Re: [PATCH 3/14] lpfc 8.3.0 : Add kernel-doc headers to lpfc_scsi.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Randy,

Thanks. Looks like we have this mistake in quite a few places.

Any issue if we proceed with this patch set as is, and I'll turn around and issue another set that addresses the kernel-doc style explicitly ?

-- james s


Randy Dunlap wrote:
James Smart wrote:
lpfc 8.3.0 : Add kernel-doc function headers to lpfc_scsi.c

Add kernel-doc function headers to lpfc_scsi.c


Hi James,

kernel-doc is a small language, with a small bit of syntax. It's documented
in Documentation/kernel-doc-nano-HOWTO.txt.

I say this because all of the first lines (function name/short description)
use : instead of - to separate the name from the description.
Please fix those.

Also, the function name/short description can only be one line, so either make
it > 80 characters if needed, or use this format:

/**
 * lpfc_snaz - do some snazzy stuff
 * @hba: the target hba
 *
 * lpfc_snaz does some cool stuff and some hot stuff, such as-
 * - system snapshot to hba memory
 * - system check for infections and intrusions
 * - starts the coffee maker
 **/


Signed-off-by: James Smart <James.Smart@xxxxxxxxxx>

---

 drivers/scsi/lpfc/lpfc_scsi.c |  287 +++++++++++++++++++++++++++++++++++++++--
 1 files changed, 274 insertions(+), 13 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -92,7 +92,6 @@ lpfc_update_stats(struct lpfc_hba *phba, struct  lpfc_scsi_buf *lpfc_cmd)
      spin_unlock_irqrestore(shost->host_lock, flags);
 }

-
 /**
  * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change
  *                   event.
@@ -148,10 +147,17 @@ lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba,
      return;
 }

-/*
- * This function is called with no lock held when there is a resource
- * error in driver or in firmware.
- */
+/**
+ * lpfc_adjust_queue_depth: Post RAMP_DOWN_QUEUE event for worker thread.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine is called when there is resource error in driver or firmware.
+ * This routine posts WORKER_RAMP_DOWN_QUEUE event for @phba. This routine
+ * posts at most 1 event each second. This routine wakes up worker thread of
+ * @phba to process WORKER_RAM_DOWN_EVENT event.
+ *
+ * This routine should be called with no lock held.
+ **/
 void
 lpfc_adjust_queue_depth(struct lpfc_hba *phba)
 {
@@ -182,10 +188,17 @@ lpfc_adjust_queue_depth(struct lpfc_hba *phba)
      return;
 }

-/*
- * This function is called with no lock held when there is a successful
- * SCSI command completion.
- */
+/**
+ * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine
+ * post at most 1 event every 5 minute after last_ramp_up_time or
+ * last_rsrc_error_time.  This routine wakes up worker thread of @phba
+ * to process WORKER_RAM_DOWN_EVENT event.
+ *
+ * This routine should be called with no lock held.
+ **/
 static inline void
 lpfc_rampup_queue_depth(struct lpfc_vport  *vport,
                      struct scsi_device *sdev)
@@ -217,6 +230,14 @@ lpfc_rampup_queue_depth(struct lpfc_vport  *vport,
      return;
 }

+/**
+ * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine is called to  process WORKER_RAMP_DOWN_QUEUE event for worker
+ * thread.This routine reduces queue depth for all scsi device on each vport
+ * associated with @phba.
+ **/
 void
 lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
 {
@@ -267,6 +288,15 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
      atomic_set(&phba->num_cmd_success, 0);
 }

+/**
+ * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine is called to  process WORKER_RAMP_UP_QUEUE event for worker
+ * thread.This routine increases queue depth for all scsi device on each vport
+ * associated with @phba by 1. This routine also sets @phba num_rsrc_err and
+ * num_cmd_success to zero.
+ **/
 void
 lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
 {
@@ -336,14 +366,21 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
      lpfc_destroy_vport_work_array(phba, vports);
 }

-/*
+/**
+ * lpfc_new_scsi_buf: Scsi buffer allocator.
+ * @vport: The virtual port for which this call being executed.
+ *
  * This routine allocates a scsi buffer, which contains all the necessary
  * information needed to initiate a SCSI I/O.  The non-DMAable buffer region
  * contains information to build the IOCB.  The DMAable region contains
- * memory for the FCP CMND, FCP RSP, and the inital BPL.  In addition to
- * allocating memeory, the FCP CMND and FCP RSP BDEs are setup in the BPL
+ * memory for the FCP CMND, FCP RSP, and the initial BPL.  In addition to
+ * allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL
  * and the BPL BDE is setup in the IOCB.
- */
+ *
+ * Return codes:
+ *   NULL - Error
+ *   Pointer to lpfc_scsi_buf data structure - Success
+ **/
 static struct lpfc_scsi_buf *
 lpfc_new_scsi_buf(struct lpfc_vport *vport)
 {
@@ -452,6 +489,17 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
      return psb;
 }

+/**
+ * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
+ * and returns to caller.
+ *
+ * Return codes:
+ *   NULL - Error
+ *   Pointer to lpfc_scsi_buf - Success
+ **/
 static struct lpfc_scsi_buf*
 lpfc_get_scsi_buf(struct lpfc_hba * phba)
 {
@@ -469,6 +517,14 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
      return  lpfc_cmd;
 }

+/**
+ * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list.
+ **/
 static void
 lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 {
@@ -480,6 +536,20 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
      spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
 }

+/**
+ * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer.
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
+ * field of @lpfc_cmd. This routine scans through sg elements and format the
+ * bdea. This routine also initializes all IOCB fields which are dependent on
+ * scsi command request buffer.
+ *
+ * Return codes:
+ *   1 - Error
+ *   0 - Success
+ **/
 static int
 lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 {
@@ -681,6 +751,15 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
      lpfc_worker_wake_up(phba);
      return;
 }
+
+/**
+ * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd.
+ **/
 static void
 lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
 {
@@ -694,6 +773,16 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
              scsi_dma_unmap(psb->pCmd);
 }

+/**
+ * lpfc_handler_fcp_err: FCP response handler.
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @rsp_iocb: The response IOCB which contains FCP error.
+ *
+ * This routine is called to process response IOCB with status field
+ * IOSTAT_FCP_RSP_ERROR. This routine sets result field of scsi command
+ * based upon SCSI and FCP error.
+ **/
 static void
 lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
                  struct lpfc_iocbq *rsp_iocb)
@@ -828,6 +917,16 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
      lpfc_send_scsi_error_event(vport->phba, vport, lpfc_cmd, rsp_iocb);
 }

+/**
+ * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine.
+ * @phba: The Hba for which this call is being executed.
+ * @pIocbIn: The command IOCBQ for the scsi cmnd.
+ * @pIocbOut: The response IOCBQ for the scsi cmnd .
+ *
+ * This routine assigns scsi command result by looking into response IOCB
+ * status field appropriately. This routine handles QUEUE FULL condition as
+ * well by ramping down device queue depth.
+ **/
 static void
 lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
                      struct lpfc_iocbq *pIocbOut)
@@ -1067,6 +1166,15 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
      }
 }

+/**
+ * lpfc_scsi_prep_cmnd:  Routine to convert scsi cmnd to FCP information unit.
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine initializes fcp_cmnd and iocb data structure from scsi command
+ * to transfer.
+ **/
 static void
 lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
                  struct lpfc_nodelist *pnode)
@@ -1152,6 +1260,19 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
      piocbq->vport = vport;
 }

+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit.
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd.
+ *
+ * Return codes:
+ *   0 - Error
+ *   1 - Success
+ **/
 static int
 lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
                           struct lpfc_scsi_buf *lpfc_cmd,
@@ -1201,6 +1322,15 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
      return 1;
 }

+/**
+ * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command.
+ * @phba: The Hba for which this call is being executed.
+ * @cmdiocbq: Pointer to lpfc_iocbq data structure.
+ * @rspiocbq: Pointer to lpfc_iocbq data structure.
+ *
+ * This routine is IOCB completion routine for device reset and target reset
+ * routine. This routine release scsi buffer associated with lpfc_cmd.
+ **/
 static void
 lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
                      struct lpfc_iocbq *cmdiocbq,
@@ -1213,6 +1343,20 @@ lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
      return;
 }

+/**
+ * lpfc_scsi_tgt_reset: Target reset handler.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure
+ * @vport: The virtual port for which this call is being executed.
+ * @tgt_id: Target ID.
+ * @lun: Lun number.
+ * @rdata: Pointer to lpfc_rport_data.
+ *
+ * This routine issues a TARGET RESET iocb to reset a target with @tgt_id ID.
+ *
+ * Return Code:
+ *   0x2003 - Error
+ *   0x2002 - Success.
+ **/
 static int
 lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
                  unsigned  tgt_id, unsigned int lun,
@@ -1266,6 +1410,15 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
      return ret;
 }

+/**
+ * lpfc_info: Info entry point of scsi_host_template data structure.
+ * @host: The scsi host for which this call is being executed.
+ *
+ * This routine provides module information about hba.
+ *
+ * Reutrn code:
+ *   Pointer to char - Success.
+ **/
 const char *
 lpfc_info(struct Scsi_Host *host)
 {
@@ -1295,6 +1448,13 @@ lpfc_info(struct Scsi_Host *host)
      return lpfcinfobuf;
 }

+/**
+ * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine modifies fcp_poll_timer  field of @phba by cfg_poll_tmo.
+ * The default value of cfg_poll_tmo is 10 milliseconds.
+ **/
 static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
 {
      unsigned long  poll_tmo_expires =
@@ -1305,11 +1465,25 @@ static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
                        poll_tmo_expires);
 }

+/**
+ * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA.
+ * @phba: The Hba for which this call is being executed.
+ *
+ * This routine starts the fcp_poll_timer of @phba.
+ **/
 void lpfc_poll_start_timer(struct lpfc_hba * phba)
 {
      lpfc_poll_rearm_timer(phba);
 }

+/**
+ * lpfc_poll_timeout: Restart polling timer.
+ * @ptr: Map to lpfc_hba data structure pointer.
+ *
+ * This routine restarts fcp_poll timer, when FCP ring  polling is enable
+ * and FCP Ring interrupt is disable.
+ **/
+
 void lpfc_poll_timeout(unsigned long ptr)
 {
      struct lpfc_hba *phba = (struct lpfc_hba *) ptr;
@@ -1321,6 +1495,20 @@ void lpfc_poll_timeout(unsigned long ptr)
      }
 }

+/**
+ * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data
+ * structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ * @done: Pointer to done routine.
+ *
+ * Driver registers this routine to scsi midlayer to submit a @cmd to process.
+ * This routine prepares an IOCB from scsi command and provides to firmware.
+ * The @done callback is invoked after driver finished processing the command.
+ *
+ * Return value :
+ *   0 - Success
+ *   SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily.
+ **/
 static int
 lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 {
@@ -1405,6 +1593,12 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
      return 0;
 }

+/**
+ * lpfc_block_error_handler: Routine to block error  handler.
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ *  This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD.
+ **/
 static void
 lpfc_block_error_handler(struct scsi_cmnd *cmnd)
 {
@@ -1421,6 +1615,17 @@ lpfc_block_error_handler(struct scsi_cmnd *cmnd)
      return;
 }

+/**
+ * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data
+ *structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine aborts @cmnd pending in base driver.
+ *
+ * Return code :
+ *   0x2003 - Error
+ *   0x2002 - Success
+ **/
 static int
 lpfc_abort_handler(struct scsi_cmnd *cmnd)
 {
@@ -1516,6 +1721,18 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
      return ret;
 }

+/**
+ * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template
+ *data structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine does a device reset by sending a TARGET_RESET task management
+ * command.
+ *
+ * Return code :
+ *  0x2003 - Error
+ *  0ex2002 - Success
+ **/
 static int
 lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
 {
@@ -1633,6 +1850,17 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
      return ret;
 }

+/**
+ * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host
+ * Template data structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine does target reset to all target on @cmnd->device->host.
+ *
+ * Return Code:
+ *   0x2003 - Error
+ *   0x2002 - Success
+ **/
 static int
 lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
 {
@@ -1723,6 +1951,20 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
      return ret;
 }

+/**
+ * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data
+ * structure.
+ * @sdev: Pointer to scsi_device.
+ *
+ * This routine populates the cmds_per_lun count + 2 scsi_bufs into  this host's
+ * globally available list of scsi buffers. This routine also makes sure scsi
+ * buffer is not allocated more than HBA limit conveyed to midlayer. This list
+ * of scsi buffer exists for the lifetime of the driver.
+ *
+ * Return codes:
+ *   non-0 - Error
+ *   0 - Success
+ **/
 static int
 lpfc_slave_alloc(struct scsi_device *sdev)
 {
@@ -1784,6 +2026,19 @@ lpfc_slave_alloc(struct scsi_device *sdev)
      return 0;
 }

+/**
+ * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data
+ *  structure.
+ * @sdev: Pointer to scsi_device.
+ *
+ * This routine configures following items
+ *   - Tag command queuing support for @sdev if supported.
+ *   - Dev loss time out value of fc_rport.
+ *   - Enable SLI polling for fcp ring if ENABLE_FCP_RING_POLLING flag is set.
+ *
+ * Return codes:
+ *   0 - Success
+ **/
 static int
 lpfc_slave_configure(struct scsi_device *sdev)
 {
@@ -1813,6 +2068,12 @@ lpfc_slave_configure(struct scsi_device *sdev)
      return 0;
 }

+/**
+ * lpfc_slave_destroy: slave_destroy entry point of SHT data structure.
+ * @sdev: Pointer to scsi_device.
+ *
+ * This routine sets @sdev hostatdata filed to null.
+ **/
 static void
 lpfc_slave_destroy(struct scsi_device *sdev)
 {


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux