS Init Table Overflow"; + break; + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + desc = "SAS Topology Change List"; + break; + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + desc = "SAS Enclosure Device Status Change"; + break; + case MPI2_EVENT_IR_VOLUME: + desc = "IR Volume"; + break; + case MPI2_EVENT_IR_PHYSICAL_DISK: + desc = "IR Physical Disk"; + break; + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + desc = "IR Configuration Change List"; + break; + case MPI2_EVENT_LOG_ENTRY_ADDED: + desc = "Log Entry Added"; + break; + } + + if (!desc) + return; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, desc); +} +#endif + +/** + * _base_sas_log_info - verbose translation of firmware log info + * @ioc: pointer to scsi command object + * @log_info: log info + * + * Return nothing. + */ +static void +_base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info) +{ + union loginfo_type { + u32 loginfo; + struct { + u32 subcode:16; + u32 code:8; + u32 originator:4; + u32 bus_type:4; + } dw; + }; + union loginfo_type sas_loginfo; + char *originator_str = NULL; + + sas_loginfo.loginfo = log_info; + if (sas_loginfo.dw.bus_type != 3 /*SAS*/) + return; + + /* eat the loginfos associated with task aborts */ + if (ioc->ignore_loginfos && (log_info == 30050000 || log_info == + 0x31140000 || log_info == 0x31130000)) + return; + + switch (sas_loginfo.dw.originator) { + case 0: + originator_str = "IOP"; + break; + case 1: + originator_str = "PL"; + break; + case 2: + originator_str = "IR"; + break; + } + + printk(MPT2SAS_WARN_FMT "log_info(0x%08x): originator(%s), " + "code(0x%02x), sub_code(0x%04x)\n", ioc->name, log_info, + originator_str, sas_loginfo.dw.code, + sas_loginfo.dw.subcode); +} + +/** + * base_fault_info - verbose translation of firmware FAULT code + * @ioc: pointer to scsi command object + * @fault_code: fault code + * + * Return nothing. + */ +void +base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code) +{ + printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n", + ioc->name, fault_code); +} + +/** + * _base_display_reply_info - + * @ioc: pointer to scsi command object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +static void +_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + u16 ioc_status; + + mpi_reply = base_get_reply_virt_addr(ioc, reply); + ioc_status = le16_to_cpu(mpi_reply->IOCStatus); +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if ((ioc_status & MPI2_IOCSTATUS_MASK) && + (ioc->logging_level & MPT_DEBUG_REPLY)) { + _base_sas_ioc_info(ioc , mpi_reply, + base_get_msg_frame(ioc, smid)); + } +#endif + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) + _base_sas_log_info(ioc, le32_to_cpu(mpi_reply->IOCLogInfo)); +} + +/** + * base_done - base internal command completion routine + * @ioc: pointer to scsi command object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +void +base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + mpi_reply = base_get_reply_virt_addr(ioc, reply); + if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK) + return; + + if (ioc->base_cmds.status == MPT2_CMD_NOT_USED) + return; + + ioc->base_cmds.status |= MPT2_CMD_COMPLETE; + if (mpi_reply) { + ioc->base_cmds.status |= MPT2_CMD_REPLY_VALID; + memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + } + ioc->base_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->base_cmds.done); +} + +/** + * _base_async_event - main callback handler for firmware asyn events + * @ioc: pointer to scsi command object + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +static void +_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) +{ + Mpi2EventNotificationReply_t *mpi_reply; + Mpi2EventAckRequest_t *ack_request; + u16 smid; + + mpi_reply = base_get_reply_virt_addr(ioc, reply); + if (!mpi_reply) + return; + if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION) + return; +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _base_display_event_data(ioc, mpi_reply); +#endif + if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED)) + goto out; + smid = base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + goto out; + } + + ack_request = base_get_msg_frame(ioc, smid); + memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t)); + ack_request->Function = MPI2_FUNCTION_EVENT_ACK; + ack_request->Event = mpi_reply->Event; + ack_request->EventContext = mpi_reply->EventContext; + ack_request->VF_ID = VF_ID; + base_put_smid_default(ioc, smid, VF_ID); + + out: + scsih_event_callback(ioc, VF_ID, reply); /* scsih callback handler */ + ctl_event_callback(ioc, VF_ID, reply); /* ctl callback handler */ +} + +/** + * _base_mask_interrupts - disable interrupts + * @ioc: pointer to scsi command object + * + * Disabling ResetIRQ, Reply and Doorbell Interrupts + * + * Return nothing. + */ +static void +_base_mask_interrupts(struct MPT2SAS_ADAPTER *ioc) +{ + u32 him_register; + + ioc->mask_interrupts = 1; + him_register = readl(&ioc->chip->HostInterruptMask); + him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK; + writel(him_register, &ioc->chip->HostInterruptMask); +} + +/** + * _base_unmask_interrupts - enable interrupts + * @ioc: pointer to scsi command object + * + * Enabling only Reply Interrupts + * + * Return nothing. + */ +static void +_base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc) +{ + u32 him_register; + + writel(0, &ioc->chip->HostInterruptStatus); + him_register = readl(&ioc->chip->HostInterruptMask); + him_register &= ~MPI2_HIM_RIM; + writel(him_register, &ioc->chip->HostInterruptMask); + ioc->mask_interrupts = 0; +} + +/** + * base_interrupt - MPT adapter (IOC) specific interrupt handler. + * @irq: irq number (not used) + * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure + * @r: pt_regs pointer (not used) + * + * Return IRQ_HANDLE if processed, else IRQ_NONE. + */ +static irqreturn_t +base_interrupt(int irq, void *bus_id) +{ + u32 post_index, post_index_next, completed_cmds; + u8 request_desript_type; + u16 smid; + u8 cb_idx; + u32 reply; + u8 VF_ID; + int i; + struct MPT2SAS_ADAPTER *ioc = bus_id; + + if (ioc->mask_interrupts) + return IRQ_NONE; + + post_index = ioc->reply_post_host_index; + request_desript_type = ioc->reply_post_free[post_index]. + Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) + return IRQ_NONE; + + completed_cmds = 0; + do { + if (ioc->reply_post_free[post_index].Words == + 0xFFFFFFFFFFFFFFFFULL) + goto out; + reply = 0; + cb_idx = 0xFF; + smid = le16_to_cpu(ioc->reply_post_free[post_index]. + Default.DescriptorTypeDependent1); + VF_ID = ioc->reply_post_free[post_index]. + Default.VF_ID; + if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) { + reply = le32_to_cpu(ioc->reply_post_free[post_index]. + AddressReply.ReplyFrameAddress); + } else if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER) + goto next; + else if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS) + goto next; + if (smid) + cb_idx = ioc->scsi_lookup[smid - 1].cb_idx; + if (smid && cb_idx != 0xFF) { + mpt_callbacks[cb_idx](ioc, smid, VF_ID, reply); + if (reply) + _base_display_reply_info(ioc, smid, VF_ID, + reply); + base_free_smid(ioc, smid); + } + if (!smid) + _base_async_event(ioc, VF_ID, reply); + + /* reply free queue handling */ + if (reply) { + ioc->reply_free_host_index = + (ioc->reply_free_host_index == + (ioc->reply_free_queue_depth - 1)) ? + 0 : ioc->reply_free_host_index + 1; + ioc->reply_free[ioc->reply_free_host_index] = + cpu_to_le32(reply); + writel(ioc->reply_free_host_index, + &ioc->chip->ReplyFreeHostIndex); + wmb(); + } + + next: + post_index_next = (post_index == (ioc->reply_post_queue_depth - + 1)) ? 0 : post_index + 1; + request_desript_type = + ioc->reply_post_free[post_index_next].Default.ReplyFlags + & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + completed_cmds++; + if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) + goto out; + post_index = post_index_next; + } while (1); + + out: + + if (!completed_cmds) + return IRQ_NONE; + + /* reply post descriptor handling */ + post_index_next = ioc->reply_post_host_index; + for (i = 0 ; i < completed_cmds; i++) { + post_index = post_index_next; + /* poison the reply post descriptor */ + ioc->reply_post_free[post_index_next].Words = + 0xFFFFFFFFFFFFFFFFULL; + post_index_next = (post_index == + (ioc->reply_post_queue_depth - 1)) + ? 0 : post_index + 1; + } + ioc->reply_post_host_index = post_index_next; + writel(post_index_next, &ioc->chip->ReplyPostHostIndex); + wmb(); + return IRQ_HANDLED; +} + +/** + * base_release_callback_handler - clear interupt callback handler + * @cb_idx: callback index + * + * Return nothing. + */ +void +base_release_callback_handler(u8 cb_idx) +{ + mpt_callbacks[cb_idx] = NULL; +} + +/** + * base_register_callback_handler - obtain index for the interrupt callback handler + * @cb_func: callback function + * + * Returns cb_func. + */ +u8 +base_register_callback_handler(MPT_CALLBACK cb_func) +{ + u8 cb_idx; + + for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--) + if (mpt_callbacks[cb_idx] == NULL) + break; + + mpt_callbacks[cb_idx] = cb_func; + return cb_idx; +} + +/** + * base_initialize_callback_handler - initialize the interrupt callback handler + * + * Return nothing. + */ +void +base_initialize_callback_handler(void) +{ + u8 cb_idx; + + for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++) + base_release_callback_handler(cb_idx); +} + +/** + * base_build_zero_len_sge - build zero length sg entry + * @ioc: per adapter object + * @paddr: virtual address for SGE + * + * Create a zero length scatter gather entry to insure the IOCs hardware has + * something to use if the target device goes brain dead and tries + * to send data even when none is asked for. + * + * Return nothing. + */ +void +base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr) +{ + u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST | + MPI2_SGE_FLAGS_SIMPLE_ELEMENT) << + MPI2_SGE_FLAGS_SHIFT); + ioc->base_add_sg_single(paddr, flags_length, -1); +} + +/** + * base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr. + * @paddr: virtual address for SGE + * @flags_length: SGE flags and data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr) +{ + Mpi2SGESimple32_t *sgel = paddr; + + flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING | + MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; + sgel->FlagsLength = cpu_to_le32(flags_length); + sgel->Address = cpu_to_le32(dma_addr); +} + + +/** + * base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr. + * @paddr: virtual address for SGE + * @flags_length: SGE flags and data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr) +{ + Mpi2SGESimple64_t *sgel = paddr; + + flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING | + MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; + sgel->FlagsLength = cpu_to_le32(flags_length); + sgel->Address = cpu_to_le64(dma_addr); +} + +#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10)) + +/** + * _base_config_dma_addressing - set dma addressing + * @ioc: per adapter object + * @pdev: PCI device struct + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev) +{ + struct sysinfo s; + char *desc = NULL; + + if (sizeof(dma_addr_t) > 4) { + const uint64_t required_mask = + dma_get_required_mask(&pdev->dev); + if ((required_mask > DMA_32BIT_MASK) && !pci_set_dma_mask(pdev, + DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev, + DMA_64BIT_MASK)) { + ioc->base_add_sg_single = &base_add_sg_single_64; + ioc->sge_size = sizeof(Mpi2SGESimple64_t); + desc = "64"; + goto out; + } + } + + if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK) + && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + ioc->base_add_sg_single = &base_add_sg_single_32; + ioc->sge_size = sizeof(Mpi2SGESimple32_t); + desc = "32"; + } else + return -ENODEV; + + out: + si_meminfo(&s); + printk(MPT2SAS_INFO_FMT "%s BIT PCI BUS DMA ADDRESSING SUPPORTED, " + "total mem (%ld kB)\n", ioc->name, desc, convert_to_kb(s.totalram)); + + return 0; +} + +/** + * base_save_msix_table - backup msix vector table + * @ioc: per adapter object + * + * This address an errata where diag reset clears out the table + */ +static void +base_save_msix_table(struct MPT2SAS_ADAPTER *ioc) +{ + int i; + + if (!ioc->msix_enable || ioc->msix_table_backup == NULL) + return; + + for (i = 0; i < ioc->msix_vector_count; i++) + ioc->msix_table_backup[i] = ioc->msix_table[i]; +} + +/** + * base_restore_msix_table - this restores the msix vector table + * @ioc: per adapter object + * + */ +static void +base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc) +{ + int i; + + if (!ioc->msix_enable || ioc->msix_table_backup == NULL) + return; + + for (i = 0; i < ioc->msix_vector_count; i++) + ioc->msix_table[i] = ioc->msix_table_backup[i]; +} + +/** + * base_check_enable_msix - checks MSIX capabable. + * @ioc: per adapter object + * + * Check to see if card is capable of MSIX, and set number + * of avaliable msix vectors + */ +static int +base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc) +{ + int base; + u16 message_control; + u32 msix_table_offset; + + base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); + if (!base) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not " + "supported\n", ioc->name)); + return -EINVAL; + } + + /* get msix vector count */ + pci_read_config_word(ioc->pdev, base + 2, &message_control); + ioc->msix_vector_count = (message_control & 0x3FF) + 1; + + /* get msix table */ + pci_read_config_dword(ioc->pdev, base + 4, &msix_table_offset); + msix_table_offset &= 0xFFFFFFF8; + ioc->msix_table = (u32 *)((void *)ioc->chip + msix_table_offset); + + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, " + "vector_count(%d), table_offset(0x%08x), table(%p)\n", ioc->name, + ioc->msix_vector_count, msix_table_offset, ioc->msix_table)); + return 0; +} + +/** + * base_disable_msix - disables msix + * @ioc: per adapter object + * + */ +static void +base_disable_msix(struct MPT2SAS_ADAPTER *ioc) +{ + if (ioc->msix_enable) { + pci_disable_msix(ioc->pdev); + kfree(ioc->msix_table_backup); + ioc->msix_table_backup = NULL; + ioc->msix_enable = 0; + } +} + +/** + * base_enable_msix - enables msix, failback to io_apic + * @ioc: per adapter object + * + */ +static int +base_enable_msix(struct MPT2SAS_ADAPTER *ioc) +{ + struct msix_entry *entries = NULL; + int i, r; + u8 try_msix = 0; + + if (msix_disable == -1 || msix_disable == 0) + try_msix = 1; + + if (!try_msix) + goto try_ioapic; + + if (base_check_enable_msix(ioc) != 0) + goto try_ioapic; + + entries = kcalloc(ioc->msix_vector_count, sizeof(struct msix_entry), + GFP_KERNEL); + if (!entries) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for " + "msix_entry failed !!!\n", ioc->name)); + goto try_ioapic; + } + + for (i = 0; i < ioc->msix_vector_count; i++) + entries[i].entry = i; + + ioc->msix_table_backup = kcalloc(ioc->msix_vector_count, 4, GFP_KERNEL); + if (!ioc->msix_table_backup) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for " + "msix_table_backup failed!!!\n", ioc->name)); + goto try_ioapic; + } + + r = pci_enable_msix(ioc->pdev, entries, ioc->msix_vector_count); + if (r) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "pci_enable_msix " + "failed (r=%d) !!!\n", ioc->name, r)); + goto try_ioapic; + } + + /* current HW implemention uses only one interrupt handler */ + r = request_irq(entries[0].vector, base_interrupt, IRQF_SHARED, + ioc->name, ioc); + if (r) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "unable to allocate " + "interrupt %d !!!\n", ioc->name, entries[0].vector)); + pci_disable_msix(ioc->pdev); + goto try_ioapic; + } + + ioc->pci_irq = entries[0].vector; + ioc->msix_enable = 1; + kfree(entries); + return 0; + +/* failback to io_apic interrupt routing */ + try_ioapic: + kfree(entries); + + r = request_irq(ioc->pdev->irq, base_interrupt, IRQF_SHARED, + ioc->name, ioc); + if (r) { + printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n", + ioc->name, ioc->pdev->irq); + r = -EBUSY; + goto out_fail; + } + + ioc->pci_irq = ioc->pdev->irq; + return 0; + + out_fail: + return r; +} + +/** + * base_map_resources - map in controller resources (io/irq/memap) + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +base_map_resources(struct MPT2SAS_ADAPTER *ioc) +{ + struct pci_dev *pdev = ioc->pdev; + u32 memap_sz; + u32 pio_sz; + int i, r = 0; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", + ioc->name, __func__)); + + ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); + if (pci_enable_device_mem(pdev)) { + printk(MPT2SAS_WARN_FMT "pci_enable_device_mem: " + "failed\n", ioc->name); + return -ENODEV; + } + + + if (pci_request_selected_regions(pdev, ioc->bars, + MPT2SAS_DRIVER_NAME)) { + printk(MPT2SAS_WARN_FMT "pci_request_selected_regions: " + "failed\n", ioc->name); + r = -ENODEV; + goto out_fail; + } + + pci_set_master(pdev); + + if (_base_config_dma_addressing(ioc, pdev) != 0) { + printk(MPT2SAS_WARN_FMT "no suitable DMA mask for %s\n", + ioc->name, pci_name(pdev)); + r = -ENODEV; + goto out_fail; + } + + for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO) { + if (pio_sz) + continue; + ioc->pio_chip = pci_resource_start(pdev, i); + pio_sz = pci_resource_len(pdev, i); + } else { + if (memap_sz) + continue; + ioc->chip_phys = pci_resource_start(pdev, i); + memap_sz = pci_resource_len(pdev, i); + ioc->chip = ioremap(ioc->chip_phys, memap_sz); + if (ioc->chip == NULL) { + printk(MPT2SAS_ERR_FMT "unable to map adapter " + "memory!\n", ioc->name); + r = -EINVAL; + goto out_fail; + } + } + } + + pci_set_drvdata(pdev, ioc->shost); + _base_mask_interrupts(ioc); + r = base_enable_msix(ioc); + if (r) + goto out_fail; + + printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n", + ioc->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" : + "IO-APIC enabled"), ioc->pci_irq); + printk(MPT2SAS_INFO_FMT "iomem(0x%lx), mapped(0x%p), size(%d)\n", + ioc->name, ioc->chip_phys, ioc->chip, memap_sz); + printk(MPT2SAS_INFO_FMT "ioport(0x%lx), size(%d)\n", + ioc->name, ioc->pio_chip, pio_sz); + + return 0; + + out_fail: + if (ioc->chip_phys) + iounmap(ioc->chip); + ioc->chip_phys = 0; + ioc->pci_irq = -1; + pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return r; +} + +/** + * base_get_msg_frame_dma - obtain request mf pointer phys addr + * @ioc: per adapter object + * @smid: system request message index(smid zero is invalid) + * + * Returns phys pointer to message frame. + */ +dma_addr_t +base_get_msg_frame_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->request_dma + (smid * ioc->request_sz); +} + +/** + * base_get_msg_frame - obtain request mf pointer + * @ioc: per adapter object + * @smid: system request message index(smid zero is invalid) + * + * Returns virt pointer to message frame. + */ +void * +base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->request + (smid * ioc->request_sz)); +} + +/** + * base_get_sense_buffer - obtain a sense buffer assigned to a mf request + * @ioc: per adapter object + * @smid: system request message index + * + * Returns virt pointer to sense buffer. + */ +void * +base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE)); +} + +/** + * base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request + * @ioc: per adapter object + * @smid: system request message index + * + * Returns phys pointer to sense buffer. + */ +dma_addr_t +base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->sense_dma + ((smid - 1) * SCSI_SENSE_BUFFERSIZE); +} + +/** + * base_get_reply_virt_addr - obtain reply frames virt address + * @ioc: per adapter object + * @phys_addr: lower 32 physical addr of the reply + * + * Converts 32bit lower physical addr into a virt address. + */ +void * +base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr) +{ + if (!phys_addr) + return NULL; + return ioc->reply + (phys_addr - (u32)ioc->reply_dma); +} + +/** + * base_get_smid - obtain a free smid + * @ioc: per adapter object + * @cb_idx: callback index + * + * Returns smid (zero is invalid) + */ +u16 +base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx) +{ + unsigned long flags; + struct request_tracker *request; + u16 smid; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->free_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + printk(MPT2SAS_ERR_FMT "%s: smid not available\n", + ioc->name, __func__); + return 0; + } + + request = list_entry(ioc->free_list.next, + struct request_tracker, tracker_list); + request->cb_idx = cb_idx; + smid = request->smid; + list_del(&request->tracker_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + + +/** + * base_free_smid - put smid back on free_list + * @ioc: per adapter object + * @smid: system request message index + * + * Return nothing. + */ +void +base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + ioc->scsi_lookup[smid - 1].cb_idx = 0xFF; + list_add_tail(&ioc->scsi_lookup[smid - 1].tracker_list, + &ioc->free_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + /* + * See _wait_for_commands_to_complete() call with regards to this code. + */ + if (ioc->shost_recovery && ioc->pending_io_count) { + if (ioc->pending_io_count == 1) + wake_up(&ioc->reset_wq); + ioc->pending_io_count--; + } +} + +/** + * _base_writeq - 64 bit write to MMIO + * @ioc: per adapter object + * @b: data payload + * @addr: address in MMIO space + * @writeq_lock: spin lock + * + * Glue for handling an atomic 64 bit word to MMIO. This special handling takes + * care of 32 bit environment where its not quarenteed to send the entire word + * in one transfer. + */ +#ifndef writeq +static inline void _base_writeq(__u64 b, volatile void __iomem *addr, + spinlock_t *writeq_lock) +{ + unsigned long flags; + __u64 data_out = cpu_to_le64(b); + + spin_lock_irqsave(writeq_lock, flags); + writel((u32)(data_out), addr); + writel((u32)(data_out >> 32), (addr + 4)); + spin_unlock_irqrestore(writeq_lock, flags); +} +#else +static inline void _base_writeq(__u64 b, volatile void __iomem *addr, + spinlock_t *writeq_lock) +{ + writeq(cpu_to_le64(b), addr); +} +#endif + +/** + * base_put_smid_scsi_io - send SCSI_IO request to firmware + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * @handle: device handle + * + * Return nothing. + */ +void +base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id, + u16 handle) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + + descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; + descriptor.SCSIIO.VF_ID = vf_id; + descriptor.SCSIIO.SMID = cpu_to_le16(smid); + descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); + descriptor.SCSIIO.LMID = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + + +/** + * base_put_smid_hi_priority - send Task Managment request to firmware + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * + * Return nothing. + */ +void +base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.HighPriority.RequestFlags = + MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; + descriptor.HighPriority.VF_ID = vf_id; + descriptor.HighPriority.SMID = cpu_to_le16(smid); + descriptor.HighPriority.LMID = 0; + descriptor.HighPriority.Reserved1 = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * base_put_smid_default - Default, primarily used for config pages + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * + * Return nothing. + */ +void +base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; + descriptor.Default.VF_ID = vf_id; + descriptor.Default.SMID = cpu_to_le16(smid); + descriptor.Default.LMID = 0; + descriptor.Default.DescriptorTypeDependent = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * base_put_smid_target_assist - send Target Assist/Status to firmware + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * @io_index: value used to track the IO + * + * Return nothing. + */ +void +base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id, + u16 io_index) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.SCSITarget.RequestFlags = + MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET; + descriptor.SCSITarget.VF_ID = vf_id; + descriptor.SCSITarget.SMID = cpu_to_le16(smid); + descriptor.SCSITarget.LMID = 0; + descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index); + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * _base_display_ioc_capabilities - Disply IOC's capabilities. + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) +{ + int i = 0; + char desc[16]; + u8 revision; + u32 iounit_pg1_flags; + + pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); + strncpy(desc, ioc->manu_pg0.ChipName, 16); + printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), " + "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n", + ioc->name, desc, + (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, + (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, + (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, + ioc->facts.FWVersion.Word & 0x000000FF, + revision, + (ioc->bios_pg3.BiosVersion & 0xFF000000) >> 24, + (ioc->bios_pg3.BiosVersion & 0x00FF0000) >> 16, + (ioc->bios_pg3.BiosVersion & 0x0000FF00) >> 8, + ioc->bios_pg3.BiosVersion & 0x000000FF); + + printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name); + + if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) { + printk("Initiator"); + i++; + } + + if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) { + printk("%sTarget", i ? "," : ""); + i++; + } + + i = 0; + printk("), "); + printk("Capabilities=("); + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { + printk("Raid"); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { + printk("%sTLR", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) { + printk("%sMulticast", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) { + printk("%sBIDI Target", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) { + printk("%sEEDP", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) { + printk("%sSnapshot Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) { + printk("%sDiag Trace Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) { + printk("%sTask Set Full", i ? "," : ""); + i++; + } + + iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); + if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) { + printk("%sNCQ", i ? "," : ""); + i++; + } + + printk(")\n"); +} + +/** + * _base_static_config_pages - static start of day config pages + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_static_config_pages(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2ConfigReply_t mpi_reply; + u32 iounit_pg1_flags; + + config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); + config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); + config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); + config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); + config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); + config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + _base_display_ioc_capabilities(ioc); + + /* + * Enable task_set_full handling in iounit_pg1 when the + * facts capabilities indicate that its supported. + */ + iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); + if ((ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING)) + iounit_pg1_flags &= + ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; + else + iounit_pg1_flags |= + MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; + ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); + config_set_iounit_pg1(ioc, &mpi_reply, ioc->iounit_pg1); +} + +/** + * _base_release_memory_pools - release memory + * @ioc: per adapter object + * + * Free memory allocated from _base_allocate_memory_pools. + * + * Return nothing. + */ +static void +_base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc) +{ + dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->request) { + pci_free_consistent(ioc->pdev, ioc->request_dma_sz, + ioc->request, ioc->request_dma); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "request_pool(0x%p)" + ": free\n", ioc->name, ioc->request)); + ioc->request = NULL; + } + + if (ioc->sense) { + pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma); + if (ioc->sense_dma_pool) + pci_pool_destroy(ioc->sense_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_pool(0x%p)" + ": free\n", ioc->name, ioc->sense)); + ioc->sense = NULL; + } + + if (ioc->reply) { + pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma); + if (ioc->reply_dma_pool) + pci_pool_destroy(ioc->reply_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_pool(0x%p)" + ": free\n", ioc->name, ioc->reply)); + ioc->reply = NULL; + } + + if (ioc->reply_free) { + pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free, + ioc->reply_free_dma); + if (ioc->reply_free_dma_pool) + pci_pool_destroy(ioc->reply_free_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_pool" + "(0x%p): free\n", ioc->name, ioc->reply_free)); + ioc->reply_free = NULL; + } + + if (ioc->reply_post_free) { + pci_pool_free(ioc->reply_post_free_dma_pool, + ioc->reply_post_free, ioc->reply_post_free_dma); + if (ioc->reply_post_free_dma_pool) + pci_pool_destroy(ioc->reply_post_free_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT + "reply_post_free_pool(0x%p): free\n", ioc->name, + ioc->reply_post_free)); + ioc->reply_post_free = NULL; + } + + if (ioc->config_page) { + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT + "config_page(0x%p): free\n", ioc->name, + ioc->config_page)); + pci_free_consistent(ioc->pdev, ioc->config_page_sz, + ioc->config_page, ioc->config_page_dma); + } + + kfree(ioc->scsi_lookup); +} + + +/** + * _base_allocate_memory_pools - allocate start of day memory pools + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 success, anything else error + */ +static int +_base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2IOCFactsReply_t *facts; + u32 queue_size, queue_diff; + u16 max_sge_elements; + u16 num_of_reply_frames; + u16 chains_needed_per_io; + u32 sz, total_sz; + u16 i; + u32 retry_sz; + u16 max_request_credit; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + retry_sz = 0; + facts = &ioc->facts; + + /* command line tunables for max sgl entries */ + if (max_sgl_entries != -1) { + ioc->shost->sg_tablesize = (max_sgl_entries < + MPT2SAS_SG_DEPTH) ? max_sgl_entries : + MPT2SAS_SG_DEPTH; + } else { + ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH; + } + + /* command line tunables for max controller queue depth */ + if (max_queue_depth != -1) { + max_request_credit = (max_queue_depth < facts->RequestCredit) + ? max_queue_depth : facts->RequestCredit; + } else { + max_request_credit = (facts->RequestCredit > + MPT2SAS_MAX_REQUEST_QUEUE) ? MPT2SAS_MAX_REQUEST_QUEUE : + facts->RequestCredit; + } + ioc->request_depth = max_request_credit; + + /* request frame size */ + ioc->request_sz = facts->IOCRequestFrameSize * 4; + + /* reply frame size */ + ioc->reply_sz = facts->ReplyFrameSize * 4; + + retry_allocation: + total_sz = 0; + /* calculate number of sg elements left over in the 1st frame */ + max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) - + sizeof(Mpi2SGEIOUnion_t)) + ioc->sge_size); + ioc->max_sges_in_main_message = max_sge_elements/ioc->sge_size; + + /* now do the same for a chain buffer */ + max_sge_elements = ioc->request_sz - ioc->sge_size; + ioc->max_sges_in_chain_message = max_sge_elements/ioc->sge_size; + + ioc->chain_offset_value_for_main_message = + ((sizeof(Mpi2SCSIIORequest_t) - sizeof(Mpi2SGEIOUnion_t)) + + (ioc->max_sges_in_chain_message * ioc->sge_size)) / 4; + + /* + * MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE + */ + chains_needed_per_io = ((ioc->shost->sg_tablesize - + ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message) + + 1; + if (chains_needed_per_io > facts->MaxChainDepth) { + chains_needed_per_io = facts->MaxChainDepth; + ioc->shost->sg_tablesize = min_t(u16, + ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message + * chains_needed_per_io), ioc->shost->sg_tablesize); + } + ioc->chains_needed_per_io = chains_needed_per_io; + + /* reply free queue sizing - taking into account for events */ + num_of_reply_frames = ioc->request_depth + 32; + + /* number of replies frames can't be a multiple of 16 */ + /* decrease number of reply frames by 1 */ + if (!(num_of_reply_frames % 16)) + num_of_reply_frames--; + + /* calculate number of reply free queue entries + * (must be multiple of 16) + */ + + /* (we know reply_free_queue_depth is not a multiple of 16) */ + queue_size = num_of_reply_frames; + queue_size += 16 - (queue_size % 16); + ioc->reply_free_queue_depth = queue_size; + + /* reply descriptor post queue sizing */ + /* this size should be the number of request frames + number of reply + * frames + */ + + queue_size = ioc->request_depth + num_of_reply_frames + 1; + /* round up to 16 byte boundary */ + if (queue_size % 16) + queue_size += 16 - (queue_size % 16); + + /* check against IOC maximum reply post queue depth */ + if (queue_size > facts->MaxReplyDescriptorPostQueueDepth) { + queue_diff = queue_size - + facts->MaxReplyDescriptorPostQueueDepth; + + /* round queue_diff up to multiple of 16 */ + if (queue_diff % 16) + queue_diff += 16 - (queue_diff % 16); + + /* adjust request_depth, reply_free_queue_depth, + * and queue_size + */ + ioc->request_depth -= queue_diff; + ioc->reply_free_queue_depth -= queue_diff; + queue_size -= queue_diff; + } + ioc->reply_post_queue_depth = queue_size; + + /* max scsi host queue depth */ + ioc->shost->can_queue = ioc->request_depth - INTERNAL_CMDS_COUNT; + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host queue: depth" + "(%d)\n", ioc->name, ioc->shost->can_queue)); + + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: " + "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), " + "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message, + ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize, + ioc->chains_needed_per_io)); + + /* contiguous pool for request and chains, 16 byte align, one extra " + * "frame for smid=0 + */ + ioc->chain_depth = ioc->chains_needed_per_io * ioc->request_depth; + sz = ((ioc->request_depth + 1 + ioc->chain_depth) * ioc->request_sz); + + ioc->request_dma_sz = sz; + ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma); + if (!ioc->request) { + printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent " + "failed: req_depth(%d), chains_per_io(%d), frame_sz(%d), " + "total(%d kB)\n", ioc->name, ioc->request_depth, + ioc->chains_needed_per_io, ioc->request_sz, sz/1024); + if (ioc->request_depth < MPT2SAS_SAS_QUEUE_DEPTH) + goto out; + retry_sz += 64; + ioc->request_depth = max_request_credit - retry_sz; + goto retry_allocation; + } + + if (retry_sz) + printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent " + "succeed: req_depth(%d), chains_per_io(%d), frame_sz(%d), " + "total(%d kb)\n", ioc->name, ioc->request_depth, + ioc->chains_needed_per_io, ioc->request_sz, sz/1024); + + ioc->chain = ioc->request + ((ioc->request_depth + 1) * + ioc->request_sz); + ioc->chain_dma = ioc->request_dma + ((ioc->request_depth + 1) * + ioc->request_sz); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): " + "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, + ioc->request, ioc->request_depth, ioc->request_sz, + ((ioc->request_depth + 1) * ioc->request_sz)/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool(0x%p): depth" + "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->chain, + ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth * + ioc->request_sz))/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool: dma(0x%llx)\n", + ioc->name, (unsigned long long) ioc->request_dma)); + total_sz += sz; + + ioc->scsi_lookup = kcalloc(ioc->request_depth, + sizeof(struct request_tracker), GFP_KERNEL); + if (!ioc->scsi_lookup) { + printk(MPT2SAS_ERR_FMT "scsi_lookup: kcalloc failed\n", + ioc->name); + goto out; + } + + /* initialize some bits */ + for (i = 0; i < ioc->request_depth; i++) + ioc->scsi_lookup[i].smid = i + 1; + + /* sense buffers, 4 byte align */ + sz = ioc->request_depth * SCSI_SENSE_BUFFERSIZE; + ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4, + 0); + if (!ioc->sense_dma_pool) { + printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL, + &ioc->sense_dma); + if (!ioc->sense) { + printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT + "sense pool(0x%p): depth(%d), element_size(%d), pool_size" + "(%d kB)\n", ioc->name, ioc->sense, ioc->request_depth, + SCSI_SENSE_BUFFERSIZE, sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->sense_dma)); + total_sz += sz; + + /* reply pool, 4 byte align */ + sz = ioc->reply_free_queue_depth * ioc->reply_sz; + ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4, + 0); + if (!ioc->reply_dma_pool) { + printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL, + &ioc->reply_dma); + if (!ioc->reply) { + printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply pool(0x%p): depth" + "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->reply, + ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->reply_dma)); + total_sz += sz; + + /* reply free queue, 16 byte align */ + sz = ioc->reply_free_queue_depth * 4; + ioc->reply_free_dma_pool = pci_pool_create("reply_free pool", + ioc->pdev, sz, 16, 0); + if (!ioc->reply_free_dma_pool) { + printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_create " + "failed\n", ioc->name); + goto out; + } + ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL, + &ioc->reply_free_dma); + if (!ioc->reply_free) { + printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_alloc " + "failed\n", ioc->name); + goto out; + } + memset(ioc->reply_free, 0, sz); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free pool(0x%p): " + "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name, + ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_dma" + "(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma)); + total_sz += sz; + + /* reply post queue, 16 byte align */ + sz = ioc->reply_post_queue_depth * sizeof(Mpi2DefaultReplyDescriptor_t); + ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool", + ioc->pdev, sz, 16, 0); + if (!ioc->reply_post_free_dma_pool) { + printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_create " + "failed\n", ioc->name); + goto out; + } + ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool , + GFP_KERNEL, &ioc->reply_post_free_dma); + if (!ioc->reply_post_free) { + printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_alloc " + "failed\n", ioc->name); + goto out; + } + memset(ioc->reply_post_free, 0, sz); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply post free pool" + "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8, + sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_post_free_dma = " + "(0x%llx)\n", ioc->name, (unsigned long long) + ioc->reply_post_free_dma)); + total_sz += sz; + + ioc->config_page_sz = 512; + ioc->config_page = pci_alloc_consistent(ioc->pdev, + ioc->config_page_sz, &ioc->config_page_dma); + if (!ioc->config_page) { + printk(MPT2SAS_ERR_FMT "config page: pci_pool_alloc " + "failed\n", ioc->name); + goto out; + } + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config page(0x%p): size" + "(%d)\n", ioc->name, ioc->config_page, ioc->config_page_sz)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma" + "(0x%llx)\n", ioc->name, (unsigned long long)ioc->config_page_dma)); + total_sz += ioc->config_page_sz; + + printk(MPT2SAS_INFO_FMT "Allocated physical memory: size(%d kB)\n", + ioc->name, total_sz/1024); + printk(MPT2SAS_INFO_FMT "Current Controller Queue Depth(%d), " + "Max Controller Queue Depth(%d)\n", + ioc->name, ioc->shost->can_queue, facts->RequestCredit); + printk(MPT2SAS_INFO_FMT "Scatter Gather Elements per IO(%d)\n", + ioc->name, ioc->shost->sg_tablesize); + return 0; + + out: + _base_release_memory_pools(ioc); + return -ENOMEM; +} + + +/** + * base_get_iocstate - Get the current state of a MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @cooked: Request raw or cooked IOC state + * + * Returns all IOC Doorbell register bits if cooked==0, else just the + * Doorbell bits in MPI_IOC_STATE_MASK. + */ +u32 +base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked) +{ + u32 s, sc; + + s = readl(&ioc->chip->Doorbell); + sc = s & MPI2_IOC_STATE_MASK; + return cooked ? sc : s; +} + +/** + * _base_wait_on_iocstate - waiting on a particular ioc state + * @ioc_state: controller state { READY, OPERATIONAL, or RESET } + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_wait_on_iocstate(struct MPT2SAS_ADAPTER *ioc, u32 ioc_state, int timeout, + int sleep_flag) +{ + u32 count, cntdn; + u32 current_state; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + current_state = base_get_iocstate(ioc, 1); + if (current_state == ioc_state) + return 0; + if (count && current_state == MPI2_IOC_STATE_FAULT) + break; + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + return current_state; +} + +/** + * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by + * a write to the doorbell) + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + * Notes: MPI2_HIS_DOORBELL_INTERRUPT - set to one when IOC writes to doorbell. + */ +static int +_base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 int_status; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + int_status = readl(&ioc->chip->HostInterruptStatus); + if (int_status & MPI2_HIS_DOORBELL_INTERRUPT) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "successfull count(%d), timeout(%d)\n", ioc->name, + __func__, count, timeout)); + return 0; + } + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " + "int_status(%x)!\n", ioc->name, __func__, count, int_status); + return -EFAULT; +} + +/** + * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell. + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + * Notes: MPI2_HIS_IOP_DOORBELL_STATUS - set to one when host writes to + * doorbell. + */ +static int +_base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 int_status; + u32 doorbell; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + int_status = readl(&ioc->chip->HostInterruptStatus); + if (!(int_status & MPI2_HIS_IOP_DOORBELL_STATUS)) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "successfull count(%d), timeout(%d)\n", ioc->name, + __func__, count, timeout)); + return 0; + } else if (int_status & MPI2_HIS_DOORBELL_INTERRUPT) { + doorbell = readl(&ioc->chip->Doorbell); + if ((doorbell & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_FAULT) { + base_fault_info(ioc , doorbell); + return -EFAULT; + } + } else if (int_status == 0xFFFFFFFF) + goto out; + + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + out: + printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " + "int_status(%x)!\n", ioc->name, __func__, count, int_status); + return -EFAULT; +} + +#if defined(MUR) +/** + * _base_send_ioc_reset - send doorbell reset + * @ioc: per adapter object + * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_ioc_reset(struct MPT2SAS_ADAPTER *ioc, u8 reset_type, int timeout, + int sleep_flag) +{ + u32 ioc_state; + int r = 0; + + if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) { + printk(MPT2SAS_ERR_FMT "%s: unknown reset_type\n", + ioc->name, __func__); + return -EFAULT; + } + + if (!(ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY)) + return -EFAULT; + + printk(MPT2SAS_INFO_FMT "sending message unit reset !!\n", ioc->name); + + writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT, + &ioc->chip->Doorbell); + if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) { + r = -EFAULT; + goto out; + } + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, + timeout, sleep_flag); + if (ioc_state) { + printk(MPT2SAS_ERR_FMT "%s: failed going to ready state " + " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); + r = -EFAULT; + goto out; + } + out: + printk(MPT2SAS_INFO_FMT "message unit reset: %s\n", + ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); + return r; +} +#endif + +/** + * _base_handshake_req_reply_wait - send request thru doorbell interface + * @ioc: per adapter object + * @request_bytes: request length + * @request: pointer having request payload + * @reply_bytes: reply length + * @reply: pointer to reply payload + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes, + u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag) +{ + MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply; + int i; + u8 failed; + u16 dummy; + u32 *mfp; + + /* make sure doorbell is not in use */ + if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { + printk(MPT2SAS_ERR_FMT "doorbell is in use " + " (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* clear pending doorbell interrupts from previous state changes */ + if (readl(&ioc->chip->HostInterruptStatus) & + MPI2_HIS_IOC2SYS_DB_STATUS) + writel(0, &ioc->chip->HostInterruptStatus); + + /* send message to ioc */ + writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) | + ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)), + &ioc->chip->Doorbell); + + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "int failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + writel(0, &ioc->chip->HostInterruptStatus); + + if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "ack failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* send message 32-bits at a time */ + for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) { + writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell); + if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) + failed = 1; + } + + if (failed) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "sending request failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* now wait for the reply */ + if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "int failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* read the first two 16-bits, it gives the total length of the reply */ + reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "int failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + + for (i = 2; i < default_reply->MsgLength * 2; i++) { + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell " + "handshake int failed (line=%d)\n", ioc->name, + __LINE__); + return -EFAULT; + } + if (i >= reply_bytes/2) /* overflow case */ + dummy = readl(&ioc->chip->Doorbell); + else + reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + } + + _base_wait_for_doorbell_int(ioc, 5, sleep_flag); + if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { + dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "doorbell is in use " + " (line=%d)\n", ioc->name, __LINE__)); + } + + if (ioc->logging_level & MPT_DEBUG_INIT) { + mfp = (u32 *)reply; + printk(KERN_DEBUG "\toffset:data\n"); + for (i = 0; i < reply_bytes/4; i++) + printk(KERN_DEBUG "\t[0x%02x]:%08x\n", i*4, + le32_to_cpu(mfp[i])); + } + return 0; +} + +/** + * base_sas_iounit_control - send sas iounit control to FW + * @ioc: per adapter object + * @mpi_reply: the reply payload from FW + * @mpi_request: the request payload sent to FW + * + * The SAS IO Unit Control Request message allows the host to perform low-level + * operations, such as resets on the PHYs of the IO Unit, also allows the host + * to obtain the IOC assigned device handles for a device if it has other + * identifying information about the device, in addition allows the host to + * remove IOC resources associated with the device. + * + * Returns 0 for success, non-zero for failure. + */ +int +base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc, Mpi2SasIoUnitControlReply_t + *mpi_reply, Mpi2SasIoUnitControlRequest_t *mpi_request) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + u8 issue_reset; + int rc; + void *request; + u16 wait_state_count; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mutex_lock(&ioc->base_cmds.mutex); + + if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + + smid = base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->base_cmds.status = MPT2_CMD_PENDING; + request = base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)); + if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || + mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) + ioc->ioc_link_reset_in_progress = 1; + base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + msecs_to_jiffies(10000)); + if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || + mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) && + ioc->ioc_link_reset_in_progress) + ioc->ioc_link_reset_in_progress = 0; + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SasIoUnitControlRequest_t)/4); + if (!(ioc->base_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->base_cmds.reply, + sizeof(Mpi2SasIoUnitControlReply_t)); + else + memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t)); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + goto out; + + issue_host_reset: + if (issue_reset) + base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + rc = -EFAULT; + out: + mutex_unlock(&ioc->base_cmds.mutex); + return rc; +} + + +/** + * base_scsi_enclosure_processor - sending request to sep device + * @ioc: per adapter object + * @mpi_reply: the reply payload from FW + * @mpi_request: the request payload sent to FW + * + * The SCSI Enclosure Processor request message causes the IOC to + * communicate with SES devices to control LED status signals. + * + * Returns 0 for success, non-zero for failure. + */ +int +base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, Mpi2SepReply_t + *mpi_reply, Mpi2SepRequest_t *mpi_request) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + u8 issue_reset; + int rc; + void *request; + u16 wait_state_count; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mutex_lock(&ioc->base_cmds.mutex); + + if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + + smid = base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->base_cmds.status = MPT2_CMD_PENDING; + request = base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memcpy(request, mpi_request, sizeof(Mpi2SepReply_t)); + base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + msecs_to_jiffies(10000)); + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SepRequest_t)/4); + if (!(ioc->base_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->base_cmds.reply, + sizeof(Mpi2SepReply_t)); + else + memset(mpi_reply, 0, sizeof(Mpi2SepReply_t)); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + goto out; + + issue_host_reset: + if (issue_reset) + base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + rc = -EFAULT; + out: + mutex_unlock(&ioc->base_cmds.mutex); + return rc; +} + +/** + * _base_get_port_facts - obtain port facts reply and save in ioc + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag) +{ + Mpi2PortFactsRequest_t mpi_request; + Mpi2PortFactsReply_t mpi_reply, *pfacts; + int mpi_reply_sz, mpi_request_sz, r; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mpi_reply_sz = sizeof(Mpi2PortFactsReply_t); + mpi_request_sz = sizeof(Mpi2PortFactsRequest_t); + memset(&mpi_request, 0, mpi_request_sz); + mpi_request.Function = MPI2_FUNCTION_PORT_FACTS; + mpi_request.PortNumber = port; + r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, + (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); + + if (r != 0) { + printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + pfacts = &ioc->pfacts[port]; + memset(pfacts, 0, sizeof(Mpi2PortFactsReply_t)); + pfacts->PortNumber = mpi_reply.PortNumber; + pfacts->VP_ID = mpi_reply.VP_ID; + pfacts->VF_ID = mpi_reply.VF_ID; + pfacts->MaxPostedCmdBuffers = + le16_to_cpu(mpi_reply.MaxPostedCmdBuffers); + + return 0; +} + +/** + * _base_get_ioc_facts - obtain ioc facts reply and save in ioc + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2IOCFactsRequest_t mpi_request; + Mpi2IOCFactsReply_t mpi_reply, *facts; + int mpi_reply_sz, mpi_request_sz, r; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t); + mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t); + memset(&mpi_request, 0, mpi_request_sz); + mpi_request.Function = MPI2_FUNCTION_IOC_FACTS; + r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, + (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); + + if (r != 0) { + printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + facts = &ioc->facts; + memset(facts, 0, sizeof(Mpi2IOCFactsReply_t)); + facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion); + facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion); + facts->VP_ID = mpi_reply.VP_ID; + facts->VF_ID = mpi_reply.VF_ID; + facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions); + facts->MaxChainDepth = mpi_reply.MaxChainDepth; + facts->WhoInit = mpi_reply.WhoInit; + facts->NumberOfPorts = mpi_reply.NumberOfPorts; + facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit); + facts->MaxReplyDescriptorPostQueueDepth = + le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth); + facts->ProductID = le16_to_cpu(mpi_reply.ProductID); + facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities); + if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID)) + ioc->ir_firmware = 1; + facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word); + facts->IOCRequestFrameSize = + le16_to_cpu(mpi_reply.IOCRequestFrameSize); + facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators); + facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets); + ioc->shost->max_id = -1; + facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders); + facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures); + facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags); + facts->HighPriorityCredit = + le16_to_cpu(mpi_reply.HighPriorityCredit); + facts->ReplyFrameSize = mpi_reply.ReplyFrameSize; + facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle); + + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hba queue depth(%d), " + "max chains per io(%d)\n", ioc->name, facts->RequestCredit, + facts->MaxChainDepth)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request frame size(%d), " + "reply frame size(%d)\n", ioc->name, + facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4)); + return 0; +} + +/** + * _base_send_ioc_init - send ioc_init to firmware + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag) +{ + Mpi2IOCInitRequest_t mpi_request; + Mpi2IOCInitReply_t mpi_reply; + int r; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t)); + mpi_request.Function = MPI2_FUNCTION_IOC_INIT; + mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER; + mpi_request.VF_ID = VF_ID; + mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION); + mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION); + + /* In MPI Revision I (0xA), the SystemReplyFrameSize(offset 0x18) was + * removed and made reserved. For those with older firmware will need + * this fix. It was decided that the Reply and Request frame sizes are + * the same. + */ + if ((ioc->facts.HeaderVersion >> 8) < 0xA) { + mpi_request.Reserved7 = cpu_to_le16(ioc->reply_sz); +/* mpi_request.SystemReplyFrameSize = + * cpu_to_le16(ioc->reply_sz); + */ + } + + mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4); + mpi_request.ReplyDescriptorPostQueueDepth = + cpu_to_le16(ioc->reply_post_queue_depth); + mpi_request.ReplyFreeQueueDepth = + cpu_to_le16(ioc->reply_free_queue_depth); + +#if BITS_PER_LONG > 32 + mpi_request.SenseBufferAddressHigh = + cpu_to_le32(ioc->sense_dma >> 32); + mpi_request.SystemReplyAddressHigh = + cpu_to_le32(ioc->reply_dma >> 32); + mpi_request.SystemRequestFrameBaseAddress = + cpu_to_le64(ioc->request_dma); + mpi_request.ReplyFreeQueueAddress = + cpu_to_le64(ioc->reply_free_dma); + mpi_request.ReplyDescriptorPostQueueAddress = + cpu_to_le64(ioc->reply_post_free_dma); +#else + mpi_request.SystemRequestFrameBaseAddress = + cpu_to_le32(ioc->request_dma); + mpi_request.ReplyFreeQueueAddress = + cpu_to_le32(ioc->reply_free_dma); + mpi_request.ReplyDescriptorPostQueueAddress = + cpu_to_le32(ioc->reply_post_free_dma); +#endif + + if (ioc->logging_level & MPT_DEBUG_INIT) { + u32 *mfp; + int i; + + mfp = (u32 *)&mpi_request; + printk(KERN_DEBUG "\toffset:data\n"); + for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++) + printk(KERN_DEBUG "\t[0x%02x]:%08x\n", i*4, + le32_to_cpu(mfp[i])); + } + + r = _base_handshake_req_reply_wait(ioc, + sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request, + sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10, + sleep_flag); + + if (r != 0) { + printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + if (mpi_reply.IOCStatus != MPI2_IOCSTATUS_SUCCESS || + mpi_reply.IOCLogInfo) { + printk(MPT2SAS_ERR_FMT "%s: failed\n", ioc->name, __func__); + r = -EIO; + } + + return 0; +} + +/** + * _base_send_port_enable - send port_enable(discovery stuff) to firmware + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag) +{ + Mpi2PortEnableRequest_t *mpi_request; + u32 ioc_state; + unsigned long timeleft; + int r = 0; + u16 smid; + + printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name); + + if (ioc->base_cmds.status & MPT2_CMD_PENDING) { + printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + + ioc->base_cmds.status = MPT2_CMD_PENDING; + mpi_request = base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); + mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; + mpi_request->VF_ID = VF_ID; + + base_put_smid_default(ioc, smid, VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + 300*HZ); + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2PortEnableRequest_t)/4); + if (ioc->base_cmds.status & MPT2_CMD_RESET) + r = -EFAULT; + else + r = -ETIME; + goto out; + } else + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: complete\n", + ioc->name, __func__)); + + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL, + 60, sleep_flag); + if (ioc_state) { + printk(MPT2SAS_ERR_FMT "%s: failed going to operational state " + " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); + r = -EFAULT; + } + out: + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + printk(MPT2SAS_INFO_FMT "port enable: %s\n", + ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); + return r; +} + +/** + * _base_unmask_events - turn on notification for this event + * @ioc: per adapter object + * @event: firmware event + * + * The mask is stored in ioc->event_masks. + */ +static void +_base_unmask_events(struct MPT2SAS_ADAPTER *ioc, u16 event) +{ + u32 desired_event; + + if (event >= 128) + return; + + desired_event = (1 << (event % 32)); + + if (event < 32) + ioc->event_masks[0] &= ~desired_event; + else if (event < 64) + ioc->event_masks[1] &= ~desired_event; + else if (event < 96) + ioc->event_masks[2] &= ~desired_event; + else if (event < 128) + ioc->event_masks[3] &= ~desired_event; +} + +/** + * _base_event_notification - send event notification + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_event_notification(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag) +{ + Mpi2EventNotificationRequest_t *mpi_request; + unsigned long timeleft; + u16 smid; + int r = 0; + int i; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->base_cmds.status & MPT2_CMD_PENDING) { + printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + ioc->base_cmds.status = MPT2_CMD_PENDING; + mpi_request = base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t)); + mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; + mpi_request->VF_ID = VF_ID; + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + mpi_request->EventMasks[i] = + le32_to_cpu(ioc->event_masks[i]); + base_put_smid_default(ioc, smid, VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ); + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2EventNotificationRequest_t)/4); + if (ioc->base_cmds.status & MPT2_CMD_RESET) + r = -EFAULT; + else + r = -ETIME; + } else + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: complete\n", + ioc->name, __func__)); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + return r; +} + +/** + * base_validate_event_type - validating event types + * @ioc: per adapter object + * @event: firmware event + * + * This will turn on firmware event notification when application + * ask for that event. We don't mask events that are already enabled. + */ +void +base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type) +{ + int i, j; + u32 event_mask, desired_event; + u8 send_update_to_fw; + + for (i = 0, send_update_to_fw = 0; i < + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) { + event_mask = ~event_type[i]; + desired_event = 1; + for (j = 0; j < 32; j++) { + if (!(event_mask & desired_event) && + (ioc->event_masks[i] & desired_event)) { + ioc->event_masks[i] &= ~desired_event; + send_update_to_fw = 1; + } + desired_event = (desired_event << 1); + } + } + + if (!send_update_to_fw) + return; + + mutex_lock(&ioc->base_cmds.mutex); + _base_event_notification(ioc, 0, CAN_SLEEP); + mutex_unlock(&ioc->base_cmds.mutex); +} + +/** + * _base_diag_reset - the "big hammer" start of day reset + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + u32 host_diagnostic; + u32 ioc_state; + u32 count; + u32 hcb_size; + + printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name); + + base_save_msix_table(ioc); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "clear interrupts\n", + ioc->name)); + writel(0, &ioc->chip->HostInterruptStatus); + + count = 0; + do { + /* Write magic sequence to WriteSequence register + * Loop until in diagnostic mode + */ + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "write magic " + "sequence\n", ioc->name)); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence); + + /* wait 100 msec */ + if (sleep_flag == CAN_SLEEP) + msleep(100); + else + mdelay(100); + + if (count++ > 20) + goto out; + + host_diagnostic = readl(&ioc->chip->HostDiagnostic); + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "wrote magic " + "sequence: count(%d), host_diagnostic(0x%08x)\n", + ioc->name, count, host_diagnostic)); + + } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); + + hcb_size = readl(&ioc->chip->HCBSize); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "diag reset: issued\n", + ioc->name)); + writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, + &ioc->chip->HostDiagnostic); + + /* don't access any registers for 50 milliseconds */ + msleep(50); + + /* 300 second max wait */ + for (count = 0; count < 3000000 ; count++) { + + host_diagnostic = readl(&ioc->chip->HostDiagnostic); + + if (host_diagnostic == 0xFFFFFFFF) + goto out; + if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) + break; + + /* wait 100 msec */ + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + mdelay(1); + } + + if (host_diagnostic & MPI2_DIAG_HCB_MODE) { + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "restart the adapter " + "assuming the HCB Address points to good F/W\n", + ioc->name)); + host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK; + host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW; + writel(host_diagnostic, &ioc->chip->HostDiagnostic); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "re-enable the HCDW\n", ioc->name)); + writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE, + &ioc->chip->HCBSize); + } + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "restart the adapter\n", + ioc->name)); + writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET, + &ioc->chip->HostDiagnostic); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "disable writes to the " + "diagnostic register\n", ioc->name)); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "Wait for FW to go to the " + "READY state\n", ioc->name)); + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20, + sleep_flag); + if (ioc_state) { + printk(MPT2SAS_ERR_FMT "%s: failed going to ready state " + " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); + goto out; + } + + base_restore_msix_table(ioc); + printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name); + return 0; + + out: + printk(MPT2SAS_ERR_FMT "diag reset: FAILED\n", ioc->name); + return -EFAULT; +} + +/** + * _base_make_ioc_ready - put controller in READY state + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * @type: FORCE_BIG_HAMMER or SOFT_RESET + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type) +{ + u32 ioc_state; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + ioc_state = base_get_iocstate(ioc, 0); + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: ioc_state(0x%08x)\n", + ioc->name, __func__, ioc_state)); + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) + return 0; + + if (ioc_state & MPI2_DOORBELL_USED) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell " + "active!\n", ioc->name)); + goto issue_diag_reset; + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + base_fault_info(ioc, ioc_state & MPI2_DOORBELL_DATA_MASK); + goto issue_diag_reset; + } + + if (type == FORCE_BIG_HAMMER) + goto issue_diag_reset; + +#if defined(MUR) + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL) + if (!(_base_send_ioc_reset(ioc, + MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) + return 0; +#endif + + issue_diag_reset: + return _base_diag_reset(ioc, CAN_SLEEP); +} + +/** + * _base_make_ioc_operational - put controller in OPERATIONAL state + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + int sleep_flag) +{ + int r, i; + unsigned long flags; + u32 reply_address; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + /* initialize the scsi lookup free list */ + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + INIT_LIST_HEAD(&ioc->free_list); + for (i = 0; i < ioc->request_depth; i++) { + ioc->scsi_lookup[i].cb_idx = 0xFF; + list_add_tail(&ioc->scsi_lookup[i].tracker_list, + &ioc->free_list); + } + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + /* initialize Reply Free Queue */ + for (i = 0, reply_address = (u32)ioc->reply_dma ; + i < ioc->reply_free_queue_depth ; i++, reply_address += + ioc->reply_sz) + ioc->reply_free[i] = cpu_to_le32(reply_address); + + /* initialize Reply Post Free Queue */ + for (i = 0; i < ioc->reply_post_queue_depth; i++) + ioc->reply_post_free[i].Words = + 0xFFFFFFFFFFFFFFFFULL; + + r = _base_send_ioc_init(ioc, VF_ID, sleep_flag); + if (r) + return r; + + /* initialize the index's */ + ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1; + ioc->reply_post_host_index = 0; + writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex); + writel(0, &ioc->chip->ReplyPostHostIndex); + + _base_unmask_interrupts(ioc); + r = _base_event_notification(ioc, VF_ID, sleep_flag); + if (r) + return r; + + if (sleep_flag == CAN_SLEEP) + _base_static_config_pages(ioc); + + r = _base_send_port_enable(ioc, VF_ID, sleep_flag); + if (r) + return r; + + return r; +} + +/** + * base_free_resources - free resources controller resources (io/irq/memap) + * @ioc: per adapter object + * + * Return nothing. + */ +void +base_free_resources(struct MPT2SAS_ADAPTER *ioc) +{ + struct pci_dev *pdev = ioc->pdev; + + dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + _base_mask_interrupts(ioc); + _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + if (ioc->pci_irq) { + synchronize_irq(pdev->irq); + free_irq(ioc->pci_irq, ioc); + } + base_disable_msix(ioc); + if (ioc->chip_phys) + iounmap(ioc->chip); + ioc->pci_irq = -1; + ioc->chip_phys = 0; + pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return; +} + +/** + * base_attach - attach controller instance + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +base_attach(struct MPT2SAS_ADAPTER *ioc) +{ + int r, i; + unsigned long flags; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + r = base_map_resources(ioc); + if (r) + return r; + + r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + if (r) + goto out_free_resources; + + r = _base_get_ioc_facts(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + r = _base_allocate_memory_pools(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + init_waitqueue_head(&ioc->reset_wq); + + /* base internal command bits */ + mutex_init(&ioc->base_cmds.mutex); + init_completion(&ioc->base_cmds.done); + ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + + /* transport internal command bits */ + ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->transport_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->transport_cmds.mutex); + init_completion(&ioc->transport_cmds.done); + + /* task management internal command bits */ + ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->tm_cmds.mutex); + init_completion(&ioc->tm_cmds.done); + + /* config page internal command bits */ + ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->config_cmds.mutex); + init_completion(&ioc->config_cmds.done); + + /* ctl module internal command bits */ + ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->ctl_cmds.mutex); + init_completion(&ioc->ctl_cmds.done); + + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + ioc->event_masks[i] = -1; + + /* here we enable the events we care about */ + _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY); + _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE); + _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST); + _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); + _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE); + _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST); + _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME); + _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK); + _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS); + _base_unmask_events(ioc, MPI2_EVENT_TASK_SET_FULL); + + ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts, + sizeof(Mpi2PortFactsReply_t), GFP_KERNEL); + if (!ioc->pfacts) + goto out_free_resources; + + for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) { + r = _base_get_port_facts(ioc, i, CAN_SLEEP); + if (r) + goto out_free_resources; + } + r = _base_make_ioc_operational(ioc, 0, CAN_SLEEP); + if (r) + goto out_free_resources; + + /* initialize fault polling */ + INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); + snprintf(ioc->fault_reset_work_q_name, + sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id); + ioc->fault_reset_work_q = + create_singlethread_workqueue(ioc->fault_reset_work_q_name); + if (!ioc->fault_reset_work_q) { + printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n", + ioc->name, __func__, __LINE__); + goto out_free_resources; + } + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + return 0; + + out_free_resources: + + ioc->remove_host = 1; + base_free_resources(ioc); + _base_release_memory_pools(ioc); + kfree(ioc->tm_cmds.reply); + kfree(ioc->transport_cmds.reply); + kfree(ioc->config_cmds.reply); + kfree(ioc->base_cmds.reply); + kfree(ioc->ctl_cmds.reply); + kfree(ioc->pfacts); + ioc->ctl_cmds.reply = NULL; + ioc->base_cmds.reply = NULL; + ioc->tm_cmds.reply = NULL; + ioc->transport_cmds.reply = NULL; + ioc->config_cmds.reply = NULL; + ioc->pfacts = NULL; + return r; +} + + +/** + * base_detach - remove controller instance + * @ioc: per adapter object + * + * Return nothing. + */ +void +base_detach(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + struct workqueue_struct *wq; + + dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + wq = ioc->fault_reset_work_q; + ioc->fault_reset_work_q = NULL; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + if (!cancel_delayed_work(&ioc->fault_reset_work)) + flush_workqueue(wq); + destroy_workqueue(wq); + + base_free_resources(ioc); + _base_release_memory_pools(ioc); + kfree(ioc->pfacts); + kfree(ioc->ctl_cmds.reply); + kfree(ioc->base_cmds.reply); + kfree(ioc->tm_cmds.reply); + kfree(ioc->transport_cmds.reply); + kfree(ioc->config_cmds.reply); +} + +/** + * _base_reset_handler - reset callback handler (for base) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, + * MPT2_IOC_DONE_RESET + * + * Return nothing. + */ +static void +_base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) +{ + switch (reset_phase) { + case MPT2_IOC_PRE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + break; + case MPT2_IOC_AFTER_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->transport_cmds.status & MPT2_CMD_PENDING) { + ioc->transport_cmds.status |= MPT2_CMD_RESET; + base_free_smid(ioc, ioc->transport_cmds.smid); + complete(&ioc->transport_cmds.done); + } + if (ioc->base_cmds.status & MPT2_CMD_PENDING) { + ioc->base_cmds.status |= MPT2_CMD_RESET; + base_free_smid(ioc, ioc->base_cmds.smid); + complete(&ioc->base_cmds.done); + } + if (ioc->config_cmds.status & MPT2_CMD_PENDING) { + ioc->config_cmds.status |= MPT2_CMD_RESET; + base_free_smid(ioc, ioc->config_cmds.smid); + complete(&ioc->config_cmds.done); + } + break; + case MPT2_IOC_DONE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + break; + } + scsih_reset_handler(ioc, reset_phase); + ctl_reset_handler(ioc, reset_phase); +} + +/** + * _wait_for_commands_to_complete - reset controller + * @ioc: Pointer to MPT_ADAPTER structure + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * This function waiting(3s) for all pending commands to complete + * prior to putting controller in reset. + */ +static void +_wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + u32 ioc_state; + unsigned long flags; + u16 i; + + ioc->pending_io_count = 0; + if (sleep_flag != CAN_SLEEP) + return; + + ioc_state = base_get_iocstate(ioc, 0); + if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) + return; + + /* pending command count */ + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + for (i = 0; i < ioc->request_depth; i++) + if (ioc->scsi_lookup[i].cb_idx != 0xFF) + ioc->pending_io_count++; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + if (!ioc->pending_io_count) + return; + + /* wait for pending commands to complete */ + wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 3 * HZ); +} + +/** + * base_hard_reset_handler - reset controller + * @ioc: Pointer to MPT_ADAPTER structure + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * @type: FORCE_BIG_HAMMER or SOFT_RESET + * + * Returns 0 for success, non-zero for failure. + */ +int +base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type) +{ + int r, i; + unsigned long flags; + + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_ERR_FMT "%s: busy\n", + ioc->name, __func__); + return -EBUSY; + } + ioc->ioc_reset_in_progress = 1; + ioc->shost_recovery = 1; + if (ioc->shost->shost_state == SHOST_RUNNING) { + /* set back to SHOST_RUNNING in mpt2sas_scsih.c */ + scsi_host_set_state(ioc->shost, SHOST_RECOVERY); + printk(MPT2SAS_INFO_FMT "putting controller into " + "SHOST_RECOVERY\n", ioc->name); + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + _base_reset_handler(ioc, MPT2_IOC_PRE_RESET); + _wait_for_commands_to_complete(ioc, sleep_flag); + _base_mask_interrupts(ioc); + r = _base_make_ioc_ready(ioc, sleep_flag, type); + if (r) + goto out; + _base_reset_handler(ioc, MPT2_IOC_AFTER_RESET); + for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) + r = _base_make_ioc_operational(ioc, ioc->pfacts[i].VF_ID, + sleep_flag); + if (!r) + _base_reset_handler(ioc, MPT2_IOC_DONE_RESET); + out: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: %s\n", + ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED"))); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + ioc->ioc_reset_in_progress = 0; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + return r; +} --- a/drivers/scsi/mpt2sas/mpt2sas_base.h 1969-12-31 17:00:00.000000000 -0700 +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h 2009-02-24 14:17:02.000000000 -0700 @@ -0,0 +1,781 @@ +/* + * This is the Fusion MPT base driver providing common API layer interface + * for access to MPT (Message Passing Technology) firmware. + * + * This code is based on drivers/scsi/mpt2sas/mpt2_base.h + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@xxxxxxx) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT2SAS_BASE_H_INCLUDED +#define MPT2SAS_BASE_H_INCLUDED + +#include "mpi/mpi2_type.h" +#include "mpi/mpi2.h" +#include "mpi/mpi2_ioc.h" +#include "mpi/mpi2_cnfg.h" +#include "mpi/mpi2_init.h" +#include "mpi/mpi2_raid.h" +#include "mpi/mpi2_targ.h" +#include "mpi/mpi2_tool.h" +#include "mpi/mpi2_sas.h" + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_transport_sas.h> +#include <scsi/scsi_dbg.h> + +#include "mpt2sas_debug.h" + +/* driver versioning info */ +#define MPT2SAS_DRIVER_NAME "mpt2sas" +#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@xxxxxxx>" +#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" +#define MPT2SAS_DRIVER_VERSION "00.100.11.08" +#define MPT2SAS_MAJOR_VERSION 00 +#define MPT2SAS_MINOR_VERSION 100 +#define MPT2SAS_BUILD_VERSION 11 +#define MPT2SAS_RELEASE_VERSION 08 + +/* + * Set MPT2SAS_SG_DEPTH value based on user input. + */ +#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE +#if CONFIG_SCSI_MPT2SAS_MAX_SGE < 16 +#define MPT2SAS_SG_DEPTH 16 +#elif CONFIG_SCSI_MPT2SAS_MAX_SGE > 128 +#define MPT2SAS_SG_DEPTH 128 +#else +#define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE +#endif +#else +#define MPT2SAS_SG_DEPTH 128 /* MAX_HW_SEGMENTS */ +#endif + + +/* + * Generic Defines + */ +#define MPT2SAS_SATA_QUEUE_DEPTH 32 +#define MPT2SAS_SAS_QUEUE_DEPTH 254 +#define MPT2SAS_RAID_QUEUE_DEPTH 128 + +#define MPT_NAME_LENGTH 32 /* generic length of strings */ +#define MPT_STRING_LENGTH 64 + +#define MPT_MAX_CALLBACKS 16 + +#define CAN_SLEEP 1 +#define NO_SLEEP 0 + +#define INTERNAL_CMDS_COUNT 10 /* reserved cmds */ + +#define MPI2_HIM_MASK 0xFFFFFFFF /* mask every bit*/ + +#define MPT2SAS_INVALID_DEVICE_HANDLE 0xFFFF + + +/* + * reset phases + */ +#define MPT2_IOC_PRE_RESET 1 /* prior to host reset */ +#define MPT2_IOC_AFTER_RESET 2 /* just after host reset */ +#define MPT2_IOC_DONE_RESET 3 /* links re-initialized */ + +/* + * logging format + */ +#define MPT2SAS_FMT "%s: " +#define MPT2SAS_DEBUG_FMT KERN_DEBUG MPT2SAS_FMT +#define MPT2SAS_INFO_FMT KERN_INFO MPT2SAS_FMT +#define MPT2SAS_NOTE_FMT KERN_NOTICE MPT2SAS_FMT +#define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT +#define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT + +/* + * per target private data + */ +#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 +#define MPT_TARGET_FLAGS_VOLUME 0x02 +#define MPT_TARGET_FLAGS_DELETED 0x04 + +/** + * struct MPT2SAS_TARGET - starget private hostdata + * @starget: starget object + * @sas_address: target sas address + * @handle: device handle + * @num_luns: number luns + * @flags: MPT_TARGET_FLAGS_XXX flags + * @deleted: target flaged for deletion + * @tm_busy: target is busy with TM request. + */ +struct MPT2SAS_TARGET { + struct scsi_target *starget; + u64 sas_address; + u16 handle; + int num_luns; + u32 flags; + u8 deleted; + u8 tm_busy; +}; + +/* + * per device private data + */ +#define MPT_DEVICE_FLAGS_INIT 0x01 +#define MPT_DEVICE_TLR_ON 0x02 + +/** + * struct MPT2SAS_DEVICE - sdev private hostdata + * @sas_target: starget private hostdata + * @lun: lun number + * @flags: MPT_DEVICE_XXX flags + * @configured_lun: lun is configured + * @block: device is in SDEV_BLOCK state + * @tlr_snoop_check: flag used in determining whether to disable TLR + */ +struct MPT2SAS_DEVICE { + struct MPT2SAS_TARGET *sas_target; + unsigned int lun; + u32 flags; + u8 configured_lun; + u8 block; + u8 tlr_snoop_check; +}; + +#define MPT2_CMD_NOT_USED 0x8000 /* free */ +#define MPT2_CMD_COMPLETE 0x0001 /* completed */ +#define MPT2_CMD_PENDING 0x0002 /* pending */ +#define MPT2_CMD_REPLY_VALID 0x0004 /* reply is valid */ +#define MPT2_CMD_RESET 0x0008 /* host reset dropped the command */ + +/** + * struct _internal_cmd - internal commands struct + * @mutex: mutex + * @done: completion + * @reply: reply message pointer + * @status: MPT2_CMD_XXX status + * @smid: system message id + */ +struct _internal_cmd { + struct mutex mutex; + struct completion done; + void *reply; + u16 status; + u16 smid; +}; + +/* + * SAS Topology Structures + */ + +/** + * struct _sas_device - attached device information + * @list: sas device list + * @starget: starget object + * @sas_address: device sas address + * @device_name: retrieved from the SAS IDENTIFY frame. + * @handle: device handle + * @parent_handle: handle to parent device + * @enclosure_handle: enclosure handle + * @enclosure_logical_id: enclosure logical identifier + * @volume_handle: volume handle (valid when hidden raid member) + * @volume_wwid: volume unique identifier + * @device_info: bitfield provides detailed info about the device + * @id: target id + * @channel: target channel + * @slot: number number + * @hidden_raid_component: set to 1 when this is a raid member + * @responding: used in _scsih_sas_device_mark_responding + */ +struct _sas_device { + struct list_head list; + struct scsi_target *starget; + u64 sas_address; + u64 device_name; + u16 handle; + u16 parent_handle; + u16 enclosure_handle; + u64 enclosure_logical_id; + u16 volume_handle; + u64 volume_wwid; + u32 device_info; + int id; + int channel; + u16 slot; + u8 hidden_raid_component; + u8 responding; +}; + +/** + * struct _raid_device - raid volume link list + * @list: sas device list + * @starget: starget object + * @sdev: scsi device struct (volumes are single lun) + * @wwid: unique identifier for the volume + * @handle: device handle + * @id: target id + * @channel: target channel + * @volume_type: the raid level + * @device_info: bitfield provides detailed info about the hidden components + * @num_pds: number of hidden raid components + * @responding: used in _scsih_raid_device_mark_responding + */ +struct _raid_device { + struct list_head list; + struct scsi_target *starget; + struct scsi_device *sdev; + u64 wwid; + u16 handle; + int id; + int channel; + u8 volume_type; + u32 device_info; + u8 num_pds; + u8 responding; +}; + +/** + * struct _boot_device - boot device info + * @is_raid: flag to indicate whether this is volume + * @device: holds pointer for either struct _sas_device or + * struct _raid_device + */ +struct _boot_device { + u8 is_raid; + void *device; +}; + +/** + * struct _sas_port - wide/narrow sas port information + * @port_list: list of ports belonging to expander + * @handle: device handle for this port + * @sas_address: sas address of this port + * @num_phys: number of phys belonging to this port + * @remote_identify: attached device identification + * @rphy: sas transport rphy object + * @port: sas transport wide/narrow port object + * @phy_list: _sas_phy list objects belonging to this port + */ +struct _sas_port { + struct list_head port_list; + u16 handle; + u64 sas_address; + u8 num_phys; + struct sas_identify remote_identify; + struct sas_rphy *rphy; + struct sas_port *port; + struct list_head phy_list; +}; + +/** + * struct _sas_phy - phy information + * @port_siblings: list of phys belonging to a port + * @identify: phy identification + * @remote_identify: attached device identification + * @phy: sas transport phy object + * @phy_id: unique phy id + * @handle: device handle for this phy + * @attached_handle: device handle for attached device + */ +struct _sas_phy { + struct list_head port_siblings; + struct sas_identify identify; + struct sas_identify remote_identify; + struct sas_phy *phy; + u8 phy_id; + u16 handle; + u16 attached_handle; +}; + +/** + * struct _sas_node - sas_host/expander information + * @list: list of expanders + * @parent_dev: parent device class + * @num_phys: number phys belonging to this sas_host/expander + * @sas_address: sas address of this sas_host/expander + * @handle: handle for this sas_host/expander + * @parent_handle: parent handle + * @enclosure_handle: handle for this a member of an enclosure + * @device_info: bitwise defining capabilities of this sas_host/expander + * @responding: used in _scsih_expander_device_mark_responding + * @phy: a list of phys that make up this sas_host/expander + * @sas_port_list: list of ports attached to this sas_host/expander + */ +struct _sas_node { + struct list_head list; + struct device *parent_dev; + u8 num_phys; + u64 sas_address; + u16 handle; + u16 parent_handle; + u16 enclosure_handle; + u64 enclosure_logical_id; + u8 responding; + struct _sas_phy *phy; + struct list_head sas_port_list; +}; + +/** + * enum reset_type - reset state + * @FORCE_BIG_HAMMER: issue diagnostic reset + * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer + */ +enum reset_type { + FORCE_BIG_HAMMER, + SOFT_RESET, +}; + +/** + * struct request_tracker - firmware request tracker + * @smid: system message id + * @scmd: scsi request pointer + * @cb_idx: callback index + * @chain_list: list of chains associated to this IO + * @tracker_list: list of free request (ioc->free_list) + */ +struct request_tracker { + u16 smid; + struct scsi_cmnd *scmd; + u8 cb_idx; + struct list_head tracker_list; +}; + +typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); + +/** + * struct MPT2SAS_ADAPTER - per adapter struct + * @list: ioc_list + * @shost: shost object + * @id: unique adapter id + * @pci_irq: irq number + * @name: generic ioc string + * @tmp_string: tmp string used for logging + * @pdev: pci pdev object + * @chip: memory mapped register space + * @chip_phys: physical addrss prior to mapping + * @pio_chip: I/O mapped register space + * @logging_level: see mpt2sas_debug.h + * @ir_firmware: IR firmware present + * @bars: bitmask of BAR's that must be configured + * @mask_interrupts: ignore interrupt + * @fault_reset_work_q_name: fw fault work queue + * @fault_reset_work_q: "" + * @fault_reset_work: "" + * @firmware_event_name: fw event work queue + * @firmware_event_thread: "" + * @fw_events_off: flag to turn off fw event handling + * @fw_event_lock: + * @fw_event_list: list of fw events + * @aen_event_read_flag: event log was read + * @broadcast_aen_busy: broadcast aen waiting to be serviced + * @ioc_reset_in_progress: host reset in progress + * @ioc_reset_in_progress_lock: + * @ioc_link_reset_in_progress: phy/hard reset in progress + * @ignore_loginfos: ignore loginfos during task managment + * @remove_host: flag for when driver unloads, to avoid sending dev resets + * @wait_for_port_enable_to_complete: + * @msix_enable: flag indicating msix is enabled + * @msix_vector_count: number msix vectors + * @msix_table: virt address to the msix table + * @msix_table_backup: backup msix table + * @scsi_io_cb_idx: shost generated commands + * @tm_cb_idx: task management commands + * @transport_cb_idx: transport internal commands + * @ctl_cb_idx: clt internal commands + * @base_cb_idx: base internal commands + * @config_cb_idx: base internal commands + * @base_cmds: + * @transport_cmds: + * @tm_cmds: + * @ctl_cmds: + * @config_cmds: + * @base_add_sg_single: handler for either 32/64 bit sgl's + * @event_type: bits indicating which events to log + * @event_context: unique id for each logged event + * @event_log: event log pointer + * @event_masks: events that are masked + * @facts: static facts data + * @pfacts: static port facts data + * @manu_pg0: static manufacturing page 0 + * @bios_pg2: static bios page 2 + * @bios_pg3: static bios page 3 + * @ioc_pg8: static ioc page 8 + * @iounit_pg0: static iounit page 0 + * @iounit_pg1: static iounit page 1 + * @sas_hba: sas host object + * @sas_expander_list: expander object list + * @sas_node_lock: + * @sas_device_list: sas device object list + * @sas_device_init_list: sas device object list (used only at init time) + * @sas_device_lock: + * @io_missing_delay: time for IO completed by fw when PDR enabled + * @device_missing_delay: time for device missing by fw when PDR enabled + * @config_page_sz: config page size + * @config_page: reserve memory for config page payload + * @config_page_dma: + * @sge_size: sg element size for either 32/64 bit + * @request_depth: hba request queue depth + * @request_sz: per request frame size + * @request: pool of request frames + * @request_dma: + * @request_dma_sz: + * @scsi_lookup: firmware request tracker list + * @scsi_lookup_lock: + * @free_list: free list of request + * @chain: pool of chains + * @pending_io_count: + * @reset_wq: + * @chain_dma: + * @max_sges_in_main_message: number sg elements in main message + * @max_sges_in_chain_message: number sg elements per chain + * @chains_needed_per_io: max chains per io + * @chain_offset_value_for_main_message: location 1st sg in main + * @chain_depth: total chains allocated + * @sense: pool of sense + * @sense_dma: + * @sense_dma_pool: + * @reply_depth: hba reply queue depth: + * @reply_sz: per reply frame size: + * @reply: pool of replys: + * @reply_dma: + * @reply_dma_pool: + * @reply_free_queue_depth: reply free depth + * @reply_free: pool for reply free queue (32 bit addr) + * @reply_free_dma: + * @reply_free_dma_pool: + * @reply_free_host_index: tail index in pool to insert free replys + * @reply_post_queue_depth: reply post queue depth + * @reply_post_free: pool for reply post (64bit descriptor) + * @reply_post_free_dma: + * @reply_post_free_dma_pool: + * @reply_post_host_index: head index in the pool where FW completes IO + */ +struct MPT2SAS_ADAPTER { + struct list_head list; + struct Scsi_Host *shost; + u8 id; + u32 pci_irq; + char name[MPT_NAME_LENGTH]; + char tmp_string[MPT_STRING_LENGTH]; + struct pci_dev *pdev; + Mpi2SystemInterfaceRegs_t __iomem *chip; + unsigned long chip_phys; + unsigned long pio_chip; + int logging_level; + u8 ir_firmware; + int bars; + u8 mask_interrupts; + + /* fw fault handler */ + char fault_reset_work_q_name[20]; + struct workqueue_struct *fault_reset_work_q; + struct delayed_work fault_reset_work; + + /* fw event handler */ + char firmware_event_name[20]; + struct workqueue_struct *firmware_event_thread; + u8 fw_events_off; + spinlock_t fw_event_lock; + struct list_head fw_event_list; + + /* misc flags */ + int aen_event_read_flag; + u8 broadcast_aen_busy; + u8 ioc_reset_in_progress; + u8 shost_recovery; + spinlock_t ioc_reset_in_progress_lock; + u8 ioc_link_reset_in_progress; + u8 ignore_loginfos; + u8 remove_host; + u8 wait_for_port_enable_to_complete; + + u8 msix_enable; + u16 msix_vector_count; + u32 *msix_table; + u32 *msix_table_backup; + + /* internal commands, callback index */ + u8 scsi_io_cb_idx; + u8 tm_cb_idx; + u8 transport_cb_idx; + u8 ctl_cb_idx; + u8 base_cb_idx; + u8 config_cb_idx; + struct _internal_cmd base_cmds; + struct _internal_cmd transport_cmds; + struct _internal_cmd tm_cmds; + struct _internal_cmd ctl_cmds; + struct _internal_cmd config_cmds; + + MPT_ADD_SGE base_add_sg_single; + + /* event log */ + u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; + u32 event_context; + void *event_log; + u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; + + /* static config pages */ + Mpi2IOCFactsReply_t facts; + Mpi2PortFactsReply_t *pfacts; + Mpi2ManufacturingPage0_t manu_pg0; + Mpi2BiosPage2_t bios_pg2; + Mpi2BiosPage3_t bios_pg3; + Mpi2IOCPage8_t ioc_pg8; + Mpi2IOUnitPage0_t iounit_pg0; + Mpi2IOUnitPage1_t iounit_pg1; + + struct _boot_device req_boot_device; + struct _boot_device req_alt_boot_device; + struct _boot_device current_boot_device; + + /* sas hba, expander, and device list */ + struct _sas_node sas_hba; + struct list_head sas_expander_list; + spinlock_t sas_node_lock; + struct list_head sas_device_list; + struct list_head sas_device_init_list; + spinlock_t sas_device_lock; + struct list_head raid_device_list; + spinlock_t raid_device_lock; + u8 io_missing_delay; + u16 device_missing_delay; + int sas_id; + + /* config page */ + u16 config_page_sz; + void *config_page; + dma_addr_t config_page_dma; + + /* request */ + u16 sge_size; + u16 request_depth; + u16 request_sz; + u8 *request; + dma_addr_t request_dma; + u32 request_dma_sz; + struct request_tracker *scsi_lookup; + spinlock_t scsi_lookup_lock; + struct list_head free_list; + int pending_io_count; + wait_queue_head_t reset_wq; + + /* chain */ + u8 *chain; + dma_addr_t chain_dma; + u16 max_sges_in_main_message; + u16 max_sges_in_chain_message; + u16 chains_needed_per_io; + u16 chain_offset_value_for_main_message; + u16 chain_depth; + + /* sense */ + u8 *sense; + dma_addr_t sense_dma; + struct dma_pool *sense_dma_pool; + + /* reply */ + u16 reply_sz; + u8 *reply; + dma_addr_t reply_dma; + struct dma_pool *reply_dma_pool; + + /* reply free queue */ + u16 reply_free_queue_depth; + u32 *reply_free; + dma_addr_t reply_free_dma; + struct dma_pool *reply_free_dma_pool; + u32 reply_free_host_index; + + /* reply post queue */ + u16 reply_post_queue_depth; + Mpi2ReplyDescriptorsUnion_t *reply_post_free; + dma_addr_t reply_post_free_dma; + struct dma_pool *reply_post_free_dma_pool; + u32 reply_post_host_index; + + /* diag buffer support */ + u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT]; + dma_addr_t diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT]; + u8 diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 unique_id[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23]; + u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; +}; + +typedef void (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, + u32 reply); + + +/* base shared API */ +extern struct list_head ioc_list; + +int base_attach(struct MPT2SAS_ADAPTER *ioc); +void base_detach(struct MPT2SAS_ADAPTER *ioc); +int base_map_resources(struct MPT2SAS_ADAPTER *ioc); +void base_free_resources(struct MPT2SAS_ADAPTER *ioc); +int base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type); + +void *base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid); +void *base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid); +void base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr); +dma_addr_t base_get_msg_frame_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid); +dma_addr_t base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid); + +u16 base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx); +void base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid); +void base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id, + u16 handle); +void base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id); +void base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, + u8 vf_id, u16 io_index); +void base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id); +void base_initialize_callback_handler(void); +u8 base_register_callback_handler(MPT_CALLBACK cb_func); +void base_release_callback_handler(u8 cb_idx); + +void base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +void *base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr); + +u32 base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked); + +void base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code); +int base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc, + Mpi2SasIoUnitControlReply_t *mpi_reply, Mpi2SasIoUnitControlRequest_t + *mpi_request); +int base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, + Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request); +void scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, + u8 type, u16 smid_task, ulong timeout); +void scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); +void scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); + +struct _sas_node *scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, + u16 handle); +struct _sas_node *scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER + *ioc, u64 sas_address); +struct _sas_device *scsih_sas_device_find_by_sas_address( + struct MPT2SAS_ADAPTER *ioc, u64 sas_address); + +void base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type); + +/* scsih shared API */ +void scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply); +void scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); + +/* config shared API */ +void config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +int config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys); +int config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page); +int config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage2_t *config_page); +int config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage3_t *config_page); +int config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage0_t *config_page); +int config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle); +int config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle); +int config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz); +int config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage1_t *config_page); +int config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage1_t config_page); +int config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); +int config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOCPage8_t *config_page); +int config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle); +int config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, u16 handle); +int config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle); +int config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number); +int config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number); +int config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u32 handle); +int config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 *num_pds); +int config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, u32 handle, u16 sz); +int config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form, + u32 form_specific); +int config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, + u16 *volume_handle); +int config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle, + u64 *wwid); + +/* ctl shared API */ +extern struct device_attribute *mpt2sas_host_attrs[]; +extern struct device_attribute *mpt2sas_dev_attrs[]; +void ctl_init(void); +void ctl_exit(void); +void ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +void ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); +void ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply); +void ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply); + +/* transport shared API */ +void transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +struct _sas_port *transport_port_add(struct MPT2SAS_ADAPTER *ioc, + u16 handle, u16 parent_handle); +void transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 parent_handle); +int transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev); +int transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev); +void transport_update_phy_link_change(struct MPT2SAS_ADAPTER *ioc, u16 handle, + u16 attached_handle, u8 phy_number, u8 link_rate); +extern struct sas_function_template mpt2sas_transport_functions; +extern struct scsi_transport_template *mpt2sas_transport_template; + +#endif /* MPT2SAS_BASE_H_INCLUDED */ -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
