Re: [PATCH 1/1 (resend) ] ipr: Expose debug and fastfail parameters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Acked by: Brian King <brking@xxxxxxxxxxxxxxxxxx>

Wayne Boyer wrote:
> Resending this patch that was originally sent on 1/30.
> 
> Brian, the driver version number was bumped with the MSI changes.  So,
> there's no need to bump it here.
> 
> Wayne
> 
> ---
> 
> Expose the debug and fastfail parameters to /sys/module/ipr/parameters such
> that they can be enabled/disabled at run time.
> 
> Signed-off-by: Wayne Boyer <wayneb@xxxxxxxxxxxxxxxxxx>
> ---
>  drivers/scsi/ipr.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> Index: linux-2.6/drivers/scsi/ipr.c
> ===================================================================
> --- linux-2.6.orig/drivers/scsi/ipr.c	2009-01-30 08:14:51.000000000 -0800
> +++ linux-2.6/drivers/scsi/ipr.c	2009-01-30 08:14:41.000000000 -0800
> @@ -152,13 +152,13 @@
>  MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver");
>  module_param_named(testmode, ipr_testmode, int, 0);
>  MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations");
> -module_param_named(fastfail, ipr_fastfail, int, 0);
> +module_param_named(fastfail, ipr_fastfail, int, S_IRUGO | S_IWUSR);
>  MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries");
>  module_param_named(transop_timeout, ipr_transop_timeout, int, 0);
>  MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)");
>  module_param_named(enable_cache, ipr_enable_cache, int, 0);
>  MODULE_PARM_DESC(enable_cache, "Enable adapter's non-volatile write cache (default: 1)");
> -module_param_named(debug, ipr_debug, int, 0);
> +module_param_named(debug, ipr_debug, int, S_IRUGO | S_IWUSR);
>  MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)");
>  module_param_named(dual_ioa_raid, ipr_dual_ioa_raid, int, 0);
>  MODULE_PARM_DESC(dual_ioa_raid, "Enable dual adapter RAID support. Set to 1 to enable. (default: 1)");
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


-- 
Brian King
Linux on Power Virtualization
IBM Linux Technology Center


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux