Greetings All,
This patch series adds support for PERSISTENT_RESERVE_IN Service Action
READ_FULL_STATUS for Target_Core_Mod/ConfigFS, and adds SPC-4 iSCSI TransportID
support to LIO-Target v3.0.
Here is what an active running SPC-3 compliant PERSISTENT RESERVATION setup looks
like using the PRIN SA READ_FULL_STATUS functionality with 2x active registrations
(debian w/ all_tg_pt=1 and opensuse w/ all_tg_pt=0 registrations) and an active
reservation held (debian IQN):
*) From Linux/iSCSI Initiators side using sg_persisnt from sg3_utils:
opensuse:~ # sg_persist -in --read-full-status -v /dev/sdb
Persistent Reservation In cmd: 5e 03 00 00 00 00 00 20 00 00
PR generation=0x2
Key=0x5678efff
All target ports bit set
<< Reservation holder >>
scope: LU_SCOPE, type: Write Exclusive
Transport Id of initiator:
iSCSI world wide unique port id: iqn.1993-08.org.debian:01:2dadf92d0ef
Key=0x1234ffff
All target ports bit clear
Relative port address: 0x1
not reservation holder
Transport Id of initiator:
iSCSI world wide unique port id: iqn.1996-04.de.suse:01:1661f9ee7b5
*) From Target_Core_Mod/ConfigFS for a Target_Core_Mod/IBLOCK struct block_device
attached to LIO-Target v3.0 iSCSI Target ports:
target:~# cat /sys/kernel/config/target/core/iblock_0/lvm_test0/pr/*
SPC-3 Reservation: iSCSI Initiator: iqn.1993-08.org.debian:01:2dadf92d0ef
SPC-3 Reservation: All Target Ports registration
0x00000002
SPC-3 Reservation: iSCSI Target Node Endpoint: iqn.2003-01.org.linux-iscsi.target.i686:sn.e475ed6fcdd0
SPC-3 Reservation: Portal Identifer Tag: 1 Logical Unit: 0
SPC-3 PR Registrations:
iSCSI Node: iqn.1993-08.org.debian:01:2dadf92d0ef Key: 0x000000005678efff PRgen: 0x00000000
iSCSI Node: iqn.1996-04.de.suse:01:1661f9ee7b5 Key: 0x000000001234ffff PRgen: 0x00000001
SPC-3 Reservation Type: Write Exclusive Access
SPC3_PERSISTENT_RESERVATIONS
Comments folks..?
--nab
[PATCH 1/4] [Target_Core_Mod/PERSISTENT_RESERVATION]: Change logic for all_tg_pt=[1,0]
[PATCH 2/4] [Target_Core_Mod/ConfigFS]: Add res_pr_holder_tg_port attribute
[PATCH 3/4] [Target_Core_Mod/PERSISTENT_RESERVATION]: Add support for PRIN SA READ_FULL_STATUS
[PATCH 4/4] [LIO-Target/PERSISTENT-RESERVATION]: Add support for iSCSI Transport IDs
remote: Counting objects: 35, done.
remote: Compressing objects: 100% (25/25), done.
remote: Total 25 (delta 21), reused 0 (delta 0)
Unpacking objects: 100% (25/25), done.
>From /pub/scm/linux/kernel/git/nab/lio-core-2.6
* branch master -> FETCH_HEAD
Updating ab56467..df84268
Fast forward
drivers/lio-core/iscsi_target_configfs.c | 2 +
drivers/lio-core/iscsi_target_tpg.c | 142 ++++++++++++++++++++++++-
drivers/lio-core/iscsi_target_tpg.h | 4 +-
drivers/lio-core/target_core_base.h | 4 +-
drivers/lio-core/target_core_configfs.c | 76 +++++++++----
drivers/lio-core/target_core_fabric_ops.h | 4 +-
drivers/lio-core/target_core_pr.c | 166 ++++++++++++++++++++++++----
7 files changed, 346 insertions(+), 52 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
